Home / Products
Products
Specific roofing products and shingle lines with ratings, warranties and standards. 259 entries.
- Product
ShingleVent II
ShingleVent II is a low-profile, shingle-over ridge vent with an external wind baffle and internal weather filter, printing 18 square inches of net free area per linear foot and fitting roof pitches from 3/12 to 16/12. It is made of durable copolymer resins and ships in ten 4-foot pieces per box, with reinforced nail bosses and nail holes at 16 in. and 24 in. centers. The sell sheet backs it with a "Limited Lifetime Warranty and 5-Year Replacement Plus Protection," which reimburses labor costs to remove and replace a defective vent for the first 5 years.
- Product
C4 Roof Edge
Amerimax's C4 roof edge is a 10-foot drip-edge/roof-edge trim profile listed under "Roof Edge & Trim - C Style" in the company's product catalog. It is offered in galvanized steel (Part No. 56622 unpainted, 28 ga.; 57622 white, 29 ga.; 5762219 brown, 29 ga.) and in copper (16 oz., Part No. C-4CPBD), as well as a mill-finish aluminum version (CS4 series, .0125"-.019"). It is used along eaves and rakes on steep-slope shingle roofs to direct water off the roof deck.
- Product
Amerimax Prebent Step Flashing
A pre-bent L-shaped step flashing piece, 5" x 7", bulk packed for interweaving with shingle courses at sidewalls, chimneys, and dormers. Offered in .011" aluminum (Part No. 68800BX, pack qty. 500) and 32 gauge galvanized steel (Part No. 70800, pack qty. 100).
- Product
W-Valley
Amerimax's W-Valley is a pre-formed, W-profile open-valley metal flashing sold in 10-foot lengths and multiple widths (18", 20", 24"), listed under "W-Valley & Z-Bar" in the company's product catalog. It is offered in unpainted commercial-grade galvanized steel (28 ga., e.g. Part No. 56724 for 24" x 10'), unpainted standard-grade galvanized steel (30 ga.), painted galvanized steel (30 ga.), painted aluminum (.018"), and copper (16 oz.).
- Product
ATAS Colonial Seam
ATAS International's clipless, one-piece, positive-locking standing seam panel (SKUs HCS120/HCS160/HCH110/HCH150). Panels hook into the previous panel and fasten through pre-punched slots that allow expansion and contraction, with fasteners covered by the adjacent panel. Offered in 1-inch and 1-1/2-inch seam heights with 11-3/8 to 16-3/8-inch coverages, roll-formed from .032 aluminum or 24 gauge coated steel, 70% PVDF finish in over 40 stock colors, panel lengths 3 to 25 feet, minimum 3:12 slope.
- Product
ATAS Dutch Seam
ATAS International's structural standing seam metal roof panel with an integral lock and seam, requiring no seam caps and no mechanical field seaming - panels snap onto the previously installed panel. Offered in 11-inch, 15-inch and 19-1/4-inch widths, roll-formed from .032/.040 aluminum or 24 gauge coated steel (with copper, 22 gauge steel and zinc special offerings), and can be fastened directly to purlins or solid substrate at a minimum 2:12 slope.
- Product
ATAS Field-Lok
ATAS International's non-structural, mechanically field-seamed standing seam panel family, installed with expansion clips as a single-locked or double-locked roof and offered in 1-inch, 1-1/2-inch, 2-inch, and 2-3/8-inch (Triple-Lok) seam variants. The 1-1/2-inch flagship (SKUs FLM125/FLM165/FLM207) comes in 12-1/2, 16-1/2, and 20-3/4-inch coverages with plank ribs standard, roll-formed from .032/.040 aluminum or 24/22 gauge coated steel (copper, zinc, and stainless special offerings), 70% PVDF finish in over 40 stock colors, minimum 2:12 slope, and may be curved or tapered. MCA certification 0057FLM.
- Product
ATAS PC System
ATAS International's three-part standing seam system consisting of a pan, a separate snap-on seam or batten, and a concealed clip (pan SKUs PCP110/PCP120/PCP150, seam SKU PCS114, copper pan PCP147). Non-structural and applied over solid substrate, it supports straight, tapered, and curved (convex and concave) installations in 11-1/4 to 15-1/4-inch coverages, roll-formed from .032/.040 aluminum, 24/22 gauge coated steel, or 16 oz. copper, with a 1-inch seam height, 70% PVDF finish in over 40 stock colors, and minimum 3:12 slope. MCA certification 0057PCP.
- Product
ATAS Standing Seam Shingle
ATAS International's metal shingle with a 1-inch standing seam profile, offered in 16-3/8 by 36-inch and 16-3/8 by 60-inch sizes (SKUs HSS168 and HSS169), roll-formed from .032 aluminum or 16 oz. copper with concealed fasteners and clips, smooth texture, 70% PVDF finish in over 40 stock colors, and a minimum 4:12 slope. MCA certification 0057STAN.
- Product
Atlas Briarwood Pro
Atlas's architectural shingle offered in seven high-definition color options, built with Atlas's HP42 shingle technology (a wide nailing zone) and stated by the product page to protect against winds up to 130 mph, backed by the Atlas Lifetime Limited Warranty. No fire rating, impact class, or specific ASTM/UL standards are printed on the product page, so none are recorded here.
- Product
Atlas Pinnacle Impact
Atlas's impact-resistant architectural shingle manufactured with proprietary polymer modified asphalt technology for superior hail resistance, rated UL 2218 and FM 4473 Class 4. Built on the wide-format HP42 platform (42-inch length, 6-inch exposure) with the Sweet Spot nailing area, double FASTAC sealant lines, 3M Smog-Reducing Granules, and 3M Scotchgard Protector against algae streaks. FORTIFIED Roof ready with wind coverage up to 130 mph.
- Product
Atlas Pinnacle Pristine
Atlas's flagship architectural shingle with Scotchgard Protector to resist blue-green algae staining and the Sweet Spot wide nailing zone.
- Product
Atlas Pinnacle Sun
Atlas's solar-reflective architectural shingle featuring 3M Cool Roofing Granules and 3M Scotchgard Protector, designed to keep homes cooler and resist blue-green algae staining that can degrade reflectivity over time. The product page states the shingles are "Class 3 impact resistant and guard against winds up to 130 mph"; no UL 2218 listing is named for this impact claim on the page, so this directory records it as prose rather than a rated impact class. Offered in seven Cool Roof color options.
- Product
Atlas ProLam
Atlas's value-priced laminated architectural shingle with oversized 42-inch HP42 wide-format dimensions, distinct shadow lines, and random cuts that create the texture of a multi-layered wood shake. Features the Sweet Spot nailing area, double FASTAC sealant line, built-in algae resistance, a UL 2218 Class 3 impact rating, and wind protection up to 130 mph.
- Product
Atlas StormMaster Shake
Atlas's impact-resistant shake-profile shingle built with Core4 SBS-enhanced polymer technology and a dual sealant nailing area, carrying a UL 2218 Class 4 impact rating and finished with 3M Scotchgard Protector against algae streaks.
- Product
Atlas Summit 60 Synthetic Underlayment
Summit 60 is Atlas Roofing's lightweight woven-polypropylene synthetic roof underlayment with UV and water-resistive coatings, designed as a mechanically attached alternative to #15 asphalt-saturated felt and sold in 48-inch by 250-foot 10-square rolls. Miami-Dade NOA 22-0722.06 and Florida product approval FL21350-R5 (CREEK Technical Services) both evaluate it as an ASTM D8257 polymeric underlayment on the strength of PRI Construction Materials Technologies test reports. Exposure limits differ by document: Atlas markets 60-day UV resistance, FL21350-R5 limits roof-deck exposure to 30 days, and the NOA allows up to 90 days as a temporary roof. The Atlas data sheet also lists ASTM D6757 and ASTM E108 fire resistance among its codes and compliances, but neither designation appears in the data sheet's own tested-properties table, and both third-party evaluations state that fire classification is outside their scope.
- Product
Berridge Cee-Lock
Berridge's 1-1/2-inch snap-lock standing seam roof panel for installation over solid sheathing, with concealed fasteners and 16-1/2-inch or 11-1/2-inch panel widths. Produced in 24 and 22 gauge steel and .032 aluminum, tested to ASTM E1592 wind resistance and UL 790 Class A fire resistance, and offered in more than 30 standard, metallic, premium and wood-grain colors.
- Product
Berridge Double-Lock Zee-Lock
Berridge's mechanically seamed standing seam roof and fascia panel with a 2-inch, 180-degree double-locked sidelap and 16-inch coverage width, for open framing or solid sheathing with concealed fasteners. Seamed in a single pass with the Berridge Double-Lock Zee-Lock Seamer, supplied in continuous lengths to 40 feet or site-formed with the Berridge SP-21 roll former. Available in 24 gauge steel and .032 and .040 aluminum.
- Product
Berridge Tee-Panel
Berridge's snap-on standing seam roof and fascia panel with a 1-inch seam and 12-3/4-inch coverage width, installed over solid sheathing with concealed fasteners. The snap-on seam cap integrates an extruded vinyl weatherseal to resist water infiltration. Produced in 24 gauge steel, with 22 gauge steel and .032 aluminum in limited availability, in a smooth finish across numerous colors.
- Product
Berridge Victorian Shingles
Berridge's factory-formed, prefinished metal shingle for roof, wall and fascia applications over solid sheathing, measuring 9 inches wide by 12 inches tall with 133 shingles per square and concealed fasteners. Made from 24 gauge steel with a choice of Victorian or Classic embossed patterns and factory finishes across standard, metallic, premium and natural color categories. Installation uses a J-Clip at ridges, hips and valleys with a 4-inch continuous ridge/hip cap and drip flashing at eaves.
- Product
Berridge Zee-Lock
Berridge's 2-inch mechanically seamed standing seam panel with 16-inch coverage and concealed fasteners, field-seamed in a single pass with the Berridge Zee-Lock Seamer. Produced in 24 and 22 gauge steel and .032/.040 aluminum, tested to ASTM E1592 wind resistance, UL 790 Class A fire resistance and UL 2218 impact resistance, in smooth or striated finishes.
- Product
Brava Cedar Shake
Brava's composite cedar shake tile made from recycled polymer with the hand-split texture of real cedar, available in three widths and thicknesses from 5/8 inch to 7/8 inch. Class 4 impact rated and hail warrantied, available in Class A or Class C fire-rated configurations, tested to withstand winds up to 188 mph with nails (211 mph with high-wind screw installation), with a 50-year limited warranty.
- Product
Brava Flat Tile
Brava's fourth composite roofing line, molded to create a concrete-tile style finish. Per QAI code evaluation report CERus-1014 (revision April 2025), field tile measures 17.5 by 13.75 inches at 2.7 pounds with a 14-inch installed exposure and an installed weight of 2.16 pounds per square foot (about 216 pounds per square) — the lightest of Brava's four profiles. Supplied in the Brava One formulation with designated fastener locators and a range of colors, it is UL 2218 Class 4 impact rated and approved for High Velocity Hurricane Zone use, with maximum allowable wind-uplift pressures of 109 psf (ring-shank nails) or 202 psf (#8 screws) per TAS 125. Unlike Brava's other lines, the only roof fire-classified assembly listed for Flat Tile in CERus-1014 is Class C (over Intertape Palisade synthetic underlayment) — no Class A assembly is listed for this profile. The line does not yet appear in bravarooftile.com's product navigation; the manufacturer's code evaluation report is its published source.
- Product
Brava Old World Slate
Brava's composite slate tile made from recycled polymer with a full 1-inch profile, the thickest synthetic slate available, in 12-inch standard and 6/9/12-inch multi-width sizes at a fraction of natural slate's weight. Class 4 impact rated and hail warrantied, available in Class A or Class C fire ratings, tested to withstand winds up to 188 mph with nails (211 mph with high-wind screw installation), with a 50-year limited warranty.
- Product
Brava Spanish Barrel Tile
Brava's lightweight composite barrel (Spanish) tile made from recycled materials, replicating traditional clay barrel tile without the structural support heavy clay requires. Field tile measures 13 by 16-1/2 inches at 2.9 pounds, with the system weighing 281 pounds per square. Available in Class A or Class C fire-rated versions and in standard, blended, and cool-roof colors, it is UL 2218 Class 4 impact rated per QAI code evaluation report CERus-1014 and tested to withstand winds up to 188 mph with nails (211 mph with high-wind screw installation), with a 50-year limited warranty.
- Product
Carlisle Sure-Seal FleeceBACK AFX EPDM
Carlisle's fleece-backed EPDM cap sheet, bonding a patented 7.5-ounce, 45-mil AFX fleece to the EPDM sheet with hot-melt adhesive — the fleece is specifically engineered to resist asphalt bleed-through, letting the membrane serve as the cap sheet in hot-mopped or cold-applied multi-ply hybrid systems over modified bitumen or BUR. Total sheet thicknesses are 90 or 105 mil in 4.5-foot and 10-foot widths with 3-inch or 6-inch Factory-Applied Tape seams. The product data sheet reports a -67°F brittleness point (ASTM D2137), industry-leading xenon-arc weathering resistance of 41,580 kJ/m² for the black membrane, 67% fewer seams than modified bitumen, and "excellent hail damage resistance, passing FM's severe hail test" (stated without a named UL 2218/FM 4473 class, so no impact class is recorded). A white reflective Sure-White version carries CRRC-listed radiative properties.
- Product
Carlisle FleeceBACK EPDM
Carlisle SynTec's fleece-backed EPDM single-ply membrane for commercial low-slope roofs. FleeceBACK membranes are externally reinforced for exceptional wind uplift, hail and puncture resistance, and the EPDM version is offered in Sure-Seal (black) and Sure-White versions.
- Product
Carlisle Sure-Flex PVC
Carlisle SynTec's reinforced, heat-weldable PVC single-ply membrane for commercial low-slope roofs, offered in reinforced and fleece-back constructions. Classified Type III/IV per ASTM D4434 and available with total system warranties up to 30 years.
- Product
Carlisle Sure-Seal EPDM
Carlisle SynTec's black non-reinforced EPDM single-ply rubber membrane for commercial low-slope roofs, available in 45, 60, and 90 mil thicknesses and eligible for a 30-year Golden Seal Total System Warranty.
- Product
Carlisle Sure-Weld TPO
Carlisle SynTec's thermoplastic polyolefin single-ply membrane for commercial low-slope roofs, heat-welded at the seams and available in reflective white for cool-roof performance.
- Product
CeDUR Synthetic Cedar Shakes
CeDUR's lightweight synthetic cedar shakes made with polyurethane-based technology and molded from over 50 unique natural cedar molds, offered in Live Oak, Shiloh, Golden Cedar (Title 24 compliant), and Walden colors. Class 4 impact rated and standalone Class A fire rated, manufactured in the United States, and backed by a 50-year limited warranty.
- Product
CertainTeed Arcadia Shake
Luxury asphalt shingle inspired by the iconic appearance of split wood shake. Each shingle is constructed from four layers of high-grade roofing asphalt with cutouts and variegated edges for enhanced dimensionality, delivering the look of cedar shake with asphalt durability. Includes StreakFighter algae-resistance technology and a 110 mph wind-resistance warranty upgradable to 130 mph with the required combination of CertainTeed starter shingles and hip-and-ridge accessories. CertainTeed removed Arcadia Shake from its published residential lineup and retired the dedicated product page by mid-2026; no successor product has been announced.
- Product
CertainTeed Belmont
CertainTeed's luxury asphalt shingle that replicates the color and dimension of natural slate, rated UL 2218 Class 4 for impact resistance and equipped with StreakFighter algae resistance.
- Product
CertainTeed Belmont IR
Impact-resistant version of CertainTeed's slate-inspired Belmont luxury shingle, offering the look of quarried stone. CertainTeed's own current (2026) impact-resistant-shingles page states Belmont IR delivers "Class 4 impact resistance and Class A fire resistance" but does not name UL 2218 or UL 790/ASTM E108 specifically for this product on that page, so no formal impact or fire class is listed here — the standard CertainTeed Belmont carries a UL 2218 Class 4 citation on the base product. CertainTeed's dedicated Belmont IR product page currently redirects to the CertainTeed homepage even though it is still linked from the company's luxury-shingles landing page, and wind rating and warranty terms are not published on any working official page.
- Product
CertainTeed Carriage House
Super-heavyweight luxury asphalt shingle with cut-away corners and wide, dark shadow lines that create the look of scalloped-edge natural slate. Rated UL 2218 Class 4 for impact resistance with StreakFighter algae resistance.
- Product
CertainTeed Flintlastic FR-P
Fire-resistant, polyester-reinforced, SBS-modified bitumen cap sheet for commercial low-slope roofs, mop-applied with hot asphalt or cold adhesive (distinct chemistry from the APP-modified, torch-applied Flintlastic GTA family). CertainTeed's own product page states the fire-resistant cap "can support Class A fire ratings when utilized in UL, Class A roof assemblies" — an assembly-dependent rating, so no product-level fire class is listed here. Meets ASTM D6164 Grade G, Type I and stays pliable in cold temperatures. Standard asphaltic membrane warranties run ten to twenty-five years depending on system specification and product selection, through Limited Warranty on Materials, Integrity Roof System, or Integrity Roof System No Dollar Limit coverage.
- Product
CertainTeed Flintlastic GTA
CertainTeed's granulated, torch-applied APP-modified bitumen cap sheet for commercial low-slope roof systems, with polyester reinforcement. The base member of the Flintlastic GTA cap-sheet family (distinct from the fire-rated GTA-FR and solar-reflective GTA CoolStar variants), it meets ASTM D6222 Grade G, Type I and is paired with hot-asphalt or torch-applied base sheets in a homogenous roof system. Standard asphaltic membrane warranties run ten to twenty-five years depending on system specification and product selection, through Limited Warranty on Materials, Integrity Roof System, or Integrity Roof System No Dollar Limit coverage.
- Product
CertainTeed Flintlastic GTA CoolStar
Highly solar-reflective version of CertainTeed's Flintlastic GTA torch-applied, APP-modified bitumen cap sheet, with a reflective granulated surface and polyester reinforcement to reduce thermal heat gain. Meets ASTM D6222 Grade G, Type I and can be used to comply with the 2019 California Title 24 Part 6 Cool Roof Requirements. Standard asphaltic membrane warranties run ten to twenty-five years depending on system specification and product selection, through Limited Warranty on Materials, Integrity Roof System, or Integrity Roof System No Dollar Limit coverage.
- Product
CertainTeed Flintlastic GTA-FR
Fire-resistant version of CertainTeed's Flintlastic GTA torch-applied, APP-modified bitumen cap sheet, with polyester reinforcement, for projects that require a Class A fire rating in torch-applied low-slope roof systems. CertainTeed's own product page describes it as supporting "Class A fire rated low-slope roof systems" without naming a specific fire-test standard for the product, so no product-level fire class is listed here. Meets ASTM D6222 Grade G, Type I. Standard asphaltic membrane warranties run ten to twenty-five years depending on system specification and product selection, through Limited Warranty on Materials, Integrity Roof System, or Integrity Roof System No Dollar Limit coverage.
- Product
CertainTeed Flintlastic SA
CertainTeed's self-adhering SBS-modified bitumen low-slope roofing membrane. The polyester-reinforced cap sheet is applied in base/cap or base/mid-ply/cap systems and meets ASTM D6164 Grade G, Type I, with warranted systems from 12 to 25 years depending on configuration.
- Product
CertainTeed Grand Manor
CertainTeed's luxury asphalt shingle, built with two laminated layers on a heavy base to mimic the dimensional look of natural slate. One of the heaviest and most premium asphalt shingles available.
- Product
CertainTeed Highland Slate
Premium single-layer asphalt shingle engineered to mimic the texture and depth of natural slate, built on a fiberglass mat with ceramic-coated mineral granules. Rated UL 2218 Class 3 for impact resistance with StreakFighter algae resistance.
- Product
CertainTeed Landmark
CertainTeed's flagship two-piece laminated architectural shingle, offering a dimensional wood-shake look and a broad color range.
- Product
CertainTeed Landmark ClimateFlex
Polymer-modified (rubberized) asphalt laminated shingle in the Landmark series with a UL 2218 Class 4 impact-resistance rating. ClimateFlex technology adds enhanced hail resistance, superior granule adhesion, and cold-weather pliability for low-temperature installation, plus StreakFighter algae resistance and the NailTrak nailing area.
- Product
CertainTeed Landmark Premium
Premium multi-layer laminated shingle in the Landmark series with a UL 2218 Class 4 impact-resistance rating, UL Class A fire resistance, StreakFighter algae resistance, and the NailTrak extra-wide nailing area. Carries a 15-year 110 mph wind-resistance warranty, upgradable to 160 mph with CertainTeed starter and hip-and-ridge accessories.
- Product
CertainTeed Landmark Pro
The heavier, more color-dimensional tier of CertainTeed's Landmark laminated architectural shingle line. Carries a lifetime limited transferable warranty and a 110 mph wind warranty that upgrades to 130 mph with SureStart Plus and a complete Integrity Roof System.
- Product
CertainTeed Landmark PRO Solaris
Solar-reflective architectural asphalt shingle built on CertainTeed's heavier Landmark PRO base (distinct from the standard-weight Landmark Solaris), featuring Solaris Cool Roof Technology to reduce heat absorption. CertainTeed's own product page states "UL Class A fire resistance" and "UL 2218 Class 3 impact resistance" (the page does not spell out "UL 790" for the fire rating, but UL Class A/B/C is UL 790's own classification scale for roof coverings, so the shingle carries a Class A fire rating). All colors are CRRC rated and comply with the 2022 California Title 24 Part 6 Cool Roof Requirements; select colors also comply with Los Angeles County Title 31. Carries a lifetime limited transferable residential warranty (50-year for group-owned/commercial), 10-year SureStart protection, and a 15-year 110 mph wind-resistance warranty upgradable to 160 mph with CertainTeed starter and hip-and-ridge accessories.
- Product
CertainTeed Landmark Solaris
Solar-reflective architectural asphalt shingle in the Landmark series, featuring Solaris Cool Roof Technology to reduce heat absorption. Rated UL 2218 Class 3 for impact resistance, CRRC rated, and available in colors that comply with California cool roof requirements.
- Product
CertainTeed Landmark TL
Top-tier triple-laminate luxury shingle in the Landmark series. Three laminated layers of high-grade roofing asphalt create extra thickness and a deep wood-shake profile at 13 1/4" x 40" dimensions. Includes StreakFighter algae-resistance technology and CertainTeed's lifetime limited transferable warranty with SureStart protection.
- Product
CertainTeed NorthGate ClimateFlex
An SBS-modified ("rubberized") asphalt architectural shingle engineered for cold-weather flexibility and hail resistance, carrying a UL 2218 Class 4 impact rating on a two-piece laminated fiberglass construction.
- Product
CertainTeed Presidential Shake
CertainTeed's luxury asphalt shingle with staggered, sculpted tabs that replicate the look of hand-split wood shake. A premium steep-slope shingle above the Landmark architectural line.
- Product
CertainTeed Presidential Shake IR
Impact-resistant version of CertainTeed's Presidential Shake luxury laminated shingle with a UL 2218 Class 4 impact-resistance rating. Multi-layer construction on a fiberglass base recreates the sculpted look of cedar shake, with NailTrak nailing guides, self-sealing adhesive strips, and StreakFighter algae-resistance technology backed by a 30-year algae-resistance warranty. Carries a 15-year 110 mph wind-resistance warranty, upgradable to 130 mph with CertainTeed starter and hip-and-ridge accessories, plus 10-year SureStart protection.
- Product
CertainTeed Presidential Shake TL
Luxury triple-layer laminated shingle in the Presidential series that replicates the look of cedar shakes. Features a fiberglass base with a triple-laminate design, UL 2218 Class 4 impact resistance, UL Class A fire resistance, StreakFighter algae resistance, and wind resistance up to 110 mph (upgradable to a 130 mph wind warranty with CertainTeed starter and hip-and-ridge accessories).
- Product
CertainTeed Presidential Solaris
Luxury solar-reflective asphalt shingle in the Presidential series, replicating the look of hand-split cedar shake while using Solaris Cool Roof technology to reflect the sun's rays and reduce heat absorption. Rated UL 2218 Class 3 for impact resistance and CRRC rated.
- Product
CertainTeed RoofRunner
RoofRunner is CertainTeed's synthetic roof underlayment, consisting of a woven polypropylene base with a nonwoven polyolefin sheet and a polymer back coating, installed beneath asphalt shingles and produced in 48-inch-wide by 250-foot-long rolls. Per ICC-ES ESR-4103 (reissued August 2025), RoofRunner is evaluated as a code-recognized alternative to ASTM D226 Type I and Type II felt underlayment, with fire classification testing reported in accordance with ASTM E108 (UL 790).
- Product
Vycor Ice & Water Shield
Vycor Ice & Water Shield is a self-adhered roofing underlayment consisting of a rubberized asphalt adhesive backed by a slip-resistant, high-density cross-laminated polyethylene film, used under asphalt shingles, slate, tile, cedar, and standing-seam metal roofing on sloped roofs. The membrane's RIPCORD split-release liner assists installation, and the rubberized asphalt seals around fastener penetrations to resist ice-dam and wind-driven-rain water backup.
- Product
CertainTeed XT 25
CertainTeed's traditional three-tab strip shingle, built on a durable fiberglass mat with a weather-resistant asphalt coating. Features a simple two-piece design and StreakFighter algae resistance.
- Product
Country Manor Shake
Isaiah Industries' heavily formed aluminum roofing system styled after hand-split cedar shakes, press-formed from 0.019-inch-thick, 3105 alloy, H26 temper aluminum sheet complying with ASTM B209, finished with a PVDF (Kynar 500/Hylar 5000) topcoat over a corrosion-inhibiting primer. Panels have a nominal width of 14.6 inches and length of 48.4 inches, install at approximately 47 lbs per square, and each panel carries eight simulated shake patterns with butt thicknesses ranging from 3/8 inch to 1-1/8 inches. UL Product iQ lists Country Manor Shake as a Class 4 aluminum tile shingle under UL 2218, and ICC-ES ESR-1360 rates it a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
- Product
GrandeTile
Isaiah Industries' aluminum barrel-tile-profile roofing panel sold under the Classic Metal Roofing Systems brand, capturing the look of clay barrel tiles in lightweight aluminum. Panels, pre-formed accessories, and flashings are made of .032-inch 3105 H24 aluminum alloy sheet stock (26,400 psi yield, 27,700 psi tensile) finished with a two-coat Sherwin-Williams Fluropon 70% PVDF (Kynar 500/Hylar 5000) coating, install at 67 pounds per square, and are constructed from 95% post-consumer recycled aluminum. The page states the system is "Certified through UL 580 uplift testing to handle 200+ mph wind speeds" and is designed for 3:12 or greater pitch with a maximum panel length of 19 feet. Isaiah Industries lists "UL R5100 Fire Classification" and "UL R5100 Impact Resistance" evaluation reports by title only, without printing a class, and states the product is "eligible for Class A, B, or C fire ratings" depending on assembly, so no single fire rating or impact class can be quoted for it.
- Product
Great American Shake
An aluminum shake-profile metal roofing system sold under Isaiah Industries' Green American Home brand, of identical construction to Classic Metal Roofing Systems' Rustic Shingle: press-formed from 0.019-inch-thick, 3105 alloy, H26 temper aluminum sheet complying with ASTM B209, finished with a Kynar 500 PVDF resin-based topcoat with hI-R Heat Barrier coatings, and attached with a dedicated 4009 nailing clip. Panels install at approximately 44 lbs per square. UL Product iQ lists Great American Shake as a Class 4 aluminum tile shingle (and, in its steel version, a Class 4 steel tile shingle) under UL 2218, and ICC-ES ESR-1360 rates the aluminum version a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
- Product
Oxford Shingle
Isaiah Industries' aluminum slate-profile metal shingle, press-formed from 0.024-inch-thick, 3105 alloy, H27 temper aluminum sheet complying with ASTM B209, finished with a PVDF (Kynar 500/Hylar 5000) topcoat over a corrosion-inhibiting primer. Panels have a nominal width of 12.8 inches and length of 60.6 inches, install at approximately 40 pounds per square, and each panel carries eight simulated shingle patterns. UL Product iQ lists Oxford Shingle as a Class 4 aluminum tile shingle under UL 2218, and ICC-ES ESR-1360 rates it a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
- Product
Rustic Shingle
Isaiah Industries' aluminum shake-profile metal shingle, press-formed from 0.019-inch-thick, 3105 alloy, H26 temper aluminum sheet complying with ASTM B209, finished with a PVDF (Kynar 500/Hylar 5000) topcoat over a corrosion-inhibiting primer. Panels have a nominal width of 12.8 inches and length of 24.9 inches, install at approximately 44 lbs per square, and each panel carries four simulated shake patterns. UL Product iQ lists Rustic Shingle as a Class 4 aluminum tile shingle under UL 2218, and ICC-ES ESR-1360 rates it a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
- Product
DaVinci Bellaforte Slate
DaVinci Roofscapes' synthetic composite slate tile molded from a proprietary polymer resin, roughly 75% lighter than quarried slate so it installs on standard framing. Carries a UL Class A fire rating and a UL 2218 Class 4 impact rating with a 50-year limited lifetime warranty.
- Product
DaVinci Inspire Slate
DaVinci Roofscapes' single-width composite slate tile, molded from natural slate with fine surface texture and a deckled edge. Each tile is roughly 12" wide by 18" long and about 1/4" thick, installed at 6" to 7.5" exposure, and is far lighter than quarried slate so it fits standard framing. Carries a UL Class A fire rating and a UL 2218 Class 4 impact rating, and is offered in a wide slate color range with custom multi-color blends.
- Product
DaVinci Multi-Width Slate
DaVinci's flagship synthetic slate tile in varied widths for an authentic quarried-slate look, molded from engineered polymer and rated UL 2218 Class 4 for impact.
- Product
DaVinci Province Slate
DaVinci's single-width composite slate tile that replicates traditional slate. Self-aligning single-width tiles allow quick installation; the tile is resistant to mold, algae, fire, pests, impact, and salt air, and does not curl, cup, or split. Class A fire and Class 4 impact rated, with Cool Roof colors available.
- Product
DaVinci Select Shake
DaVinci's composite shake tile molded from real hand-split wood profiles. Available in 8-inch and 10-inch widths (the 10-inch pieces carry a simulated keyway for a multi-width look), 5/8-inch thick, installable at 9-inch or 10-inch exposure. Class A fire and Class 4 impact rated, resistant to fading, rotting, cracking, and pests.
- Product
DECRA Shake
DECRA's stone-coated steel roofing panel that delivers the classic elegance and rich shadow lines of cedar shake with the endurance of stone-coated steel. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
- Product
DECRA Shake XD
DECRA's stone-coated steel roofing panel that captures the rustic tones and architectural detail of hand-split wood shake. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
- Product
DECRA Shingle XD
DECRA's stone-coated steel roofing panel with thick-cut edges that provide the dimensionality and deep shadow lines of traditional asphalt shingles, designed to last two to three times longer than asphalt. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
- Product
DECRA Tile
DECRA's stone-coated steel roofing panel that mimics the scalloped Mediterranean tile aesthetic in a lightweight steel system. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
- Product
DECRA Villa Tile
DECRA's barrel-profile stone-coated steel tile, a lightweight Mediterranean-style roof formed from 26-gauge steel with an adhered stone-granule finish. Class A fire, UL 2218 Class 4 impact, and warranted for winds up to 120 mph. A Westlake Royal Roofing Solutions brand.
- Product
Duro-Fleece
Duro-Fleece combines Duro-Last's PVC thermoplastic membrane with a 3.8 oz/sq yd needle-punched polypropylene fleece backing bonded to the underside during manufacturing, for adhered or mechanically fastened installation over substrates such as concrete, gypsum, and aged built-up roofing. It incorporates an 18x9 weft-inserted, anti-wicking polyester scrim and meets ASTM D4434 Type III requirements. It is offered in 50, 60, and 80 mil thicknesses in white, with a fleece-free selvage edge for hot-air welding between sheets.
- Product
Duro-Last EV
Duro-Last EV incorporates DuPont Elvaloy KEE (ketone ethylene ester) into Duro-Last's thermoplastic membrane formulation for added chemical resistance and cold-weather flexibility, reinforced with an 18x9 weft-inserted, anti-wicking polyester scrim. It meets ASTM D4434 Type III requirements and is offered in 50, 60, and 80 mil thicknesses in white. It can be mechanically fastened, induction-welded, or adhered, though it must not be adhered with Duro-Last Solvent-Grip spray adhesive.
- Product
Duro-Last Membrane
Duro-Last's custom-fabricated PVC single-ply roofing membrane, composed of proprietary thermoplastic PVC film laminated to both sides of an 18x14 weft-inserted, anti-wicking polyester scrim. Deck sections are factory pre-welded at up to 85% of their seams before shipping, reducing on-site seaming. Available in 40, 50, and 60 mil thicknesses (60 mil offered in white, tan, gray, and dark gray) as custom-fabricated sections or roll goods, for mechanically fastened, induction-welded, or adhered installation.
- Product
Duro-TECH TPO
Duro-TECH TPO is Duro-Last's thermoplastic polyolefin (TPO) roll-good membrane, incorporating a 9x9 weft-inserted polyester scrim between TPO films to resist wicking and eliminate the need for seam sealant. It meets or exceeds ASTM D6878 for thermoplastic-polyolefin-based sheet roofing and is offered in 45, 60, and 80 mil thicknesses in white, tan, and gray. As of the current product data sheet (revised 12/05/2025), third-party listings including UL, FM Approvals, Miami-Dade County, and the Texas Department of Insurance are noted as pending.
- Product
Duro-Tuff
Duro-Last's single-ply PVC roll-good membrane, made from a proprietary thermoplastic PVC formulation with an 18x9 weft-inserted, anti-wicking polyester scrim. It is offered in 50, 60, and 80 mil gauges in roll widths from 10 inches to 10 feet, weighing 0.28 to 0.51 lbs per square foot depending on thickness, and functions as a complete roofing system when paired with Duro-Last's custom-fabricated accessories, insulation, and cover board. Certified NSF/ANSI 347 Gold, and UL and FM approved per Duro-Last, with 15-year to 30-year No Dollar Limit warranty options including a High Wind NDL.
- Product
Eagle Bel Air
Eagle's most popular flat concrete roof tile, with a smooth, untextured face and clean tailored lines that suit Modern, Contemporary, Craftsman, and Transitional architecture. Part of Eagle's flat tile lineup, which is durable against snow loads, high winds, and hail, and qualifies as a Class A roof covering.
- Product
Eagle Capistrano
Eagle Roofing's Capistrano concrete roof tile, a Spanish-style S-profile barrel tile for steep-slope roofs. A Class A, non-combustible tile available in standard and lightweight versions.
- Product
Eagle Double Eagle Bel Air
Eagle's flat concrete roof tile with a smooth surface and a split-tile appearance whose slight texture adds subtle differentiation and depth to the roofscape. Offered in neutral, muted earth tones such as natural grays, tans and browns, and suited to Mid-century, Transitional, Craftsman, Bungalow, Florida Style, Colonial and Contemporary homes. Not available in all regions.
- Product
Eagle Golden Eagle
Flat concrete roof tile from Eagle Roofing Products with a textured, wood-shake-inspired face that adds depth and dimension. Offered in Eagle's Classic Collection in conventional weight, in blended and range colorways rated by the CRRC for reflectivity. Regional availability varies.
- Product
Eagle Malibu
Eagle's medium profile concrete roof tile with a double-S shape and gentle curves that recreate the classic Mediterranean roofscapes of Italy, France and Greece. Positioned for distinctive homes, apartments, hotels and commercial buildings, it measures 12-3/8 inches wide by 17 inches long with a 3-inch headlap and 88 field tiles per 100 square feet, in standard, Eaglelite and Florida weights. Offered in diverse color blends, many of which are Cool Roof rated and can qualify for LEED points.
- Product
Eagle Ponderosa
A concrete roof tile profile from Eagle Roofing Products, one of Eagle's interlocking tile profiles covered by ICC-ES report ESR-1900. When installed per the report the assembly achieves an ASTM E108 Class A fire rating.
- Product
Eagle Tapered Slate
Eagle's flat concrete roof tile styled after traditional slate, with a smooth texture, beveled sides and an aggressive chamfered edge treatment for authentic depth and dimension. Part of Eagle's flat tile lineup, which qualifies as a Class A roof covering and is durable against snow loads, high winds and hail. Offered in six earth-tone blends with per-color energy ratings and CRRC listings; not available in all regions.
- Product
EcoStar Concrete Flat Tile
EcoStar Concrete Flat Tile is a simulated flat concrete roof tile made with up to 80% upcycled polymers, offering the sleek, modern look of real concrete at a fraction of the weight, with easier installation than natural concrete tile. The product line includes 12" wide tiles plus hip and ridge accessory tiles, 3/4" thick for an enhanced shadow line, with 10" and 9" exposure options for staggered or offset installation and a 22" tile length providing 2" headlap at 10" reveal / 4" headlap at 9" reveal. A polymer composite tile replicating a concrete flat tile profile, not actual concrete.
- Product
EcoStar Island Groove Clay
EcoStar Island Groove Clay is a simulated clay roof tile made with up to 80% upcycled polymers, engineered to reproduce the rich texture and natural tone variation of handcrafted clay tile at up to 70% less weight than natural clay. The product line includes 12" wide tiles plus hip and ridge accessory tiles, 5/8" thick for an enhanced shadow line, with 10" and 9" exposure options for staggered or offset installation and a 22" tile length providing 2" headlap at 10" reveal / 4" headlap at 9" reveal. A polymer composite tile replicating a clay tile profile, not actual clay.
- Product
EcoStar Shake Tiles
EcoStar's synthetic cedar shake tiles manufactured from up to 80% post-industrial recycled materials and molded from authentic cedar shakes, offered in a 3/8-inch-thick Traditional (standard shadow line) profile, a 3/4-inch-thick Niagara (enhanced shadow line) profile, and a varied shadow line Aspen Blend. UL 2218 Class 4 hail impact rated, UL 790 Class C or A fire rated, and wind rated per ASTM D3161 Class F (110 mph), with a 50-year limited material warranty (transferable labor-and-material coverage available).
- Product
EcoStar Slate Tiles
EcoStar's synthetic slate tiles manufactured from upcycled materials, offered in a 1/4-inch-thick Traditional (standard shadow line) profile in multiple widths and designer shapes, and a 5/8-inch-thick Niagara (enhanced shadow line) profile in 10-, 12-, and 14-inch widths, including random-width blends. UL 2218 Class 4 hail impact rated, UL 790 Class C or A fire rated, and wind rated per ASTM D3161 Class F (110 mph), with a 50-year limited material warranty (transferable labor-and-material coverage available).
- Product
Englert A1000
A cost-effective architectural metal roofing system with a narrow snap-lock standing seam and concealed clips and fasteners, requiring no mechanical seaming or separate seam cap. The panel can be notched and bent to provide a smooth transition from roof to fascia or mansard, and is suited to sloped roofs and other exterior surfaces of light commercial and residential projects. Englert's page cites ASTM E84 Class A, which is an interior flame-spread rating rather than a UL 790/ASTM E108 roof-covering fire class. The page also lists UL 580 Class 90 and Florida building code compliance. Englert states no warranty duration or coverage type for this panel.
- Product
Englert A1101/1120
A 1-inch integral snap-lock standing-seam metal roof panel with a clipless hidden-fastener design that requires no mechanical seaming or separate seam cap. Suited to light-duty commercial roofs, residential applications, and mansard/canopy work on a solid deck. Tested to UL 580 Class 90 for wind uplift and Miami-Dade County product approval, and ASTM-tested for water and air infiltration. The page also cites ASTM E84 Class A, which is an interior flame-spread rating rather than a UL 790/ASTM E108 roof-covering fire class. Florida Building Code compliant.
- Product
Englert A1301
A 1-inch mechanically seamed architectural metal roof panel with concealed clips and fasteners, offering the same detailing capability as Englert's snap-lock panels plus tight-radius curving capacity. Required for shallow- slope applications under 3:12 pitch and suited to fascias, walls, soffits, and mansards. Englert's page cites ASTM E84 Class A, which is an interior flame-spread rating rather than a UL 790/ASTM E108 roof-covering fire class. No UL 580 wind-uplift class is stated for this profile. The page references general "weather tightness warranties" without naming a duration or coverage type.
- Product
Englert S2400
A 2-inch mechanically seamed structural metal roof system, one of Englert's strongest mechanically seamed panels, available in both single-lock and double-lock details for increased spanning capabilities and able to be radius curved. Englert's page cites ASTM E84 Class A, which is an interior flame-spread rating rather than a UL 790/ASTM E108 roof-covering fire class. The page also lists ASTM E1592 testing, ASTM water and air testing, UL 580 Class 90, Dade county testing, and Florida building code compliance. The page references general "weather tightness warranties" without naming a duration or coverage type.
- Product
Englert S3000
A nominal 3-inch-deep structural T-seam standing-seam metal roof panel built for heavy industrial and large commercial buildings, designed for wide structural spans and long, low-slope panel runs (under 3:12 pitch) with a wide mechanical seam. ASTM-tested for water and air infiltration, ASTM E1592 tested for structural wind-uplift performance, and FM tested (specific FM standard not stated on this page). The page also cites ASTM E84 Class A, which is an interior flame-spread rating rather than a UL 790/ASTM E108 roof-covering fire class. Florida Building Code compliant. The page references general "weather tightness warranties" without naming a duration or coverage type.
- Product
Englert Series 2000
Englert's most popular metal roof system, a 1-3/4-inch integral snap-lock standing seam panel that combines architectural versatility with the spanning and uplift capabilities of a structural system. Rated Class A per ASTM E84, tested to ASTM E1592 and UL 580 Class 90, carries Miami-Dade and TDI approvals, and requires a minimum 3:12 slope.
- Product
Beaumont Shake
Euroshield's shake-profile shingle made of recycled tire rubber (approximately 95% recycled material overall), providing a classic wood shake appearance without mold, excess moisture absorption, curling, warping, or cracking. The manufacturer describes it as lighter weight than its Ranchlands Shake while still supplying considerable strength and durability, sold at a price point between asphalt shingles and premium roofing products. Distinct from the hail-proof Beaumont Shake HP variant; like all Euroshield products it is warrantied for 50 years against hail of two inches or less in diameter. Euroshield's technical information page states all profiles are UL 2218 Class 4 listed impact rated, per QAI Code Evaluation Report Listing No. CERus-1013.
- Product
Beaumont Shake HP
Euroshield's hail-proof, cedar-shake-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), with vertical grooves and grain texture styled to replicate hand-split cedar shake. Rated UL 2218 Class 4 for impact resistance and stated to withstand sustained wind gusts up to 170 mph, it ships as a 40 in. x 21 in. panel weighing approximately 265 lbs per square, in Black, Grey, Brown, and Driftwood. It carries Euroshield's Hail Proof Warranty against hail impact damage greater than 2 inches in diameter for the first 20 years, reverting to the standard Basic Hail Warranty (2 inches or less) for the remaining 30 years of the 50-year limited pro-rated warranty term.
- Product
Ranchlands Shake
Euroshield's heavyweight wood-shake-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), with deep shadow lines and long vertical graining styled to replicate real wood shake. Rated UL 2218 Class 4 for impact resistance, it ships as a 36 in. x 22.5 in. panel weighing approximately 310 lbs per square, in Black, Grey, Brown, and Driftwood. Like Rundle Slate, it carries Euroshield's standard Basic Hail Warranty (hail impact of 2 inches or less) for the full 50-year limited pro-rated warranty term, without the HP lines' any-size hail-proof provision.
- Product
Rundle Slate
Euroshield's extra-thick, chiselled-edge slate-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), designed with coarse edge texturing and strong shadow lines to replicate hewn natural slate. Rated UL 2218 Class 4 for impact resistance, it ships as a 36 in. x 22.5 in. panel weighing approximately 360 lbs per square, in Black, Grey, Brown, and Driftwood. Unlike Euroshield's HP lines, Rundle Slate carries the standard Basic Hail Warranty (hail impact of 2 inches or less) for the full 50-year limited pro-rated warranty term, without an added any-size hail-proof provision.
- Product
Vermont Slate
Euroshield's slate-profile shingle made of recycled tire rubber (approximately 95% recycled material overall), described by the manufacturer as its most realistic and refined slate style, delivering the look of premium slate without the weight or expense of real stone. Distinct from the hail-proof Vermont Slate HP variant: the standard Vermont Slate is covered by a hail damage warranty for hailstones two inches in diameter or less for 50 years, while the HP variant carries a 20-year any-size-hail guarantee. Euroshield's technical information page states all profiles are UL 2218 Class 4 listed impact rated, per QAI Code Evaluation Report Listing No. CERus-1013.
- Product
Vermont Slate HP
Euroshield's hail-proof, slate-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), styled to replicate the look of natural slate. Rated UL 2218 Class 4 for impact resistance, it ships as a 40 in. x 21 in. panel weighing approximately 265 lbs per square, in Black, Grey, Brown, and Driftwood. It carries Euroshield's Hail Proof Warranty against hail impact damage greater than 2 inches in diameter for the first 20 years, reverting to the standard Basic Hail Warranty (2 inches or less) for the remaining 30 years of the 50-year limited pro-rated warranty term.
- Product
F-Wave REVIA Classic Slate
F-Wave's slate-look synthetic shingle made from commercial-grade polymer, offered in three stone-inspired colors (Royal, Black, Gray). Class A fire-rated and 150-mph wind rated with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind damage, hail, algae, and color fading. F-Wave's resources page lists the REVIA line's standards passed as UL 2218 / FM 4473 Class 4 hail resistance, FM 4475 Very Severe Hail, ASTM D3161 Class F and D7158 Class H wind, and ASTM E108 / UL 790 Class A fire, under Intertek listing CCRR-0283.
- Product
F-Wave REVIA Designer Slate
F-Wave's premium synthetic slate-look shingle made from commercial-grade polymer in tough single-piece construction with no granules, no asphalt, and no layers to delaminate. Offered in Estate Series and American Blends profiles. Class 4 hail rated with warranted hail coverage, Class A fire rated, and 150-mph wind rated with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind, hail, algae, and color fading.
- Product
F-Wave REVIA Hand-Split Shake
F-Wave's synthetic hand-split shake shingle made from commercial-grade polymer in single-piece construction with no granules or asphalt, replicating rustic wood shake styling in colors such as Mountain Cedar and Lakeshore Gray. Carries a Class 4 hail warranty, Class A fire rating, and 150-mph wind rating with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind, hail, algae, and color fading.
- Product
GAF Camelot II
GAF's designer asphalt shingle with an artisan-crafted slate-like shape, oversized tabs, and a custom European-inspired color palette, offered at a fraction of the cost of traditional slate. Carries a UL 2218 Class 4 impact-resistance rating and GAF Time-Release Algae-Fighting Technology.
- Product
Cobra Rigid Vent 3
Cobra Rigid Vent 3 is GAF's shingle-over ridge exhaust vent, printing 18 square inches of net free ventilating area per linear foot for roof pitches of 3:12 to 16:12. It is engineered from UV-resistant polymers, sold in a non-filtered version for warmer climates, and available in 9 in. (for 10 in.-width ridge cap shingles) and 11.5 in. (for 12 in.-width ridge cap shingles) widths with an EasyTear sizing feature and included 3 in. corrosion-resistant ring shank nails. The data sheet states it "passes the 110 mph wind-driven rain test per TAS 100(A)" under controlled laboratory testing, and is eligible for up to a Lifetime Limited Warranty only when installed with GAF Lifetime shingles and at least two additional qualifying GAF accessories. The data sheet also lists Miami-Dade County and State of Florida product approvals, Texas Department of Insurance Product Evaluation RV-29, and a UL 790 Class C listing whose footnote refers to actual assemblies in the UL Online Certification Directory.
- Product
GAF EverGuard Extreme TPO Smooth Membrane
GAF's enhanced-formulation TPO commercial roofing membrane for high-heat and solar applications, built on the same core TPO construction as standard EverGuard TPO but with an added weathering package. Heat-welded seams, inherent flexibility, long-term heat and UV resistance, fungal resistance, and high reflectivity (white only). Offered in 50, 60, 70, and 80 mil thicknesses in 10- and 12-foot rolls; suitable for mechanically attached, induction-welded, and adhered single-ply systems. GAF states the enhanced weathering package allows a guarantee of up to 35 years for qualified systems, described as the longest in the industry, with guarantee terms dependent on the specific system construction.
- Product
GAF EverGuard Extreme TPO Fleece-back Membrane
GAF's enhanced-formulation fleece-back TPO commercial roofing membrane, suitable for re-cover applications or where strong protection against foot traffic, punctures, and hail is needed, avoiding the expense of tearing off an existing roof. Offers inherent flexibility, heat-welded seams, long-term heat and UV resistance, fungal resistance, and high reflectivity (white only). Installable via mechanically attached, adhered (EverGuard WB181 Bonding Adhesive, hot asphalt, or low-rise foam adhesives), or induction- welded single-ply systems. GAF states guarantees are available up to 30 years when using this fleece-back membrane, with terms dependent on the specific system construction and attachment method used.
- Product
GAF EverGuard PVC Smooth Membrane
GAF's single-ply PVC commercial roofing membrane offering strong protection against UV exposure, weather, and chemicals. Highly flexible, weldable, and repairable, and suitable for all types of single-ply systems including mechanically attached, fully adhered, and RhinoBond induction-welded installations. Available in 50, 60, and 80 mil thicknesses in white, gray, and tan.
- Product
GAF EverGuard PVC Fleece-back Membrane
GAF's fleece-back single-ply PVC commercial roofing membrane, offering protection against UV exposure and weather along with enhanced protection against hail and punctures from the factory-applied polyester fleece backing. Highly flexible, weldable, and repairable; suitable for mechanically attached, ballasted, and fully adhered single-ply systems. Available in white, gray, and tan, in 50, 60, and 80 mil thicknesses (full 10-foot and half 5-foot rolls).
- Product
GAF EverGuard TPO Smooth Membrane
GAF's single-ply TPO commercial roofing membrane with heat-welded seams, inherent flexibility, long-term heat and UV resistance, fungal resistance, and high reflectivity in white, energy tan, and energy gray. Offered in 10- and 12-foot rolls in a variety of thicknesses; the membrane construction has remained unchanged for more than 20 years with over 6 billion square feet sold. Suitable for mechanically attached and adhered low-slope systems.
- Product
GAF EverGuard TPO Fleece-back Membrane
GAF's fleece-back single-ply TPO commercial roofing membrane, suitable as a recover option to avoid tearing off an existing roof system before installing a new one. Heat-welded seams provide a large welding window; available in 45, 60, 80, 100, 115, and 135 mil thicknesses across two data sheets. Installable via mechanically attached or adhered application (EverGuard WB181 Bonding Adhesive, LRF low-rise foam adhesives, or OlyBond500 canister system). GAF states guarantees are available up to 30 years when using this fleece-back membrane, with terms dependent on the specific system construction and attachment method used.
- Product
GAF FeltBuster Synthetic Roofing Felt
FeltBuster Synthetic Roofing Felt is GAF's value-priced, non-asphaltic polypropylene synthetic roof underlayment installed beneath asphalt shingles to help protect against wind-driven rain. It ships in 10-square (1,000 sq ft) rolls, 48 in. wide by 250 ft. long, weighing approximately 23 lb per roll, with a spunbond top surface for traction and UV-stabilized construction rated for up to 90 days of UV exposure. GAF's sell sheet states the product "meets or exceeds the physical requirements of ASTM D226 Type II, ASTM D8257, and ASTM D4869 Types III and IV."
- Product
GAF Grand Canyon
GAF's ultra-premium designer laminated shingle with an authentic rugged wood-shake look created by oversized 17" x 40" tabs and a dimensional, sculpted profile. Features Dura Grip adhesive to seal each shingle and reduce blow-off risk, StainGuard protection against blue-green algae discoloration, and a lifetime limited transferable warranty with Smart Choice Protection coverage in the initial non-prorated period.
- Product
GAF Grand Sequoia
GAF's oversized, artisan-crafted designer laminated shingle that mimics the rugged look of wood shakes. The standard (non-AS) Grand Sequoia is a lifetime shingle rated to 130 mph but is not impact-rated; the separate Grand Sequoia AS adds a UL 2218 Class 4 rating.
- Product
GAF Grand Sequoia AS
The impact-resistant version of GAF's Grand Sequoia designer shingle, built with oversized tabs for a rugged wood-shake look and passing the UL 2218 Class 4 impact test.
- Product
GAF Grand Sequoia RS
Cool-roof Lifetime Designer Shingle with a genuine wood-shake look, using EcoDark granules and an extra-large design with oversized tabs. Rated by the Cool Roof Rating Council, can be used to comply with California Title 24 cool roof requirements and the Los Angeles Green Building Code, and carries a UL 2218 Class 4 impact-resistance rating.
- Product
GAF LIBERTY SBS Self-Adhering Roofing System
GAF's SBS-modified, self-adhering peel-and-stick roll roofing system for low-slope residential roof areas such as porches, garages, carports, and sheds. Installs without torches, open flames, or hot asphalt; the system comprises the LIBERTY Self-Adhering Cap Sheet and Base/Ply Sheet with LIBERTY Asphalt Primer and Flashing Cement accessories. When installed as a complete 2-ply system it passes UL 2218A Class 4 impact-resistance testing.
- Product
GAF Marquis WeatherMax
GAF's top-of-the-line traditional 3-tab asphalt/fiberglass strip shingle, positioned above Royal Sovereign in the 3-tab range and marketed for outstanding all-weather performance. Offered in a regional color palette including Autumn Brown, Charcoal, Golden Cedar, and Weathered Gray, and backed by a 30-year limited transferable warranty with Smart Choice Protection.
- Product
GAF Royal Sovereign
America's best-selling 3-tab asphalt shingle, made with advanced color sequencing technology and Color Lock ceramic-fired granules for a rich, vivid design at a value price. Includes StainGuard protection against blue-green algae discoloration.
- Product
GAF RUBEROID 20 Smooth Membrane
GAF's SBS-modified bitumen commercial roofing membrane with a core of strong, resilient non-woven fiberglass mat coated with flexible, SBS polymer-modified asphalt and a smooth (non-granulated) surface. Installed roof designs weigh less than three pounds per square foot. GAF states system guarantees are available for up to 20 years, with terms dependent on the specific system construction.
- Product
GAF RUBEROID HW Granule Membrane
GAF's SBS-modified bitumen commercial roof cap sheet with a core of strong, resilient non-woven polyester mat coated with SBS polymer-modified asphalt and surfaced with mineral granules. Installs without hot asphalt; heat welding allows kettle-free operation, and a poly burn-off film supports easy installation. Installed roof designs weigh less than two pounds per square foot. GAF states typical system guarantees are available for up to 15 years, with select system constructions available with up to a 20-year guarantee.
- Product
GAF RUBEROID HW Smooth Membrane
GAF's SBS-modified bitumen commercial roofing membrane with a core of strong, resilient non-woven polyester mat coated with flexible, polymer-modified asphalt and a smooth surface; heat-weld installations with a smooth surface must be protected with additional surfacing. Installed roof designs weigh less than two pounds per square foot. GAF states system guarantees are available for up to 20 years, with terms dependent on the specific system construction.
- Product
GAF RUBEROID MOP Smooth Membrane
GAF's heavy-duty, hot-mopped (asphalt-applied) SBS-modified bitumen commercial roofing membrane with a core of strong, resilient non-woven polyester mat coated with flexible, SBS polymer-modified asphalt. Used for new roofing, reroofing, flashing construction, and repairs of built-up roofing or other modified bitumen systems. Installed roof designs weigh less than two pounds per square foot. GAF states guarantee coverage of up to 20 years is available on select systems.
- Product
GAF RUBEROID Torch Granule Membrane
GAF's torch-applied APP-modified bitumen commercial roof cap sheet, with a core of strong, resilient non-woven polyester mat coated with weather-resistant APP polymer-modified asphalt and surfaced with mineral granules. Installed roof designs weigh less than two pounds per square foot. GAF states typical system guarantees are available for up to 15 years, with select system constructions available with up to a 20-year guarantee.
- Product
Shingle-Mate Roof Deck Protection
Shingle-Mate Roof Deck Protection is a fiberglass-reinforced asphalt roofing felt used beneath asphalt shingles to resist wind-driven rain infiltration. It lies flatter than conventional organic felt to reduce wrinkle telegraphing through the finished shingle roof and is lighter than a comparable No. 30 asphalt felt. GAF's data sheet states the product "meets or exceeds the physical requirements of ASTM D226, Type II and ASTM D4869."
- Product
GAF Slateline
GAF's designer asphalt shingle with bold shadow lines and tapered cut-outs that create the appearance of natural slate at a fraction of the cost. Carries a UL 2218 Class 4 impact-resistance rating and GAF Time-Release Algae-Fighting Technology.
- Product
StormGuard Film-Surfaced Leak Barrier
StormGuard Film-Surfaced Leak Barrier is a self-adhering, fiberglass- reinforced leak barrier with a blue synthetic patterned surface, rated for use with asphalt shingles and most metal roofing systems. It is installed at eaves, rakes, valleys, and around chimneys and skylights to help prevent leaks caused by wind-driven rain and ice dams, self-sealing around fastener penetrations.
- Product
GAF Timberline AS II
GAF's SBS-modified, impact-resistant architectural shingle in the Timberline family, engineered with a rubberized asphalt for flexibility and passing the UL 2218 Class 4 impact test.
- Product
GAF Timberline HDZ
GAF's flagship laminated architectural asphalt shingle, featuring the LayerLock design and a wide StrikeZone nailing area. The best-selling shingle in North America.
- Product
GAF Timberline HDZ RS
Cool-roof version of GAF's Timberline HDZ laminated architectural shingle using EcoDark granules for deep, rich reflective colors, including the darkest highly reflective shingle color (Charcoal). CRRC rated and can be used to comply with 2025 California Title 24, Part 6 and the Los Angeles County Green Building Standards Code. Features LayerLock Technology with the StrikeZone nailing area and carries a UL 2218 Class 3 impact rating.
- Product
GAF Timberline NS
Value-priced laminated architectural shingle in the Timberline family with a classic natural shadow effect for a subtle, even-toned architectural look. Uses Dura Grip adhesive and qualifies for GAF's Lifetime Limited Warranty; eligible for the 15-year WindProven Limited Wind Warranty when installed with LayerLock Technology and four qualifying GAF accessories.
- Product
GAF Timberline UHDZ
GAF's premium laminated architectural shingle built on the high-performance UltraMat fiberglass mat, combining the LayerLock/StrikeZone nailing design with a UL 2218 Class 4 impact rating and GAF's deepest shadow bands.
- Product
WeatherWatch Mineral-Surfaced Leak Barrier
WeatherWatch Mineral-Surfaced Leak Barrier is a self-adhering, fiberglass-reinforced leak barrier with a traditional mineral surface for use with asphalt shingle roof systems. It is installed at eaves, rakes, valleys, and around chimneys and skylights to help prevent leaks caused by wind-driven rain, ice dams, and backed-up gutters, self-sealing around fastener penetrations.
- Product
GAF Woodland
Value Collection Lifetime Designer Shingle that recreates the look of hand-cut European shingles with artisan-crafted shapes, oversized tabs, and a dimensional design, at a fraction of the cost of slate or wood shakes. Carries a UL 2218 Class 4 impact-resistance rating and GAF's Advanced Protection Shingle Technology.
- Product
Grip-Rite Roofing Nail (Electrogalvanized)
Grip-Rite's hand-drive roofing nail line for securing asphalt shingles, insulation board, and felt to wood roof decks. The electrogalvanized nails are 11 gauge with a smooth shank, diamond point, and 7/16-inch flat head, in lengths from 1/2 inch to 3-1/2 inches and packaging from 1-pound boxes to 50-pound cartons; the same product family also lists hot-dip galvanized ring-shank SKUs and a 9-gauge 6-inch tile roofing nail. The product page states the nails are "Designed to conform to ASTM F1667" and cautions they are not for use in treated lumber or where surface rust is unacceptable.
- Product
Henry 208 Wet Patch Roof Leak Repair
Henry 208 Wet Patch Roof Leak Repair is a trowel- or cartridge-applied, refined-asphalt roof cement that stops leaks instantly on wet or dry surfaces, including standing water, and is used to repair holes, cracks, and splits and to seal leaks around flashings, chimneys, vents, and skylights on composition, mineral-surfaced cap sheet, asphalt-coated, SBS modified, metal, and masonry roofs.
- Product
Elevate PVC Roofing Membrane
Elevate's core PVC single-ply membrane (the brand formerly known as Firestone/Holcim Elevate), a chemical- and grease-resistant, reflective cool-roof thermoplastic for low-slope commercial roofs. The PVC family page states Elevate's PVC membranes "are available in a range of thicknesses and widths, from 50 mil to 80 mil and 5' to 10' widths," within a line that also includes KEE, InvisiWeld, and XR variants. The product page's footnotes cite ASTM E108 fire-resistance test results for the membrane's assemblies, but Elevate's published pages do not print a roof-covering fire class for this specific product.
- Product
Elevate RubberGard EPDM
A single-ply EPDM synthetic rubber membrane for commercial low-slope roofs, available fully adhered, mechanically attached, or ballasted. Sold under Elevate (formerly Firestone Building Products, then Holcim Elevate; the Elevate brand is now part of the Amrize family of brands as of the June 2025 Holcim/Amrize spin-off). The live product page confirms the same fully-adhered/mechanically-attached/ballasted installation options as before and states RubberGard EPDM has been in the field since 1980.
- Product
Elevate UltraPly TPO
Elevate's (formerly Firestone Building Products, then Holcim Elevate; the Elevate brand is now part of the Amrize family of brands as of the June 2025 Holcim/Amrize spin-off) polyester-reinforced thermoplastic polyolefin single-ply membrane for commercial low-slope roofs. The dedicated UltraPly TPO product page confirms it is "Available in thicknesses of .045", .060" and .080"" and "Available in reflective white, tan or gray," and that white and tan UltraPly TPO membranes are CRRC (Cool Roof Rating Council) listed and meet California Title 24 energy standards.
- Product
Elevate UNA-CLAD UC-3 Roofing Panel
Elevate's UNA-CLAD UC-3 Roofing Panel, "a factory formed double-lock, architectural standing seam metal roof panel that provides a traditional look and utilizes mechanical seaming," per the Warranted UNA-CLAD products page. The page cites "proven high wind performance capabilities" (no mph figure printed) and notes the panel can be curved and tapered for complex architectural geometry. UC-3 is among the UNA-CLAD systems (UC-3, UC-4, UC-6, UC-6 HD, UC-14) eligible for Elevate's 35-Year Platinum Warranty — eligibility is conditional ("may qualify"). Select UC panels are also backed by Red Shield warranty coverage in architectural applications.
- Product
IKO ArmourCool Granular TP-HD-Cap
IKO's reflective, heat-welded SBS modified bitumen cap sheet for cool-roof applications. A composite polyester/glass-fiber-scrim reinforced mat is coated with SBS polymers and asphalt to a finished 5.0 mm (197 mils), then topped with highly reflective white ceramic granules (SRI of 82 or higher) for UV protection and solar reflectance.
- Product
IKO Armourplast Granular APP
IKO's granulated APP modified bitumen cap sheet for commercial low-slope roofs, built on a polyester mat reinforced with glass fiber strands and coated to roughly 4.2 mm (165 mils). Mineral granules shield the surface from UV; it's heat-welded as the top ply in a flashing detail or as the protective cap of a conventional built-up roof.
- Product
IKO Armourshake
IKO's heavyweight designer shingle offering the weathered look and depth of cedar shakes. Constructed of two fiberglass mats laminated together for a double-layer of asphalt. Class 3 impact resistance standard, with a Class 4 option available in Shadow Black only. Standard 110 mph wind resistance, upgradeable to 130 mph with IKO PROFORMAX accessories under the High Wind Limited Warranty Upgrade.
- Product
IKO ArmourStick HD-Cap
IKO's self-adhering (peel-and-stick) SBS modified bitumen cap sheet for commercial low-slope roofs. Built on a reinforced composite nonwoven mat coated with SBS polymers and asphalt to about 4.5 mm (177 mils), with an isolated underside lap strip that's heat-welded for the final seal, eliminating an open-flame torch pass across the full sheet.
- Product
IKO Cambridge
IKO's popular architectural laminated asphalt shingle, built on a fiberglass core with FastLock sealant. A mainstream dimensional shingle with a Limited Lifetime warranty.
- Product
IKO Cambridge Cool Colors Plus
Solar-reflective version of IKO's Cambridge architectural laminated shingle. Embedded infrared-reflective pigments deliver a Solar Reflectance Index (SRI) of 20 or greater, exceeding California Title 24, Part 6 roof reflectivity requirements by 25 percent. Features FastLock sealant bonding to help prevent shingle lift, blue-green algae-resistant granules, and a 110 mph limited wind warranty upgradable to 130 mph with the high-wind application. Offered in nine colors and available in select U.S. regions.
- Product
IKO Crowne Slate
IKO's premium designer shingle that mimics the appeal of natural slate tiles, with a 10-inch exposure and a uniformly square profile. Two-layer laminated fiberglass construction (oxidized-asphalt lower shim with modified-asphalt upper "dragon's teeth") gives it a Class 4 impact resistance rating. Standard 110 mph wind resistance, upgradeable to 130 mph with IKO's high wind application.
- Product
IKO Dynasty
IKO's performance architectural shingle featuring the ArmourZone reinforced nailing band for high wind and fastener pull-through resistance.
- Product
IKO Dynasty Cool Colors Plus
Solar-reflective version of IKO's Dynasty performance laminated shingle. Embedded infrared-reflective pigments deliver a Solar Reflectance Index (SRI) of 20 or greater, exceeding California Title 24, Part 6 roof reflectivity requirements by 25 percent. Retains the tear-resistant woven ArmourZone reinforced nailing surface for high-wind and pull-through resistance, blue-green algae-resistant granules, a UL 2218/FM 4473 Class 3 impact rating, and a 130 mph limited wind warranty. Available in select U.S. regions.
- Product
IKO Marathon Plus AR
IKO's time-tested traditional 3-tab shingle built on a fiberglass mat, with embedded algae-resistant granules that help control black streaks caused by blue-green algae. Metric sizing (39 3/8 in x 13 1/4 in, 5 5/8 in exposure) is larger than many comparable shingles in its class for faster installation.
- Product
IKO Modiflex MP-250-Cap
IKO's fully adhered SBS modified bitumen cap sheet for commercial low-slope roofs, applied by mopping hot asphalt or an IKO-approved cold process adhesive rather than heat-welding. Built on a polyester mat reinforced with glass fiber strands, coated top and bottom with SBS polymers and asphalt to about 3.8 mm (150 mils), with UV-protective ceramic granules on the exposed surface.
- Product
IKO Nordic
IKO's polymer-modified architectural shingle reinforced for flexibility and tear resistance, earning a UL 2218 Class 4 impact rating that acts like a shock absorber against hail.
- Product
IKO PrevENt MP-HD-Cap
IKO's fire-resistant, fully adhered SBS modified bitumen cap sheet for commercial low-slope roofs, mopped in hot asphalt or an IKO-approved cold process adhesive. A composite polyester/glass-fiber-scrim reinforcement is combined with expandable graphite for exterior fire resistance, coated with SBS polymers and asphalt to about 3.8 mm (150 mils), with UV-protective ceramic granules on the sanded-underside sheet.
- Product
IKO PrevENt TP-HD-Cap
IKO's fire-resistant, heat-welded SBS modified bitumen cap sheet for commercial low-slope roofs. A composite polyester/glass-fiber-scrim reinforcement is combined with expandable graphite for added exterior fire resistance, then coated with SBS polymers and asphalt to about 4.0 mm (158 mils) with UV-protective ceramic granules. IKO markets it as a "Class A rated" cap sheet.
- Product
IKO Royal Estate
IKO's designer shingle combining premium natural-slate looks with heavy-duty construction and added asphalt. Random-cut contours and deep shadow bands create architectural depth, with algae-resistant granules to inhibit blue-green algae discoloration. Rated UL 2218 Class 3 for impact resistance and carries a 110 mph limited wind warranty, upgradable to 130 mph with the high-wind application. Available in Harvest Slate, Mountain Slate, Shadow Slate, and Taupe Slate.
- Product
IKO Torchflex TP-250-Cap
IKO's heat-welded (torch-applied) SBS modified bitumen cap sheet for commercial low-slope roofs. Built on a polyester mat reinforced with glass fiber strands and coated top and bottom with SBS polymers and asphalt to about 4.0 mm (158 mils), with UV-protective ceramic granules. Used as the top ply of a built-up roof or a two-ply modified bitumen system.
- Product
IKO Torchflex TP-HD-Cap
Heavy-duty version of IKO's heat-welded Torchflex cap sheet, using a composite reinforcement (non-woven polyester plus a glass fiber scrim in both directions) for extra dimensional stability. Coated top and bottom with SBS polymers and asphalt to about 4.0 mm (158 mils) with UV-protective ceramic granules; serves as the top ply of a two-ply SBS modified bitumen system.
- Product
DynaLastic 250 FR CR G
Johns Manville's fire-retardant, heavy-duty polyester-reinforced SBS modified bitumen cap or flashing sheet for multi-ply roofing systems, surfaced with bright white reflective roofing granules for cool-roof performance. The membrane blends elastomeric SBS rubber and asphalt with fire-retardant additives, offers full recovery after 100% elongation, and is manufactured to ASTM D6164 Type II Grade G.
- Product
GlasKap Plus
Johns Manville's fiberglass-reinforced, SBS-modified bitumen, mineral-surfaced cap sheet used as the final ply in a variety of built-up roofing systems. Its SBS synthetic rubber and asphalt blend lets the membrane lay flat, virtually eliminating wrinkles for faster installation, and provides better elongation and cold flexibility than traditional asphaltic cap sheets. The fiberglass reinforcement mat provides low moisture absorption and dimensional stability, and the top surface is protected with ceramic-coated granules. Manufactured to ASTM D3909.
- Product
JM EPDM
Johns Manville's cured, nonreinforced ethylene propylene diene monomer (EPDM) single-ply membrane for commercial low-slope roofs, available in 45, 60 and 90 mil sheets. Fully extruded rather than calendered, yielding fewer air voids, more uniform thickness and smoother sheets, with UV-stabilization for outstanding ozone and weather resistance.
- Product
JM PVC
Johns Manville's heat-weldable polyvinyl chloride thermoplastic single-ply membrane for commercial low-slope roofs, formulated with Elvaloy KEE (Ketone Ethylene Ester) polymer for plasticizer retention and extended roof life. Reinforced with a non-wicking polyester scrim and an aramid-fiber edge, and inherently resistant to oils, air conditioning coolants, fuels and grease.
- Product
Johns Manville JM TPO
Johns Manville's thermoplastic polyolefin single-ply membrane for commercial low-slope roofs, heat-welded at the seams and available in reflective white for cool-roof performance.
- Product
Karnak 19 Flashing Cement
Karnak 19 Flashing Cement is an asphalt-based flashing cement compounded with selected asphalts, mineral fibers, and refined solvents to a heavy trowel consistency, used for general-purpose repair of leaks in shingles, concrete, metal, or asphalt roofs and flashings on walls, chimneys, flues, downspouts, and cornices. It is available in Summer, Semi, and Winter grade consistencies.
- Product
Karnak 19 Ultra Rubberized Flashing Cement (Wet/Dry)
Karnak 19 Ultra Rubberized Flashing Cement is an asbestos-free, rubberized elastomeric flashing cement compounded with rubber-reinforced asphalt and mineral fibers for trowel application in wet or dry conditions, including underwater. It is used for emergency leak repair and flashing detail on shingles, concrete, metal, and SBS/APP modified bitumen roofs, and is available in Summer, Semi, and Winter grade consistencies.
- Product
Universal Standing Seam
Isaiah Industries' residential steel standing seam roof sold under the Kassel & Irons brand. Panels are produced from USA-made G90 galvanized steel at .0216-inch metal thickness before paint, in 12-inch and 16-inch widths with standard lengths of 6, 10, and 12 feet (custom lengths available), and feature a 1.5-inch-tall snap-action seam with an integral fastening hem for concealed fasteners and slotted holes that allow thermal expansion and contraction. Finished with a baked-on protective primer and a Kynar 500 or Hylar 5000 PVDF resin-based coating with reflective pigment; minimum roof pitch is 2:12. No ASTM/UL standards, wind rating, or fire rating are printed on the product or specifications pages, so none are recorded here.
- Product
Ultimate Pipe Flashing for Shingle Roofs - Stainless Steel
A compression-seal pipe boot for steep-slope shingle, slate, tile, and cedar-shake roofs, with a flashing plate deep-drawn from 0.0197" thick 316L marine-grade stainless steel (brush-rolled finish) and a molded silicone seal bushing with a rigid PVC compression collar. The flashing plate provides 4" of margin on each side, 5-1/2" at the top, and 3" at the bottom, and the seal accommodates roof pitches from flat to 18/12. It is sized for Schedule 40 PVC DWV vent pipe in 1-1/4", 1-1/2", 2", 3", and 4" diameters; other pipe materials require a Lifetime Tool EASYSleeve or EASYFit adapter. Also available in 24-gauge galvanized dark bronze Kynar-coated steel.
- Product
Lomanco 750 Slant-Back Vent
The Original 750 is Lomanco's slant-back static roof louver (box/turtle vent), with an overall size of 16 x 20-5/16 x 5 in., an 8 in. opening, and 50 sq in of net free area. As part of Lomanco's 700 Series roof louvers, it is made of embossed aluminum finishes (with 750-G/750-GS galvanized steel and 750 copper offered as specialty variants), features an upward-discharging louver design intended to prevent roof discoloration and bird/animal intrusion, and is offered in mill finish, brown, white, black, weathered bronze, and forest green (aluminum only). The product-listing table marks the base 750 model with Miami-Dade County, Texas Department of Insurance (TDI), and CSA approval checkmarks; the 750-S variant (metal screen insert) adds a WUI (Wildland Urban Interface) prescriptive-compliance checkmark.
- Product
Lomanco OmniRidge OR-4
OmniRidge is Lomanco's shingle-over ridge vent, sold in 4-foot stick sections (model OR-4) with a net free area of 72 sq in per 4-foot piece, equal to 18 square inches of net free area per linear foot. It fits roof pitches from 2/12 to 16/12, features an external venturi baffle, weatherproof under-lapping joint, external water shield, and 8 drain holes (4 per foot per side). All Omni Series Shingle-Over Ridge Vents ship with a lifetime limited warranty and are stated to last as long as the roof's shingles. The catalog's product-listing table also marks OR-4 with Miami-Dade County, Texas Department of Insurance (TDI), and CSA approval checkmarks alongside its ICC-ES listing, plus WUI (Wildland Urban Interface) prescriptive compliance.
- Product
Ludowici Century Shake
Ludowici's Century Shake is a thick-profile interlocking terra cotta tile with pressed grooves and a lightly scratched, hand-split base texture that mirrors the appearance of real wood shakes. Century Shake Premier is offered in three tile sizes (5-1/2", 7-3/16", and 10-1/2" wide, all 14-1/2" long) for a random-width, more authentic shake-roof look. Comes standard in 7 colors (Aged Cedar, Earth Gray, Ebony Mist, Golden Red Cedar, Sienna, Western Cedar, White Cedar) and can be customized to any standard Ludowici color blend. Recommended minimum slope is 3:12.
- Product
Ludowici Greek
Featuring a pan-and-cover system of angular caps and flat pans, Ludowici's Greek clay barrel tile is patterned from the ancient monumental buildings of Greece, with a smooth base texture (custom textures available: Battered Butts, Brushed Butts). Available in all standard and custom Ludowici colors, mists, and blends. Overall size 12" x 12-3/4" with a 12" C.C. x 10" exposure, 3-1/4" nominal installed barrel height off deck, and a 5:12 recommended minimum slope.
- Product
Ludowici LudoSlate
Ludowici's LudoSlate is a lightweight interlocking terra cotta tile featuring the chiseled edges and quarried-slate base texture of natural slate, installable in straight rows or staggered. LudoSlate Premier offers three random-width tile sizes (5-3/4", 7-3/4", and 10-3/4" x 16") for a more authentic, field-blended appearance. Rated ASTM Grade 1 and marketed by Ludowici as Class A fire resistant (standard not named on the product page), it is available in 12 standard slate color blends.
- Product
Ludowici Roman
Patterned from the ancient monumental buildings of Rome, Ludowici's Roman is a pan-and-cover barrel clay roof tile system comprised of round caps and flat pans, with a smooth base texture (custom textures available: Battered Butts, Brushed Butts, Hand Slushed). Available in all standard and custom Ludowici colors, mists, and blends. Overall size 12" x 12-3/4" with a 12" C.C. x 10" exposure, 3-1/4" nominal installed barrel height off deck, and a 5:12 recommended minimum slope.
- Product
Ludowici Spanish 13
Ludowici's one-piece barrel Spanish clay tile in the 13-1/4-inch format, producing the classic rippled pattern of Spanish tile roofing. Comes standard with a smooth surface (customizable with additional textures) and is available in all standard and custom Ludowici colors, mists, and blends. Overall size 9-3/4" x 13-1/4" with an 8-1/4" x 10-1/4" exposure, 3" nominal installed barrel height off deck, and a 4:12 recommended minimum slope. Also offered in an 18-3/8" profile (see Ludowici Spanish 18).
- Product
Ludowici Spanish 18
Ludowici's classic one-piece barrel Spanish clay tile in the 18-3/8-inch format, producing the distinctive rippled pattern synonymous with clay tile roofs. Overall size 9-3/4 by 18-3/8 inches with an 8-1/4 by 15-3/8 inch exposure, smooth base texture with optional custom textures, and available in all standard and custom Ludowici colors, mists, and blends.
- Product
Malarkey Dura-Seal AR
Malarkey's traditional 3-tab shingle (SKU 203) and one of the industry's only 3-tab shingles built on NEX polymer-modified (rubberized) asphalt, which earns it a UL 2218 Class 4 hail impact rating rarely seen in the economy 3-tab category. Metric-sized (13-1/4" x 39-3/8", 5-5/8" exposure, 66 shingles/square), it carries 3M smog-reducing and algae-resistant granules. Backed by a limited 25-year shingle warranty with a 60 mph limited wind warranty (upgradeable to 70 mph in an enhanced Malarkey system) and a 5-year algae-resistant system warranty.
- Product
Malarkey Highlander
Malarkey's core architectural shingle made with NEX polymer-modified (rubberized) asphalt blending high-grade asphalt with upcycled rubber and plastic polymers. Carries a Class 3 hail impact rating and smog-reducing granules, with wind warranty coverage up to 130 mph in an enhanced system.
- Product
Malarkey Legacy
Malarkey's premium SBS polymer-modified (rubberized asphalt) architectural shingle, rated UL 2218 Class 4 for impact resistance and incorporating NEX smog-reducing granules.
- Product
Malarkey 430 OmniSeal Cap
Malarkey's self-adhered SBS polymer-modified (rubberized) asphalt cap sheet for commercial low-slope roofing, part of the OmniSeal system. The adhesive is activated by sunlight, radiant heat, and applied pressure, eliminating open-flame torch application. Fire resistance is assembly-dependent (the manufacturer's own comparison table lists ASTM E108 Class B & C, with page copy describing "Class B fire rated in a system assembly over a combustible or non-combustible deck"). The manufacturer states an extended system warranty of "up to 17 years," available only when installed as part of a complete Malarkey roofing system by a Malarkey Certified Contractor.
- Product
Malarkey 502 Pano Cap
Malarkey's hot-asphalt-applied, fiberglass-reinforced conventional (non-modified) asphalt cap sheet for commercial low-slope built-up roofing, used as the top, exposed ply of a 2-4 layer multi-ply system. The manufacturer states an extended system warranty of "up to 20 years," available only when the product is installed as part of a complete Malarkey low-slope roofing system.
- Product
Malarkey 601 Paragon MOD Cap
Malarkey's hot-asphalt-applied SBS polymer-modified (rubberized) asphalt cap sheet for commercial low-slope roofing, reinforced with fiberglass and used as the top, exposed ply of a 2-4 layer modified-bitumen system. The manufacturer states an extended system warranty of "up to 30 years," available only when the product is installed as part of a complete Malarkey low-slope roofing system.
- Product
Malarkey Vista
Malarkey's NEX polymer-modified (rubberized) asphalt architectural shingle, engineered with upcycled rubber and plastic for all-weather resilience and a UL 2218 Class 4 hail impact rating.
- Product
Malarkey Windsor
Malarkey's designer-profile shingle built on NEX polymer-modified (rubberized) asphalt, which blends SBS rubber and plastic polymers into the asphalt core for a UL 2218 Class 4 impact rating and enhanced granule adhesion.
- Product
Maze STORMGUARD R107
The Maze STORMGUARD R107 is a 2-1/2 in., 0.120 in. (11-gauge) smooth-shank, diamond-point asphalt/fiberglass shingle nail with a double hot-dip galvanized (STORMGUARD) zinc coating for extra corrosion resistance in coastal areas, used for new construction and re-roofing.
- Product
238T
McElroy Metal's symmetrical mechanically seamed standing seam panel with a 2 3/8-inch seam and matching left/right seam legs, so panels are non-directional and individually replaceable. Available in 16, 18, and 24-inch widths (24-inch formed on-site only) in plank-and-pencil, plank, striated, minor-rib, or flat profiles. Standard substrate is 24 gauge Galvalume steel (50 ksi), with 22 gauge Galvalume, .032/.040 aluminum, or 20 oz. copper optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Installs on slopes down to 1/2:12 (1/4:12 with prior approval) in continuous factory lengths up to 200 feet.
- Product
Max-Rib
McElroy Metal's exposed-fastener corrugated panel with a 3/4-inch rib height on 9-inch centers and 36-inch coverage width (38/38.5-inch overall width). Standard substrate is 29 gauge Galvalume steel (80 ksi), with 24 and 26 gauge (50 ksi) optional, finished in Acrylic Coated Galvalume, Kynar 500 PVDF, or siliconized polyester/polyester. Installs over plywood or purlins on slopes down to 1:12, with tape sealant required in the side-laps on slopes between 3:12 and 1:12; standard panel lengths run up to 40 feet.
- Product
Maxima
McElroy Metal's mechanically seamed, concealed-fastener standing seam family, field-seamed to a 90-degree lock with factory-applied in-seam sealant. Offered in four configurations - Maxima 1.5 (1.5-inch seam), Maxima 2 and Maxima ADV (2-inch seam), and Maxima 3 (3-inch seam) - in panel widths from 12 to 24 inches. Standard substrate is 24 gauge Galvalume steel (50 ksi, ASTM A792), with 22 gauge Galvalume or .032-inch aluminum optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Minimum slope ranges from 1/4:12 to 1:12 depending on configuration.
- Product
Medallion-Lok
McElroy Metal's snap-lock, concealed-fastener standing seam panel with a 1 3/4-inch seam height, available in 12, 16, and 18-inch panel widths in striated, ribbed (pencil rib), or flat pan profiles. Standard substrate is 24 gauge Galvalume steel, with 22 gauge Galvalume or .032/.040 aluminum optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Installs on slopes down to 3:12 over solid deck or open framing.
- Product
Meridian
McElroy Metal's clipless, snap-together standing seam panel with a 0.91-inch rib height, fastened to solid decking through a prepunched flange rather than separate clips. Available in 12 and 16-inch panel widths, standard 24 gauge Galvalume steel (26 gauge also offered on the 16-inch width), finished in Galvalume Plus acrylic or Kynar 500 PVDF. Requires a minimum 3:12 roof slope over solid decking.
- Product
Metal Sales Classic Rib
Metal Sales Manufacturing's exposed-fastener low-profile panel with 36-inch coverage and 3/4-inch bell-top trapezoidal ribs on 9-inch centers. Offered in 29 and 26 gauge with MS Colorfast45 or acrylic-coated Galvalume finishes in ENERGY STAR listed colors, for roof, wall, liner, ceiling and soffit applications over open framing or solid substrate at a minimum 3:12 slope.
- Product
Metal Sales Image II
Metal Sales Manufacturing's architectural standing seam roof panel with 12-, 16- or 18-inch coverage and a concealed clip designed for thermal movement, installed over solid substrate at a minimum 3:12 slope. Standard in 26 and 24 gauge (22 gauge optional) with PVDF, MS Colorfast45 or acrylic-coated Galvalume finishes, and rated UL 580 Class 90, UL 790 Class A and UL 2218 Class 4.
- Product
Metal Sales Magna-Loc 180
Metal Sales Manufacturing's architectural/structural standing seam roof system with a 2-inch vertical rib, 16-inch coverage and an integral mechanically seamed 180-degree sidelap with factory-applied sealant. Concealed clips accommodate thermal movement and 1/2-inch to 6-inch blanket insulation, on roof slopes as low as 1/2:12. Formed from ASTM A792 aluminum-zinc alloy-coated Grade 50 steel (0.0230-inch or 0.0296-inch minimum thickness) or ASTM B209 .032 aluminum, in PVDF or acrylic-coated Galvalume finishes.
- Product
Metal Sales Pro-Panel II
Metal Sales Manufacturing's exposed-fastener low-profile roof and wall system with a 3/4-inch bell-top trapezoidal rib on 9-inch centers and 36-inch panel coverage, applied over open framing or solid substrate at a minimum 3:12 roof slope. Offered in 29 and 26 gauge with MS Colorfast45, ColorFit40, acrylic-coated Galvalume and galvanized finishes, and marketed for pole barns, storage sheds, utility buildings and light commercial construction as well as wall, liner, soffit, ceiling and fencing uses.
- Product
Metal Sales Vertical Seam
Metal Sales Manufacturing's architectural standing seam roof panel with a concealed-fastener vertical seam. Tested to ASTM E1592 and UL 580 Class 90 wind uplift and UL 2218 Class 4 impact, and offered with a PVDF (Kynar 500) finish.
- Product
Mule-Hide APP Torch Base/Cap
Mule-Hide's polyester-reinforced APP (Atactic Polypropylene) modified bitumen roofing membrane designed for heat-welded (torch) application as a base sheet, interply, cap sheet or flashing in new roofing, recover (retrofit) and flashing details. Constructed with premium APP resins and a smooth surface with a polyolefin backing, it is applied over an acceptable substrate as part of a multi-ply system and is not intended for direct application to a combustible substrate. Meets ASTM D6222 Type I requirements. The product data sheet lists Factory Mutual, Underwriters Laboratories, Miami-Dade, Florida Product Approval, ICC-ESR and Texas Department of Insurance as code approvals "available," directing installers to contact Mule-Hide's technical department for product-specific ratings; no UL 790/ASTM E108 roof covering class is stated for this product, and the data sheet instructs installers to verify the fire rating of the roofing assembly over any combustible substrate.
- Product
Mule-Hide SA-SBS Cap Sheet
Mule-Hide's premium self-adhering, polyester-reinforced SBS (Styrene Butadiene Styrene) modified bitumen cap sheet, manufactured with Adeso dual-compound technology: an SBS modified asphalt compound on top and a pressure-sensitive adhesive compound on the bottom, covered by a split release liner. Finished with granules on the top surface, it features SEALLap ULTRA self-adhesive side laps and FASTLap granule-free end laps, requires no hot asphalt, fumes or torch for installation, and is also used as a flashing membrane. Meets ASTM D6164 Type I, Grade G (granular) and ASTM D1970. A companion SA-SBS Cap Sheet FR (fire-retardant) product data sheet is also published. The data sheet lists Factory Mutual, Underwriters Laboratories, Miami-Dade, Florida Product Approval, ICC-ESR and Texas Department of Insurance as code approvals "available," directing installers to contact Mule-Hide's technical department for product-specific ratings; no UL 790/ASTM E108 roof covering class is stated for this product.
- Product
Mule-Hide Standard EPDM
Mule-Hide's non-reinforced elastomeric EPDM single-ply roofing membrane for commercial low-slope roofs, used in ballasted and fully adhered systems for new construction and re-roofing. Available in 45, 60 and 90 mil thicknesses in widths from 7 to 50 feet, with optional factory-applied 3-inch or 6-inch seam tape.
- Product
Mule-Hide Standard TPO
Mule-Hide's polyester-reinforced thermoplastic polyolefin single-ply membrane for commercial low-slope roofs, used in mechanically attached and fully adhered systems in new construction, reroofing and recover applications. Available in 45, 60 and 80 mil thicknesses and widths from 4 to 16 feet, pre-printed with lap lines and fastener spacing.
- Product
Mule-Hide TPO Fleece Back
Mule-Hide's polyester-reinforced, fleece-backed thermoplastic polyolefin membrane for fully adhered and mechanically attached commercial roofing systems in new construction, reroofing and recover (retrofit) applications, installed over an acceptable roof insulation or other suitable substrate. Available in 45, 60 and 80 mil thicknesses with a 55 mil fleece liner, in 6' and 12' widths, pre-printed with lap lines. The fleece backing allows mechanical attachment without a cover board and is noted by Mule-Hide for excellent hail resistance; end laps are butted and stripped in with Standard TPO membrane recommended for flashing. Fully adhered installations use Mule-Hide AquaBase 120 or Helix Low-Rise Adhesive with a segmented weighted roller to ensure proper adhesion. Up to a 30-year system warranty is available. A separate FR (fire-retardant) product data sheet is also published for this product; the page does not state a specific UL 790 roof covering class, which is deck/assembly dependent.
- Product
Newpoint Barcelona 900
Concrete barrel roof tile in Westlake Royal's Newpoint concrete tile line, designed to reflect the classic Spanish mission style. Offers the strength and durability of concrete tile with a Class A fire rating and a wide range of colors and blends. Color availability varies by region.
- Product
Newpoint Saxony 900 Shake
Concrete roof tile in Westlake Royal's Newpoint concrete tile line, styled to replicate wood shake. The Newpoint line offers Class 4 impact resistance and a Class A fire rating, with Cool Roof options, and is designed to resist hail, high winds, fire and intense UV exposure. Colors include Charcoal and Hickory; availability varies by region.
- Product
Newpoint Saxony 900 Slate
Concrete roof tile in Westlake Royal's Newpoint concrete tile line, styled to replicate natural slate. The Newpoint line offers Class 4 impact resistance and a Class A fire rating, with Cool Roof options, and is designed to resist hail, high winds, fire and intense UV exposure. Colors include White and Brown Blend; availability varies by region.
- Product
Oatey Aluminum No-Calk Roof Flashing (Standard Base)
A rustproof stamped-aluminum roof pipe flashing with a self-sealing collar that slides over the vent pipe and requires no caulking. Product No. 12920 fits a 1-1/4" - 1-1/2" pipe on a 9" x 12-1/2" aluminum base, is rated for metal-base roof pitches of 0-40 degrees (up to 10/12), and is rated for 180F continuous heat and approved for Type B vent installations.
- Product
OMG Assembled CR-Base Sheet Fastener
The OMG Assembled CR-Base Sheet Fastener is a one-piece fastener formed from G-90 galvanized steel, coated with OMG's CR-10 corrosion-resistant coating and assembled with a 2.75-in. diameter Galvalume plate, used to secure base sheets to poured lightweight insulating concrete or gypsum decks. It is installed with an OMG MultiPogo or wooden mallet.
- Product
OMG Heavy Duty Roofing Fastener (#14)
The OMG Heavy Duty Roofing Fastener (#14) is a heavier-shank, deep-thread self-drilling fastener designed to secure insulation to steel, wood, and structural concrete decks, and to secure membrane to wood and concrete decks. It is coated with OMG's CR-10 corrosion-resistant coating and is available in lengths from 1 1/4-in. to 24-in.
- Product
Owens Corning Berkshire Collection
Owens Corning's designer laminate asphalt shingle, with a thickness, proportion, and color palette that evoke natural slate. A premium steep-slope shingle above the Duration architectural line.
- Product
Owens Corning TruDefinition Duration
Owens Corning's flagship laminated architectural shingle with the SureNail Technology reinforced nailing strip for improved wind resistance and fastener holding.
- Product
Owens Corning TruDefinition Duration COOL
Cool-roof version of the Duration series architectural laminated shingle, with specially designed granules in rich colors that reflect the sun's rays to help keep homes comfortable and energy efficient. Built on patented SureNail Technology, the woven engineered-fabric reinforced nailing zone used across the Duration series, and rated by the Cool Roof Rating Council (CRRC) for California energy-code compliance.
- Product
Owens Corning TruDefinition Duration COOL Plus
Solar-reflective architectural laminated shingle in the Duration series, designed with solar-reflecting granules that help decrease heat transfer into the home while providing bold color contrast and added dimension. Patented SureNail Technology and Tru-Bond sealant support a 130 mph limited wind-resistance warranty with standard installation. Meets California Title 24, Part 6 cool roof requirements, the Los Angeles County Green Building Standards Code, and the City of Los Angeles Cool Roofs Ordinance.
- Product
Owens Corning TruDefinition Duration Designer
Laminated architectural shingle in the Duration Series offering the Designer Color Collection of bold, high-contrast color blends, built with Owens Corning's patented SureNail Technology reinforced nailing strip. Carries UL 2218 Class 3 impact resistance and algae resistance coverage.
- Product
Owens Corning TruDefinition Duration FLEX
An SBS polymer-modified impact-resistant architectural shingle that pairs Owens Corning's patented SureNail Technology nailing strip with a rubberized asphalt for a UL 2218 Class 4 impact rating and improved cold-weather tear strength.
- Product
Owens Corning TruDefinition Duration MAX
Heavyweight architectural laminated shingle in the Duration series that combines the bold, thick, high-profile appearance of a wood shingle with patented SureNail Technology, a woven engineered-fabric reinforced nailing zone with a triple-layer common bond area. SureNail's grip supports a 130 mph limited wind-resistance warranty with standard four-nail installation, and TruDefinition color technology delivers deep, vibrant color contrast.
- Product
Owens Corning Duration Premium
Laminated architectural shingle in the Duration Series with a thick, dimensional wood-shake-like appearance, built with Owens Corning's patented SureNail Technology reinforced nailing strip. Marketed as a heavyweight option suited to Homeowner Association (HOA) specs; carries UL 2218 Class 3 impact resistance. Distributed with limited availability, primarily in Western U.S. markets.
- Product
Owens Corning Duration STORM
The SBS-modified, impact-resistant version of Owens Corning's Duration architectural shingle, combining the SureNail Technology nailing strip with a rubberized asphalt that passes the UL 2218 Class 4 impact test.
- Product
Owens Corning Oakridge
Owens Corning's entry architectural (laminate) shingle, offering a dimensional look at a value price. Rated to 110 mph with standard four-nail application and to 130 mph with six nails plus Owens Corning starter shingles.
- Product
Owens Corning ProArmor Synthetic Roof Underlayment
ProArmor is Owens Corning's synthetic roof underlayment with Fusion Back Coating Technology, used beneath asphalt or metal roofing as a water-repelling secondary barrier. It withstands UV exposure for up to 90 days and ships in 42 in. by 286 ft. rolls providing 929 sq ft of coverage with a 3 in. overlap. Its data sheet also notes ASTM E108/UL 790 Class A fire resistance with the underlayment tested as part of a roof assembly.
- Product
Owens Corning Supreme
Owens Corning's entry-level three-tab asphalt shingle, positioned as a basic, economical choice balancing weather resistance and value, with 10-year algae resistance coverage and a 25-year limited warranty.
- Product
Owens Corning Woodcrest
Thick premium architectural shingle with a rustic, textured appearance designed to create the look of wood shake without the maintenance. Certified to UL 2218 Class 4 impact resistance and carries 25-year algae resistance coverage.
- Product
Owens Corning Woodmoor
Premium architectural shingle that resembles wood shake with greater durability and less maintenance, thicker and heavier than Woodcrest with more dramatic layered detailing. Certified to UL 2218 Class 4 impact resistance and carries 25-year algae resistance coverage.
- Product
Cascade
PABCO's distinctive diamond-shaped signature cut shingle designed for historical-style homes, with a shape that accentuates steeply sloped roofs with vintage aesthetic appeal. Rated UL 790 Class A for fire resistance and 110 mph standard / 130 mph high-wind-application wind resistance, offered in three color options. No impact class is stated on the product page, so none is recorded here.
- Product
Paramount
Paramount is PABCO's original signature-cut, open-tooth architectural shingle and the founding product of the Signature Cut line, a laminated fiberglass shingle at a nominal 349 pounds per square. It is rated UL 790 / ASTM E108 Class A for fire resistance, UL 2218 Class 4 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
- Product
Paramount Advantage
Paramount Advantage is a heavyweight, open-tooth architectural shingle in PABCO's Signature Cut line, positioned above Paramount at a nominal 483 pounds per square. It is rated UL 790 / ASTM E108 Class A for fire resistance, UL 2218 Class 4 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
- Product
PABCO Premier
PABCO Premier is a laminated architectural shingle built on a heavyweight fiberglass mat saturated with asphalt and surfaced with mineral granules, offered in 8 color options. It is rated UL 790 Class A for fire resistance, UL 2218 Class 3 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
- Product
Premier Radiance
PABCO's solar-reflective laminated architectural shingle, infused with solar-reflective granules that reflect heat-producing ultraviolet rays back into the atmosphere, which may reduce heat transfer into the home. Rated UL 790 Class A for fire resistance, UL 2218 Class 3 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, offered in four Cool color options.
- Product
PABCO Prestige
PABCO Prestige is a heavyweight, laminated architectural shingle built on a fiberglass mat saturated with asphalt and surfaced with mineral granules, designed for custom homes, commercial steep-slope installations, and demanding environments. It is rated UL 2218 Class 4 for impact resistance, UL 790 Class A for fire resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
- Product
Perma-Boot 312 Repair System
A gasketless retrofit pipe-boot system, made from a UV-stabilized polymer, that slides over an existing failed roof vent flashing to stop leaks without removing shingles and installs with no tools. The PBR 312 retrofit line covers 1-1/2", 2", 3" and 4" vent pipes (item numbers 82870-82880), including a 3N1 adaptable model that fits 1-1/2", 2" and 3" pipes, and the base self-adjusts to roof pitches from 3/12 to 12/12. The specification sheet warns that petroleum-based mastics, sealing compounds, or paints degrade the flashing and void the warranty, and IPS warrants the system for the life of the existing shingles. Originally an independent brand, Perma-Boot has been manufactured by IPS Corporation's Water-Tite division since its 2025 acquisition from Manning Building Products LLC.
- Product
Petersen PAC-CLAD PAC-150
Petersen's thin-rib semi-structural standing seam roof panel with a 1.5-inch leg height, mechanically field-seamed to either a 90-degree single lock or a 180-degree double lock. Available in widths from 12 to 20 inches in 24 gauge steel and .032 aluminum for slopes as low as 1:12, with a 35-year non-prorated finish warranty.
- Product
Petersen PAC-CLAD PAC T-250
Petersen's tall-rib mechanically field-seamed standing seam roof panel with a 2-5/8-inch nominal finished panel height, produced in 22 and 24 gauge steel or .032 and .040 aluminum with Galvalume Plus also available. Intended for architectural and structural roofing over plywood, nailboard insulation, metal decking, purlins or rigid insulation on slopes as low as 1/2:12, with factory panel lengths up to 54 feet and a 35-year non-prorated finish warranty.
- Product
Petersen PAC-CLAD Snap-Clad
Petersen's architectural snap-together standing seam metal roof panel, offered in .032 and .040 aluminum and 22/24 gauge steel with a 1-3/4-inch seam. Tested to ASTM E1592 and UL 580 Class 90 wind uplift and finished in a Kynar 500 PVDF coating backed by a 30-year finish warranty.
- Product
Petersen PAC-CLAD Tite-Loc
Petersen's mechanically field-seamed standing seam roof panel with a 2-inch leg height, offered in 12, 16 and 18-inch widths in 22 and 24 gauge steel or .032 and .040 aluminum. Designed for architectural and structural roofing over plywood, insulation, metal decking or purlins on slopes as low as 1/2:12, with a concealed-fastener floating clip system for thermal movement and factory panel lengths up to 64 feet. Finished in Kynar-based 70% PVDF coatings with a 35-year non-prorated finish warranty.
- Product
Petersen PAC-CLAD Tite-Loc Plus
Petersen's mechanically seamed structural standing seam roof panel with a 2-inch leg height field-seamed to a 180-degree double lock. Offered in 12-, 16- and 18-inch widths in 22/24 gauge steel and .032/.040 aluminum, rated for slopes as low as 1/2:12 and backed by a 35-year non-prorated finish warranty.
- Product
Polyglass Elastoflex SA V
Polyglass's premium self-adhered SBS-modified bitumen base ply for low-slope roofing, manufactured with patented ADESO Dual-Compound Self-Adhered Technology: a true Styrene-Butadiene-Styrene (SBS) modified asphalt compound on the top layer and an aggressive self-adhesive compound on the bottom. Built on a high-performance reinforced fiberglass mat and finished with sand or polyolefin film with laylines on the top surface and a split release film on the bottom.
- Product
Polyglass Modibond G FR
Polyglass's APP (Atactic Polypropylene, plastomeric) granulated cap sheet with fire-retardant additives for low-slope roofing, designed for heat-welded application as the outermost weathering layer of a multi-ply roof system over a compatible base or interply sheet (may also be applied directly to non-combustible substrates). Incorporates a high-quality polyester mat for tear strength and puncture resistance, with a granulated top surface and a factory-applied burn-off film on the bottom. No UL 790/ASTM E108 roof covering class is stated on the product page or data sheet despite the "FR" fire-retardant naming; fire classification is assembly-dependent.
- Product
Polyglass Polyflex 5.0
Polyglass's APP (Atactic Polypropylene, plastomeric) modified bitumen roofing membrane reinforced with a non-woven polyester mat, designed for use as a heat-welded base, interply or cap sheet in multilayer low-slope assemblies. The top surface is smooth sand-finished with a factory-applied burn-off film on the bottom; successive layers can be heat-welded with an additional ply of Polyflex 5.0 or Polyflex G cap sheets. Polyflex 5.0 requires a compatible granulated cap sheet or approved roof coating to complete the roofing system. No UL 790/ASTM E108 roof covering class is stated on the product page or data sheet; fire classification is assembly-dependent.
- Product
Polyglass Polyflex SA P
Polyglass's self-adhered APP (plastomeric) granulated cap sheet for low-slope roofing, manufactured with ADESO Self-Adhered Dual-Compound Technology: a true Atactic Polypropylene (APP) modified asphalt compound on the top layer and an aggressive, proprietary self-adhesive compound on the bottom. Reinforced with a tough non-woven polyester mat for tear and puncture resistance, and featuring SEALLap ULTRA self-adhesive side laps and FASTLap granule-free end laps.
- Product
Polyglass Polyfresko G HP FR
Polyglass's highly reflective white APP (Atactic Polypropylene) granulated cap sheet (Type II) with fire-retardant additives for low-slope roofing, built with a high-performance non-woven polyester reinforcement for flexibility, dimensional stability, and tear/puncture resistance, and a burn-off film bottom surface for heat welding. Featuring Polyglass's CURE Technology reflective granule surface, it is rated for a Solar Reflectance Index of 96 initial / 82 aged, meets or exceeds most cool-roofing standards, and can be used to comply with 2016 California Title 24 Part 6 cool-roof requirements as part of a Polyglass warranted multi-ply system combined with Polyflex or other approved Polyglass base sheets. No UL 790/ASTM E108 roof covering class is stated on the product page or data sheet despite the "FR" fire-retardant naming; fire classification is assembly-dependent.
- Product
Sarnafil Décor Roof System
The Sarnafil Décor Roof System pairs the Sarnafil G 410 PVC membrane (fiberglass reinforced, felt-backed, hot-air welded) with the Sarnafil Décor Profile, a PVC-extruded rib accessory heat-welded to the membrane surface in 10-foot sections to emulate the appearance of a standing-seam metal roof. It is also offered with a self-adhered peel-and-stick base membrane (Sarnafil SA Feltback), and the Décor Profile is available in seven standard colors plus custom color matching.
- Product
Sarnafil G 410
Sarnafil G 410 is a PVC thermoplastic roof membrane produced with an integral fiberglass mat reinforcement and a factory-applied lacquer coating on the top surface to reduce dirt pick-up, with hot-air welded seams. It is installed in adhered applications over approved substrates on new roofs, reroofs, recovers, and flashings, and ships in 48, 60, 72, and 80 mil thicknesses, including a self-adhered (SA) version and reflective EnergySmart colors.
- Product
Sarnafil S 327
Sarnafil S 327 is a PVC thermoplastic roof membrane produced with an integral polyester scrim reinforcement and a factory-applied lacquer coating on the top surface to reduce dirt pick-up, with hot-air welded seams. It is used in mechanically attached applications with various fastening methods and can also be adhered to approved substrates, and ships in 48, 60, 72, and 80 mil thicknesses, including reflective EnergySmart colors. The 80 mil EnergySmart White color reaches a Solar Reflectance Index of 105 initially (93 after 3 years, per ASTM E1980).
- Product
Sikaplan Fastened
Sikaplan Fastened is a PVC thermoplastic roof membrane produced with a polyester scrim reinforcement and a factory-applied lacquer coating on the top surface, with hot-air welded seams. It is secured to the deck with an in-seam mechanical attachment (disc or batten double-weld systems), is also compatible with RhinoBond induction-weld and adhered applications, and ships in a 60 mil thickness with a Pro-Weld visual weld-temperature indicator on the white color.
- Product
ALSAN RS 230 FIELD
ALSAN RS 230 FIELD is SOPREMA's high-performance, rapid-setting polymethyl methacrylate (PMMA) liquid resin, combined with ALSAN RS Fleece polyester reinforcement to form a monolithic, self-flashing, and self-adhering waterproofing membrane with no seams or mechanical fasteners. Roller- or brush-applied after catalyzing, it is offered in summer and winter formulations in Pebble Gray or Traffic White, cures fully in 3-6 hours (summer formulation) or 5 hours (winter formulation) at 68°F, and is UV stable, high-solids, and VOC-compliant (<5 g/L per EPA Method 24). Per the product data sheet, total applied thickness ranges 98-140 mils depending on substrate profile (106 mils typical on CSP 3-4/sanded base sheet), with peak load of 55-60 lbf/in and 55-85% elongation at 73.4°F per ASTM D5147. It carries a Miami-Dade NOA, Florida Building Code approval, UL and FM Approvals, and is CRRC Rated (SRI 109 initial / 88 three-year).
- Product
ELASTOPHENE Flam
SOPREMA's SBS-modified bitumen base ply for multi-ply built-up roof assemblies, reinforced with a glass fiber mat and surfaced on both sides with a polyolefin film for heat-welded or mini-mopped installation. Manufactured to ASTM D6163 Type I Grade S. SOPREMA also offers self-adhered (ELASTOPHENE FLAM STICK) and high-strength (ELASTOPHENE FLAM HS) variants of this base-ply line.
- Product
SENTINEL P150
SOPREMA's bare-backed PVC roof membrane reinforced with a weft-inserted polyester fabric encapsulated on both sides with a thermoplastic PVC formulation, for mechanically attached or fully-adhered installation on steep- and low-slope roofs with heat-weldable seams. Manufactured to ASTM D4434 Type III and available in white, gray, and tan. SOPREMA also offers a fleece-backed version (SENTINEL P150 HFB) of this membrane for adhered or ballasted assemblies.
- Product
SOPRALENE 250 FR+ GR
SOPREMA's fire-retardant SBS-modified bitumen cap ply for use in approved multi-ply membrane and flashing assemblies, composed of an elastomeric styrene-butadiene-styrene polymer blend reinforced with a non-woven polyester mat. The top surface is finished with ceramic-coated granules and the underside with fine mineral aggregate. Manufactured to ASTM D6164 Type II Grade G, with UL and FM approvals, Miami-Dade County approval, and a CRRC rating listed by SOPREMA.
- Product
SOPRALENE Flam 180
SOPREMA's SBS-modified bitumen base and flashing ply for multi-ply roof membrane assemblies, reinforced with a dimensionally stable non-woven polyester fabric and finished on both sides with a polyolefin burn-away film for heat-welded installation. Manufactured to ASTM D6164 Type I Grade S, it ships in 39.4-inch by 32.8-foot rolls at a typical thickness of 118 mils (110 mils minimum), with FM Approval, UL classification, and Miami-Dade County and Florida Building Code approvals.
- Product
TAMKO Elite Glass-Seal
TAMKO's self-sealing traditional 3-tab fiberglass asphalt shingle, made from a fiberglass mat coated on both sides with weathering-grade asphalt and surfaced with ceramic granules. Positioned as an affordable, classic three-tab option. Shingle size 12 1/4 in x 36 in with a 5 1/8 in exposure.
- Product
TAMKO HailGuard
TAMKO's newest impact-protection laminated shingle, marketed as the first and only asphalt shingle system backed by a hail warranty. Built with ImpactCore technology using advanced polymers and reinforced construction engineered to absorb and disperse hail impact energy, and tested beyond standard UL 2218 Class 4 requirements. Supports a 160 mph limited wind warranty when installed with TAMKO starter and hip-and-ridge components, carries an extended hail warranty of up to 20 years, and can be installed in temperatures as low as 25 F as part of the TAMKO Complete roofing system.
- Product
TAMKO Heritage
TAMKO's flagship laminated architectural shingle with a random-cut sawtooth design and Titan Seal self-sealing adhesive.
- Product
TAMKO No. 30 UL
TAMKO No. 30 UL is a non-perforated organic felt saturated with asphalt, accepted for use as an underlayment felt applied over the roof deck prior to installation of TAMKO asphalt shingles. Each roll covers 216 square feet (72' x 36") with laying lines at 2", 12", and 17".
- Product
TAMKO StormFighter FLEX
TAMKO's polymer-modified impact-rated laminated shingle. Double-layer laminated fiberglass mat construction with premium asphalt modified by ForceFX polymer technology, the Rapid Fire Zone expanded nailing zone, and the AnchorLock reinforced nail line that supports a 160 mph WindGUARD High Wind Limited Warranty. Offered in Class 3 (FLEX 3) and Class 4 (FLEX 4) UL 2218 impact ratings, and installable at temperatures down to 25 F.
- Product
TAMKO Titan XT
TAMKO's high-wind architectural shingle featuring TriShield technology and a reinforced AnchorLock nailing area, backed by an industry-first 160 mph wind warranty and a UL 2218 Class 3 impact classification.
- Product
Unified Steel Barrel-Vault Tile
Stone-coated steel roofing panel with a high barrel tile design in the style of Spanish tile, offered in colors including Spanish Red, Sunset Gold and Dover. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line, which is Class 4 impact rated, resistant to fire, wind and hail, lightweight, made in the USA and backed by a 50-year limited transferable warranty.
- Product
Unified Steel Cottage Shingle
Stone-coated steel roofing panel with a unique offset, multi-grooved, deep weather side-lap that creates a classic cottage shingle look. Manufactured from Galvalume steel coated with stone granules applied with acrylic polymer adhesives, it is lightweight at about 1.5 pounds per square foot, meets fire, hail (Class 4, FM Very Severe Hail) and wind (up to 180 mph) resistance standards, and is 100% recyclable. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line.
- Product
Unified Steel Granite-Ridge Shingle
Stone-coated steel roofing panel with a sleek, low-profile shingle appearance and high wind resistance. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line, which is Class 4 impact rated, resistant to fire, wind and hail, lightweight, made in the USA and backed by a 50-year limited transferable warranty.
- Product
Unified Steel Pacific Tile
Stone-coated steel roofing panel that combines a classic Mediterranean tile style with high wind and hail impact resistance. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line, which meets fire, hail (Class 4, FM Very Severe Hail) and wind (up to 180 mph) resistance standards, is lightweight, made in the USA and backed by a 50-year limited transferable warranty.
- Product
Unified Steel Pine-Crest Shake
Stone-coated steel roofing panel engineered to replicate hand-split wood shake with the durability of steel. Class 4 hail impact resistant, meets the FM standard for Very Severe Hail (VSH), Class A fire rated, hurricane wind performance rated, lightweight, and 100% recyclable. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line.
- Product
Versico VersiFleece TPO
Versico's fleece-backed TPO membrane, pairing the VersiWeld reinforced TPO sheet with a non-woven polyester fleece backing for added puncture and tear resistance, durability, and quiet, low-odor installation suited to re-roofing occupied buildings. The VersiFleece family page states the fleece-reinforced membranes are Cool Roof Rating Council certified, offer up to 75% fewer seams than modified bitumen systems, and carry "industry-leading wind performance with uplift pressures from 90-945 psf" across the family's tested assemblies. VersiFleece TPO is available in three standard and five specialty colors. Sheet thicknesses and per-SKU test listings are published in Versico's technical data bulletins rather than on the product page and are not repeated here.
- Product
Versico VersiFlex PVC
Versico's advanced-formula, heat-weldable PVC thermoplastic single-ply membrane for commercial low-slope roofs. Designed for long-term performance and highly resistant to fire and chemicals including acids, bases, restaurant oils and grease.
- Product
Versico VersiGard EPDM
Versico's EPDM single-ply rubber membrane for commercial low-slope roofs, offered in non-reinforced (45, 60, 90 mil) and reinforced (45, 60, 75 mil) constructions, with premium 90 mil membranes eligible for warranties up to 40 years.
- Product
Versico VersiWeld TPO
Versico's thermoplastic polyolefin single-ply membrane for commercial low-slope roofs, heat-welded at the seams and available in reflective white for cool-roof performance.