Products / Roof Top Blox

A rooftop support block for gas, condensate and refrigeration lines, conduit, ductwork, walkways and mechanical equipment on flat commercial roofs, sold by IPS Corporation's roofing business and designed to support loads without penetrating the roof membrane. The specification page gives a black UV-stabilized polypropylene copolymer body with a 0.100 to 0.135 in. wall on a 1 in. thick, 25 psi Type 4 closed-cell foam base, a size of 8-7/8 in. square by 4-1/2 in. high at about 1 lb, a maximum load of 250 lb single point or 350 lb dual point or strut-mounted, spacing about every 7 ft along piping, and a rating for temperatures up to 200 F. The system's accessories include a 1-1/2 in. height extender (XTB-02), 12 in. threaded extension rods (ROD-03), 10 in. galvanized slotted strut (STR-04), aluminum pipe rollers (ROL-05, ROL-06, ROL-08), polycarbonate securing brackets (SCB-07) and M-1 structural adhesive (ADH-12), with a primer required for TPO. The page states a twenty-year replacement warranty against manufacturer's defects.