Products / EyeBrow Vent

The EyeBrow Vent is DCI Products' low-profile, multi-purpose roof vent that is nailed to the deck and shingled over, for use as an intake or exhaust vent, at valleys, skylights and chimneys, or as a terminating vent for bath, kitchen and make-up air ducts up to 6 in. in diameter with a separately sold duct collar; DCI states it is not for dryer exhaust. Each piece is 57 in. long and 10.5 in. wide with a 3/4 in. lifted edge carrying a weather guard and tapering to 1/8 in. on the upslope side. DCI prints a net free area of over 21 square inches per vent and a lift-edge opening of 27 square inches, for roofs of 3/12 pitch and above, installed at least 3 feet up from the eave edge.