Products / RAH Roller Pipe Supports

The RAH series are roller-bearing rooftop pipe supports for gas pipes, electrical conduit, solar piping and other mechanical piping, sized by pipe diameter and height from the 2-RAH-5 to the 10-RAH-18 (plus the CAH-8 condensate support). Pipes rest on a self-lubricating polycarbonate roller on a stainless steel axle so the support absorbs thermal expansion and contraction without damaging the roof membrane, on a polycarbonate base. The 6-RAH-12 is designed for a 6 inch pipe, takes a maximum pipe OD with insulation of 8-1/2 inches on a 16 x 18 inch deck, adjusts from 4-3/8 to 12 inches of clearance, weighs 8.55 lbs, and its spec sheet gives a maximum load of 578 lbs (3.0 psi) with spacing not to exceed 10 foot centers depending on the load.