Products / DELTA-TERRAXX

DELTA-TERRAXX

DELTA-TERRAXX is a three-dimensional drainage composite made of a dimpled high-density polyethylene (HDPE) drainage core with a gray polypropylene geotextile heat-bonded to the dimples. Dörken lists it for flat roof decks, PRMA roof systems, green roofs and paved or ballasted roofs, where it is laid over the roof membrane as a drainage, filtration and protection layer, and also for podium decks, walkable paving-stone patios and below-grade walls. The technical data sheet (dated 08/21/2025) prints a dimple height of about 9 mm (2/5 inch), a compressive strength of 8,900 psf (ASTM D6364), a geocomposite flow rate of 16.6 gal/min/ft at a hydraulic gradient of 1.0 (ASTM D4716), and 2 m by 12.5 m (6 ft 7 in by 41 ft) rolls of about 40 lb. It is offered in Horizontal, Vertical and Blind Side application versions, and the data sheet limits UV exposure to 30 days.

Product line
DELTA
Standards met
  • ASTM D5199
  • ASTM D6364
  • ASTM D4632
  • ASTM D4533
  • ASTM D4833
  • ASTM D4751
  • ASTM D4491
  • ASTM D4716
Status
active

Sources