Products / Cheney Hemmed Drip Edge

Factory-formed rigid masonry drip-edge flashing used to continuously connect straight-length flashing runs by a smooth lapped edge, sized for use with Cheney's pre-formed corners and end dams. Offered in 1/4 in., 3/8 in. and 1/2 in. hem sizes on a 3 in. deep by 96 in. long piece, in 26-gauge (0.018 in.) Type 304 stainless steel standard, with Type 316 stainless available on special request and copper also offered, plus matching hemmed drip edge corner pieces in each hem size. Cheney says aluminum or galvanized versions of this flashing are "not recommended for use with galvanized or aluminum if the flashing is interacting with mortar."