Home / Class A Fire-Rated Roofing Products
Class A Fire-Rated Roofing Products
Specific roofing products rated Class A under ASTM E108 / UL 790, the highest fire-resistance classification.
2 1/2 Corrugated (American Building Components)
2 1/2 Corrugated is an exposed-fastener corrugated panel with 1/2 in. ribs on 2 5/8 in. centers across a 24 in. coverage width, for roof and wall use on residential, light commercial, agricultural and storage buildings at a 3:12 minimum slope. It is made in 29 gauge steel as standard (26 gauge optional), smooth, in Galvalume Plus or Signature 200. The data sheet calls it a wall panel in its introduction while listing roof and wall applications, and lists UL 2218 Class 4 and Florida approval FL #42379.06. Its UL 790 row refers to a separate Class A fire rating data sheet.
5V Crimp (American Building Components)
5V Crimp is an exposed-fastener roof and wall panel with 1/2 in. V ribs on 12 in. centers across a 24 in. coverage width, giving a traditional residential look, and it requires a solid roof deck with a waterproof membrane at a 3:12 minimum slope. It is made in 29 gauge steel as standard (26 gauge optional), striated or non-striated, in Galvalume Plus or Signature 200. The data sheet lists UL 2218 Class 4, UL 580 Class 90, ASTM E283 and ASTM E331 tests, Miami-Dade NOA # 22-0207.02 and Florida approvals FL# 42379.3, 42379.4 and 42382.9. The sheet's UL 790 row refers to a separate Class A fire rating data sheet; its UL 263 row ties Class A to a non-combustible substrate and gives Class C over a combustible one.
Ameri-Drain (American Building Components)
Ameri-Drain is an exposed-fastener roof and wall panel with 15/32 in. ribs on 6 in. centers across a 36 in. coverage width, for residential, light commercial, agricultural and storage buildings; as a roof it must go over a solid waterproofed deck at a 3:12 minimum slope. It is made in 29 gauge steel as standard (26 gauge optional), smooth, in Galvalume Plus or Signature 200. The data sheet lists UL 2218 Class 4, and its UL 790 row refers to a separate Class A fire rating data sheet.
LokSeam (American Building Components)
LokSeam is a snap-together, concealed-fastener standing seam roof panel in 12, 16 and 18 in. coverage widths, installed over open framing or a solid substructure with standard or UL 90 clips at a 3:12 minimum slope, and able to turn from roof to fascia with a rib cover. It is made in 24 gauge steel as standard (22 gauge in all widths and 26 gauge in the 12 in. width optional), striated or embossed striated, in Galvalume Plus or Signature 200, 300 and 300 Metallic coatings. The data sheet lists UL 2218 Class 4, UL 580 Class 90 and air and water tests under ASTM E283 and ASTM E331, with Florida approvals FL# 42380.15, 42380.16 and 42382.6. The sheet's UL 790 row refers to a separate Class A fire rating data sheet; its UL 263 row ties Class A to a non-combustible substrate and gives Class C over a combustible one.
MasterRib (American Building Components)
MasterRib is an exposed-fastener roof and wall panel with 3/4 in. ribs on 9 in. centers across a 36 in. coverage width, for agricultural, light commercial, residential and storage buildings and canopies at a 3:12 minimum slope, and is offered with a factory-applied DripStop condensation membrane. It is made in 29 gauge steel as standard (26 gauge optional), smooth or embossed, in Galvalume Plus or Signature 200. The data sheet lists UL 2218 Class 4, UL 580 Class 90 and Florida approvals FL# 42379.1, 42379.2, 42382.7 and 42382.8, and refers to a separate Class A fire rating data sheet in both its UL 790 and UL 263 rows.
Monarch Rib (American Building Components)
Monarch Rib is an exposed-fastener roof panel with 5/8 in. ribs on 9 in. spacing across a 36 in. coverage width, aimed at light commercial and agricultural buildings. It is made in 29 and 26 gauge steel in Galvalume Plus or Signature 200. The data sheet prints no minimum slope. It lists UL 2218 Class 4, and its UL 790 row refers to a separate Class A fire rating data sheet.
PBC (American Building Components)
PBC is an exposed-fastener roof and wall panel with 7/8 in. ribs on 2.67 in. centers across a 32 in. coverage width, often run horizontally on walls, at a 3:12 minimum roof slope. It is made in 26 gauge steel as standard (22, 24 and 29 gauge optional), smooth or embossed, in Galvalume Plus, Signature 200 or Signature 300. The data sheet lists UL 2218 Class 4 and Florida roof approvals FL# 42379.7, 42379.8 and 42382.10, and its UL 790 row refers to a separate Class A fire rating data sheet.
PBR (American Building Components)
PBR is a structural exposed-fastener roof and wall panel with 1 1/4 in. ribs on 12 in. centers across a 36 in. coverage width, rated for slopes down to 1/2:12. It is made in 26 gauge steel as standard (22, 24 and 29 gauge optional), smooth or embossed, in Galvalume Plus, Signature 200 or 300, or a 26 gauge galvanized acrylic-coated version for agricultural and other moisture-exposed buildings. The data sheet lists UL 2218 Class 4, UL 580 Class 90, FM 4471, ASTM E1680 and ASTM E1646 air and water tests, Miami-Dade NOA # 23-1113.05 for roofs and Florida approvals FL # 42379.5 and 42382.12. The sheet's UL 790 row refers to a separate Class A fire rating data sheet; its UL 263 row ties Class A to a non-combustible substrate and gives Class C over a combustible one.
PBU (American Building Components)
PBU is an exposed-fastener roof and wall panel with 3/4 in. ribs on 6 in. centers across a 36 in. coverage width, installable directly over purlins or joists and recommended for roof slopes of 1:12 or greater. It is made in 26 gauge steel as standard (22, 24 and 29 gauge optional), smooth or embossed, in Galvalume Plus, Signature 200 or Signature 300. The data sheet lists UL 2218 Class 4, UL 580 Class 90 (with Class 30 and Class 60 constructions), ASTM E283 and ASTM E331 tests, a UES evaluation for seismic use and Florida approval FL# 42382.13. The sheet's UL 790 row refers to a separate Class A fire rating data sheet; its UL 263 row ties Class A to a non-combustible substrate and gives Class C over a combustible one.
Perma-Clad (American Building Components)
Perma-Clad is an exposed-fastener roof and wall panel with 5/8 in. ribs on 9 in. centers across a 36 in. coverage width, for residential, light commercial, agricultural and storage buildings and canopies; as a roof it must go over a solid waterproofed deck at a 3:12 minimum slope. It is made in 29 gauge steel as standard (26 gauge optional), smooth, in Galvalume Plus or Signature 200. The data sheet lists UL 2218 Class 4 and UL 580 Class 90, and its UL 790 row refers to a separate Class A fire rating data sheet.
Slimline (American Building Components)
Slimline is a concealed-fastener roof panel with a 1 in. rib on a 16 in. coverage width for residential and light commercial roofs at a 3:12 minimum slope, specified with striations or with minor ribs and striations, and not endlapped. It is made in 29 gauge steel as standard (26 gauge optional) in Galvalume Plus or Signature 200. The data sheet lists UL 2218 Class 4, UL 580 Class 90 and ASTM E1592 uplift testing, with Florida approval FL# 42380.5. The sheet's UL 790 row refers to a separate Class A fire rating data sheet; its UL 263 row ties Class A to a non-combustible substrate and gives Class C over a combustible one.
Design Span hp (AEP Span)
Design Span hp is a performance-rated structural standing seam panel with a 1-3/4 inch rib that snaps together over a concealed clip, with no field seaming required and factory-applied sealant as standard. It comes in 12, 16, 17 and 18 inch coverages in 24 and 22 gauge Zincalume (AZ50) steel with Dura Tech 5000 or Dura Tech mx PVDF paint, striated or flat pan, in lengths of 5 ft 3 in to 45 ft, on a 2:12 minimum slope, with an optional wide batten cap and factory eave notching. The product page lists UL 2218 Class 4 hail impact among its performance certifications and cites IAPMO Evaluation Report ER-0309; the linked product sheet's testing line lists UL 580, UL 790, ASTM E1592, ASTM E1680 and ASTM E1646 and does not list UL 2218.
HR-36 (AEP Span)
HR-36 is an exposed-fastener trapezoidal roof and wall panel with 36-inch coverage and a 1-1/2 inch panel height for commercial, architectural and industrial work, including wainscoting, and it is also made in a reversed form for siding. It comes in 26 gauge Zincalume (AZ50) steel with Dura Tech nt SMP paint or 24, 22 and 20 gauge with Dura Tech 5000 or Dura Tech mx PVDF, with .032 and .040 inch aluminum on inquiry, in lengths of 6 to 50 feet on a 1:12 minimum slope. The page cites IAPMO Evaluation Report ER-0550.
Nu-Wave Corrugated (AEP Span)
Nu-Wave Corrugated is a classic exposed-fastener panel with sinusoidal 7/8-inch corrugations, giving 32-inch coverage on roofs and 34-2/3 inch coverage on walls. It comes in 26 gauge Zincalume (AZ50) steel with Dura Tech nt SMP paint or 24, 22 and 20 gauge with Dura Tech 5000 or Dura Tech mx PVDF, with .032 and .040 inch aluminum on inquiry, in lengths of 6 to 50 feet on a 3:12 minimum slope, and can be perforated, smooth curved or stucco embossed. The page cites IAPMO Evaluation Report ER-0550.
Span-Lok hp (AEP Span)
Span-Lok hp is a mechanically seamed standing seam panel with a 2-inch rib on concealed clips, in 12 or 16 inch coverage and 24 or 22 gauge Zincalume (AZ50) steel with Dura Tech 5000 or Dura Tech mx PVDF paint, plus .040 inch aluminum in the 16 inch size. It installs on slopes down to 1/4:12, comes striated, flat or with two pencil ribs in lengths of 6 to 45 feet, and can be curved or roll-formed on site for longer lengths. The product page lists UL 2218 Class 4 hail impact among its performance certifications and cites IAPMO Evaluation Report ER-0309; the linked product sheet, which covers Span-Lok hp, Curved Span-Lok and SpanSeam together, lists UL 580, UL 790, ASTM E1592, ASTM E1680 and ASTM E1646 and does not list UL 2218.
SpanSeam (AEP Span)
SpanSeam is a 16-inch-wide mechanically seamed standing seam panel with a narrow 2-inch rib and a 180 degree seam on concealed clips, in 24 or 22 gauge Zincalume (AZ50) steel with Dura Tech 5000 or Dura Tech mx PVDF paint, striated, flat or with two pencil ribs, in lengths of 6 to 45 feet on slopes down to 1/4:12. The product page lists UL 2218 Class 4 hail impact among its performance certifications and cites IAPMO Evaluation Report ER-0309; the product sheet the maker publishes for Span-Lok hp, Curved Span-Lok and SpanSeam together lists UL 580, UL 790, ASTM E1592, ASTM E1680 and ASTM E1646 and does not list UL 2218.
Polaroof AC (Andek Corporation)
Polaroof AC is a single-component, water-based acrylic elastomeric roof coating. Its data sheet lists a recommended 32 mils dry film thickness applied in two coats at about 3 gallons per 100 square feet, 24 standard colors plus custom colors, and 1, 5 and 55 gallon packaging. The data sheet prints a Class A fire rating under ASTM E-108, 750% elongation under ASTM D-412, and a ten-year material warranty. Listed substrates include wood, metal, asphalt BUR, concrete, insulation, modified bitumen, polyurethane foam, single-ply and slate or tile.
Atlas Castlebrook (Atlas Roofing Corporation)
Castlebrook is Atlas's designer architectural asphalt shingle built on its HP42 technology: a 42 in. x 14 in. shingle laid at a 6 in. exposure, 18 to 20 shingles per bundle, offered in seven colors. Its data sheet lists a lifetime limited shingle warranty and up to a 130 mph wind limited warranty, with ASTM D7158 Class H wind resistance, ASTM D3161 Class F (tested at 110 mph), ASTM D6381 uplift resistance (passed at 150 mph), and UL 790 and ASTM E108 Class A fire resistance. It is eligible for the Atlas Signature Select roofing system warranty.
Atlas Pinnacle Impact (Atlas Roofing Corporation)
Atlas's impact-resistant architectural shingle manufactured with proprietary polymer modified asphalt technology for superior hail resistance, rated UL 2218 and FM 4473 Class 4. Built on the wide-format HP42 platform (42-inch length, 6-inch exposure) with the Sweet Spot nailing area, double FASTAC sealant lines, 3M Smog-Reducing Granules, and 3M Scotchgard Protector against algae streaks. FORTIFIED Roof ready with wind coverage up to 130 mph.
Atlas Pinnacle Pristine (Atlas Roofing Corporation)
Atlas's flagship architectural shingle with Scotchgard Protector to resist blue-green algae staining and the Sweet Spot wide nailing zone.
Atlas Pro-Cut Hip & Ridge (Atlas Roofing Corporation)
Pro-Cut Hip & Ridge is Atlas's precut 12 in. x 12 in. hip and ridge shingle, laid at a 5-5/8 in. exposure with 31 linear ft. of coverage, with 3M Scotchgard Protector algae resistance and colors matched to Atlas field shingles. Its June 2026 data sheet lists ASTM D3161 Class F wind resistance (tested at 110 mph), ASTM E108 Class A fire resistance and UL 2218 Class 3 impact resistance, and states that its limited warranty matches the terms of the Atlas shingles installed on the field of the roof.
Atlas ProLam Hip & Ridge (Atlas Roofing Corporation)
ProLam Hip & Ridge is Atlas's 12 in. x 12 in. hip and ridge shingle in colors to match ProLam shingles, laid at a 5-5/8 in. exposure with 31 linear ft. of coverage and standard algae resistance. Its June 2026 data sheet lists a 130 mph wind limited warranty, ASTM D3161 Class F wind resistance, UL 790 Class A fire resistance and UL 2218 Class 3 impact resistance, and states that its limited warranty matches the terms of the Atlas shingles installed on the field of the roof.
Atlas ProLam (Atlas Roofing Corporation)
Atlas's value-priced laminated architectural shingle with oversized 42-inch HP42 wide-format dimensions, distinct shadow lines, and random cuts that create the texture of a multi-layered wood shake. Features the Sweet Spot nailing area, double FASTAC sealant line, built-in algae resistance, a UL 2218 Class 3 impact rating, and wind protection up to 130 mph.
Atlas StormMaster Hip & Ridge (Atlas Roofing Corporation)
StormMaster Hip & Ridge is Atlas's impact-resistant 12 in. x 12 in. hip and ridge shingle made with Core4 polymer-modified technology, in colors to match StormMaster shingles, laid at a 5-5/8 in. exposure with 31 linear ft. of coverage and 3M Scotchgard Protector algae resistance. Its June 2026 data sheet lists a 130 mph wind limited warranty, ASTM D3161 Class F wind resistance, UL 790 and ASTM E108 Class A fire resistance and UL 2218 Class 4 impact resistance, with an Atlas lifetime algae resistance limited warranty.
Atlas StormMaster Shake (Atlas Roofing Corporation)
Atlas's impact-resistant shake-profile shingle built with Core4 SBS-enhanced polymer technology and a dual sealant nailing area, carrying a UL 2218 Class 4 impact rating and finished with 3M Scotchgard Protector against algae streaks.
Bartile European (Bartile)
An extruded concrete double-barrel Mediterranean-style roof tile. The spec sheet prints nominal dimensions of 10 3/8 by 15 inches, about 122 pieces per square, a 12-inch exposure, a 3-inch minimum headlap and use on slopes greater than 2 inches per foot, with additional underlayment at 2 and 3 inches per foot. It prints weights of 11, 9.5 and 7.5 lbs "per sq." for its Super Duty, Standard and Ultralite weights without stating the area unit, ASTM E108 Class A fire, ASTM C67 freeze-thaw testing and "Class 3 Impact Resistance" without naming an impact test standard.
Bartile Legendary Slate (Bartile)
A large-format extruded concrete slate-look tile, 16 by 16 inches nominal at about 73 pieces per square with a 13-inch exposure (12 inches staggered) and a 3-inch minimum headlap, which Bartile says has a patented design that can be installed without battens. The home page says batten-free installation is possible on pitches 6/12 or less, while the slate page says it installs on pitches as shallow as 6/12. The spec sheet prints weights of 11.5, 10.4 and 8.9 lbs "per sq." for its Super Duty, Standard and Ultralite weights without stating the area unit, ASTM E108 Class A fire, ASTM C67 freeze-thaw testing and "Class 4 Impact Resistance" without naming an impact test standard. The slate page states wind resistance up to 120 mph for every Bartile slate tile.
Bartile Legendary Split Timber (Bartile)
A large-format extruded concrete shake-look tile, 16 by 16 inches nominal at about 73 pieces per square with a 13-inch exposure (12 inches staggered) and a 3-inch minimum headlap, which Bartile says installs without battens on pitches as low as 6/12. The spec sheet prints weights of 11.5, 10.4 and 8.9 lbs "per sq." for its Super Duty, Standard and Ultralite weights without stating the area unit, ASTM E108 Class A fire, ASTM C67 freeze-thaw testing and "Class 4 Impact Resistance" without naming an impact test standard.
Bartile New England Slate (Bartile)
An extruded concrete slate-look roof tile with beveled edges and a smaller format, which Bartile says re-creates hand-hewn slate and offers the only interlocking turret tile on the slate market. The spec sheet prints nominal dimensions of 10 3/8 by 15 inches, about 122 pieces per square, a 12-inch exposure (10.5 inches staggered), a 3-inch minimum headlap and use on slopes greater than 2 inches per foot, with additional underlayment at 2 and 3 inches per foot. It prints weights of 11.5, 10.25 and 8 lbs "per sq." for its Super Duty, Standard and Ultralite weights without stating the area unit, ASTM E108 Class A fire, ASTM C67 freeze-thaw testing and "Class 3 Impact Resistance" without naming an impact test standard. The slate page states wind resistance up to 120 mph for every Bartile slate tile.
Bartile Sierra Mission (Bartile)
An extruded concrete high-barrel mission-style roof tile that Bartile says creates the look of old clay tile. The spec sheet prints nominal dimensions of 10 3/8 by 15 inches, about 118 pieces per square, a 12-inch exposure (10.5 inches for Old Mission), a 3-inch minimum headlap and use on slopes greater than 2 inches per foot, with additional underlayment at 2 and 3 inches per foot. It prints weights of 11, 9.5 and 7.5 lbs "per sq." for its Super Duty, Standard and Ultralite weights without stating the area unit, ASTM E108 Class A fire, ASTM C67 freeze-thaw testing and "Class 4 Impact Resistance" without naming an impact test standard.
Bartile Split Timber (Bartile)
An extruded concrete roof tile with a rough, rustic face that Bartile says re-creates wood shake and shingles. The spec sheet prints nominal dimensions of 10 3/8 by 15 inches, about 122 pieces per square, a 12-inch exposure (10.5 inches staggered), a 3-inch minimum headlap and use on slopes greater than 2 inches per foot, with additional underlayment at 2 and 3 inches per foot. It prints weights of 11.5, 10.25 and 8 lbs "per sq." for its Super Duty, Standard and Ultralite weights without stating the area unit, ASTM E108 Class A fire, ASTM C67 freeze-thaw testing and "Class 3 Impact Resistance" without naming an impact test standard.
Bartile Yorkshire Cottage (Bartile)
An extruded concrete roof tile offered in a slate design and a split timber (shake) design, made in four widths and varied lengths and laid together with Bartile's New England Slate or Split Timber tile. The spec sheet prints handmade pieces of 17 inches long in 5, 7 and 13.5 inch widths and a 15 by 10 3/8 inch factory piece, about 122 pieces per square, a 3-inch minimum headlap and use on slopes greater than 2 inches per foot, with additional underlayment at 2 and 3 inches per foot. It prints weights of 12.75 and 11.75 lbs "per sq." for its Super Duty and Standard weights without stating the area unit, ICC 2778, ASTM E108 Class A fire, ASTM C67 freeze-thaw testing and "Class 3 Impact Resistance" without naming an impact test standard. The maker's specification section names ASTM C1492 for the tile.
Berridge Batten Seam Panel (Berridge Manufacturing Company)
The Batten Seam Panel is a roof and fascia system of Deep Vee-Panels joined by a continuous 2 inch wide, 1 3/4 inch high snap-on batten cap, for open framing or solid sheathing. The product page prints 24 gauge steel, 16 inch coverage, a smooth finish, concealed fasteners, factory lengths to 40 feet or site forming on the Berridge BP-21 roll former, batten clips at about 20 inches on center (about 50 per square), and a batten seam inner rib with expansion clip for panels over 30 feet. The data sheet's certification chart lists UL 790 Class A, UL 263 fire-resistance designs, UL 2218 Class 4 and UL 580 Class 90, noting the inner rib is required for UL 90 certification.
Berridge Bermuda Panel (Berridge Manufacturing Company)
The Bermuda Panel is a horizontal, stepped metal roof and fascia panel that reproduces the look of a traditional Bermuda roof, with concealed fasteners and a 1 inch seam, for roofs, fascia, mansards and siding over solid sheathing. The product page prints 24 gauge steel, 11 inch coverage, smooth or optional wood grain finishes, an optional vinyl weatherseal, factory lengths to 30 feet or site forming on the Berridge BP-14 roll former, splice plates for runs over 30 feet, and anchor clips at about 20 inches on center (about 90 per square). The data sheet's certification chart lists UL 790 Class A, UL 2218 Class 4, Florida approval FL 11422.1 (plywood and wood plank) and UL 580 Class 90.
Berridge Cee-Lock (Berridge Manufacturing Company)
Berridge's 1-1/2-inch snap-lock standing seam roof panel for installation over solid sheathing, with concealed fasteners and 16-1/2-inch or 11-1/2-inch panel widths. Produced in 24 and 22 gauge steel and .032 aluminum, tested to ASTM E1592 wind resistance and UL 790 Class A fire resistance, and offered in more than 30 standard, metallic, premium and wood-grain colors.
Berridge Double-Rib Panel (Berridge Manufacturing Company)
Berridge's exposed-fastener roof panel giving 24 inches of coverage with a double-rib seam overlap, made in 24 gauge steel in continuous lengths to 40 feet and installed vertically over solid sheathing. The maker lists it for roof use on residential and utility buildings. Its data sheet lists a UL 790 Class A and UL 2218 Class 4 rating, UL 580 Uplift Class 90 (Construction No. 453, plywood) and Florida Product Approval FL 11422.3 (wood deck).
Berridge S-Tile (Berridge Manufacturing Company)
S-Tile is an exposed-fastener metal roof panel formed to simulate S-profile clay tile, with 14 inch step lengths and 1 1/2 inch tall tiles, installed over solid sheathing. The product page prints 24 gauge steel, 32 11/16 inch coverage, a smooth finish, factory lengths to 40 feet and about 60 fasteners per square, with individual Spanish tiles for hips and ridges and foam closures, eave and gable drip flashing and mastic sealant tape at laps. The data sheet's certification chart lists UL 580/UL 1897, ASTM E-1592, UL 790 Class A, UL 2218 Class 4, Florida approvals FL 11241.5 and FL 11422.7, Miami-Dade NOA 16-1116.12 and a Texas Department of Insurance listing.
Berridge Spanish Tile (Berridge Manufacturing Company)
Spanish Tile is a metal roof of individual factory-formed barrel tiles, 8 inches wide by 16 inches long and 2 inches tall, installed over Berridge Deep Vee-Panels on open framing or solid sheathing with concealed fasteners. The product page prints 24 gauge steel, a smooth finish, an optional custom mixed color palette, Deep Vee-Panels to 40 feet or site-formed on the Berridge SP-14 roll former, 100 tiles per square and about 180 fasteners per square. The data sheet's certification chart lists UL 580/UL 1897, UL 790 Class A, UL 2218 Class 4, Florida approval FL 11422.6 (wood deck) and a Texas Department of Insurance listing to UL 580 and ASTM E-1592.
Berridge Tee-Lock Panel (Berridge Manufacturing Company)
Tee-Lock is a standing seam roof panel with a 2 3/8 inch mechanically seamed sidelap and a separate Tee-Lock seam cap, seamed in the field with the Tee-Lock Panel Seamer, for open framing or solid sheathing. The product page prints 18 inch coverage, 24 and 22 gauge steel and .032 and .040 inch aluminum, striated or smooth pans, concealed fasteners, an optional extruded vinyl weatherseal, factory lengths to 40 feet or site forming on the Berridge TP-24 roll former, stainless steel clips with aluminum panels and a continuous tee-rib clip for high uplift on open framing. The data sheet's certification chart lists UL 790 Class A, UL 2218 Class 4, ASTM E-1592, ASTM E-1646 and ASTM E-331, ASTM E-1680 and ASTM E-283, UL 580 Class 90 (constructions 268, 268A and 268B), FM 4471 Class 1 approvals (steel only), Texas Department of Insurance listings RC-502 to RC-504 and RC-562, Florida approvals FL 20321.1 to 20321.3 and FL 24225.1, and ICC-ES report ESR-3486.
Berridge Zee-Lock (Berridge Manufacturing Company)
Berridge's 2-inch mechanically seamed standing seam panel with 16-inch coverage and concealed fasteners, field-seamed in a single pass with the Berridge Zee-Lock Seamer. Produced in 24 and 22 gauge steel and .032/.040 aluminum, tested to ASTM E1592 wind resistance, UL 790 Class A fire resistance and UL 2218 impact resistance, in smooth or striated finishes.
Carlisle Sure-Flex PVC (Carlisle SynTec Systems)
Carlisle SynTec's reinforced, heat-weldable PVC single-ply membrane for commercial low-slope roofs, offered in reinforced and fleece-back constructions. Classified Type III/IV per ASTM D4434 and available with total system warranties up to 30 years.
Carlisle Sure-Weld TPO (Carlisle SynTec Systems)
Carlisle SynTec's thermoplastic polyolefin single-ply membrane for commercial low-slope roofs, heat-welded at the seams and available in reflective white for cool-roof performance.
CeDUR Synthetic Cedar Shakes (CeDUR)
CeDUR's lightweight synthetic cedar shakes made with polyurethane-based technology and molded from over 50 unique natural cedar molds, offered in Live Oak, Shiloh, Golden Cedar (Title 24 compliant), and Walden colors. Class 4 impact rated and standalone Class A fire rated, manufactured in the United States, and backed by a 50-year limited warranty.
CertainTeed Belmont (CertainTeed)
CertainTeed's luxury asphalt shingle that replicates the color and dimension of natural slate, rated UL 2218 Class 4 for impact resistance and equipped with StreakFighter algae resistance. CertainTeed's Belmont technical data sheet lists "ASTM E108 Class A Fire Resistance" and "UL 790 Class A Fire Resistance (at time of manufacture)".
CertainTeed Carriage House (CertainTeed)
Super-heavyweight luxury asphalt shingle with cut-away corners and wide, dark shadow lines that create the look of scalloped-edge natural slate. Rated UL 2218 Class 4 for impact resistance with StreakFighter algae resistance.
CertainTeed Cedar Crest (CertainTeed)
Cedar Crest is CertainTeed's multi-layer, medium-profile hip and ridge accessory shingle styled after cedar shake, 12 in. x 36 in. and perforated into three 12 in. caps at an 8 in. exposure (20 lin. ft. per bundle), in algae-resistant colors that blend with Landmark and Presidential shingles. CertainTeed's own documents disagree on its impact rating: the product page calls it a UL 2218 Class 4 impact-resistant shingle, while the technical data sheet linked from that page covers Cedar Crest and Cedar Crest IR, lists UL 2218 Impact Resistance Class 3, and marks only the IR colors as impact resistant. The page lists a lifetime limited warranty, 25-year algae resistance and a 15-year 110 MPH wind warranty; the data sheet notes that hand sealing is required for 110 mph wind resistance.
CertainTeed Grand Manor (CertainTeed)
CertainTeed's luxury asphalt shingle, built with two laminated layers on a heavy base to mimic the dimensional look of natural slate. One of the heaviest and most premium asphalt shingles available.
CertainTeed High-Performance Starter (CertainTeed)
CertainTeed's High-Performance Starter is a precut starter shingle for Belmont, Grand Manor and Highland Slate, with two parallel factory-applied self-sealing adhesive stripes for wind blow-off resistance. The product page gives a size of 13.25 in. x 39.375 in., while the technical data sheet gives overall dimensions of 10 in. x 36 in., 102 lineal ft. and about 91 lb per bundle. The page describes its limited warranty as concurrent with the field shingle's; the data sheet describes a limited transferable warranty against manufacturing defects.
CertainTeed Highland Slate (CertainTeed)
Premium single-layer asphalt shingle engineered to mimic the texture and depth of natural slate, built on a fiberglass mat with ceramic-coated mineral granules. Rated UL 2218 Class 3 for impact resistance with StreakFighter algae resistance.
CertainTeed Landmark ClimateFlex (CertainTeed)
Polymer-modified (rubberized) asphalt laminated shingle in the Landmark series with a UL 2218 Class 4 impact-resistance rating. ClimateFlex technology adds enhanced hail resistance, superior granule adhesion, and cold-weather pliability for low-temperature installation, plus StreakFighter algae resistance and the NailTrak nailing area.
CertainTeed Landmark Premium (CertainTeed)
Premium multi-layer laminated shingle in the Landmark series with a UL 2218 Class 4 impact-resistance rating, UL Class A fire resistance, StreakFighter algae resistance, and the NailTrak extra-wide nailing area. Carries a 15-year 110 mph wind-resistance warranty, upgradable to 160 mph with CertainTeed starter and hip-and-ridge accessories.
CertainTeed Landmark PRO Solaris (CertainTeed)
Solar-reflective architectural asphalt shingle built on CertainTeed's heavier Landmark PRO base (distinct from the standard-weight Landmark Solaris), featuring Solaris Cool Roof Technology to reduce heat absorption. CertainTeed's own product page states "UL Class A fire resistance" and "UL 2218 Class 3 impact resistance" (the page does not spell out "UL 790" for the fire rating, but UL Class A/B/C is UL 790's own classification scale for roof coverings, so the shingle carries a Class A fire rating). All colors are CRRC rated and comply with the 2022 California Title 24 Part 6 Cool Roof Requirements; select colors also comply with Los Angeles County Title 31. Carries a lifetime limited transferable residential warranty (50-year for group-owned/commercial), 10-year SureStart protection, and a 15-year 110 mph wind-resistance warranty upgradable to 160 mph with CertainTeed starter and hip-and-ridge accessories.
CertainTeed Landmark Pro (CertainTeed)
The heavier, more color-dimensional tier of CertainTeed's Landmark laminated architectural shingle line. Carries a lifetime limited transferable warranty and a 110 mph wind warranty that upgrades to 130 mph with SureStart Plus and a complete Integrity Roof System.
CertainTeed Landmark Solaris (CertainTeed)
Solar-reflective architectural asphalt shingle in the Landmark series, featuring Solaris Cool Roof Technology to reduce heat absorption. Rated UL 2218 Class 3 for impact resistance, CRRC rated, and available in colors that comply with California cool roof requirements. CertainTeed's Landmark Solaris (Southwest) technical data sheet lists "ASTM E108 Class A Fire Resistance" and "UL 790 Class A Fire Resistance".
CertainTeed Landmark TL Solaris (CertainTeed)
Landmark TL Solaris is CertainTeed's three-layer laminated, wood-shake-styled shingle with ceramic-coated, high-solar-reflectance granules, rated by the Cool Roof Rating Council and marketed for California Title 24 Part 6 and Los Angeles County cool-roof compliance. The February 2025 data sheet gives a 13 1/4 in. x 40 in. shingle laid at a 5 5/8 in. exposure, 64 shingles and about 305 lb. per square, and aged SRI values of 20 to 23 across its three listed colors. It is designed for 110 mph wind with normal installation and 130 mph with special installation, lists UL 2218 Class 4 impact resistance (at time of manufacture), and carries a lifetime limited transferable warranty with 10-year SureStart protection; Mountain Ridge is the matching hip and ridge.
CertainTeed Landmark TL (CertainTeed)
Top-tier triple-laminate luxury shingle in the Landmark series. Three laminated layers of high-grade roofing asphalt create extra thickness and a deep wood-shake profile at 13 1/4" x 40" dimensions. Includes StreakFighter algae-resistance technology and CertainTeed's lifetime limited transferable warranty with SureStart protection.
CertainTeed Landmark (CertainTeed)
CertainTeed's flagship two-piece laminated architectural shingle, offering a dimensional wood-shake look and a broad color range.
CertainTeed Mountain Ridge (CertainTeed)
Mountain Ridge is CertainTeed's high-profile, multi-layer hip and ridge accessory, 12 1/4 in. x 10 in. at an 8 in. exposure and 20 lineal ft. per box, color-blended to match Landmark Series shingles and installed with four nails. Both the product page and the technical data sheet list UL 2218 Class 4 impact resistance. The page states a lifetime limited transferable warranty, a 25-year StreakFighter algae warranty and a 15-year, 110 mph wind-resistance warranty with upgrades up to 130 mph.
CertainTeed NorthGate ClimateFlex (CertainTeed)
An SBS-modified ("rubberized") asphalt architectural shingle engineered for cold-weather flexibility and hail resistance, carrying a UL 2218 Class 4 impact rating on a two-piece laminated fiberglass construction.
CertainTeed Patriot XL (CertainTeed)
Patriot XL is CertainTeed's two-piece laminated architectural shingle in a 42 in. x 14 in. format laid at a 6 in. exposure, 57 shingles and 3 bundles per square covering 98.7 sq. ft., weighing about 220 to 235 lb. per square depending on the plant. The August 2026 data sheet lists UL 2218 Class 3 impact resistance and ASTM D3161 Class F and D7158 Class H wind resistance, names Shadow Ridge XL as its hip and ridge, and gives a lifetime or 40-year transferable limited warranty depending on ownership and building type, up to 10 years of SureStart protection and a 10-year algae resistance warranty.
CertainTeed Patriot (CertainTeed)
Patriot is CertainTeed's two-layer laminated asphalt shingle with a shake-style look, a fiberglass mat base, NailTrak wider nailing area, QuadraBond four-point layer bonding and CertaSeal sealant, in a metric 13 1/4 in. x 38 3/4 in. size at a 5 5/8 in. exposure. The technical data sheet lists ASTM D3161 Class F and ASTM D7158 Class H wind, ASTM E108 and UL 790 Class A fire, and UL 2218 Class 3 impact resistance, with an approximate weight of 208 to 216 lb per square depending on manufacturing location. The product page lists a lifetime limited transferable warranty (the data sheet: lifetime or 40 years depending on ownership), 10-year StreakFighter algae resistance, 10-year SureStart protection and a 15-year, 110 mph wind warranty, upgradeable to 130 mph with specified CertainTeed starter and hip and ridge.
CertainTeed Presidential Shake IR (CertainTeed)
Impact-resistant version of CertainTeed's Presidential Shake luxury laminated shingle with a UL 2218 Class 4 impact-resistance rating. Multi-layer construction on a fiberglass base recreates the sculpted look of cedar shake, with NailTrak nailing guides, self-sealing adhesive strips, and StreakFighter algae-resistance technology backed by a 30-year algae-resistance warranty. Carries a 15-year 110 mph wind-resistance warranty, upgradable to 130 mph with CertainTeed starter and hip-and-ridge accessories, plus 10-year SureStart protection.
CertainTeed Presidential Shake TL (CertainTeed)
Luxury triple-layer laminated shingle in the Presidential series that replicates the look of cedar shakes. Features a fiberglass base with a triple-laminate design, UL 2218 Class 4 impact resistance, UL Class A fire resistance, StreakFighter algae resistance, and wind resistance up to 110 mph (upgradable to a 130 mph wind warranty with CertainTeed starter and hip-and-ridge accessories).
CertainTeed Presidential Shake (CertainTeed)
CertainTeed's luxury asphalt shingle with staggered, sculpted tabs that replicate the look of hand-split wood shake. A premium steep-slope shingle above the Landmark architectural line.
CertainTeed Presidential Solaris (CertainTeed)
Luxury solar-reflective asphalt shingle in the Presidential series, replicating the look of hand-split cedar shake while using Solaris Cool Roof technology to reflect the sun's rays and reduce heat absorption. Rated UL 2218 Class 3 for impact resistance and CRRC rated. CertainTeed's Presidential Solaris technical data sheet lists "ASTM E108 Class A Fire Resistance" and "UL 790 Class A Fire Resistance (at time of manufacture)".
CertainTeed Presidential Starter (CertainTeed)
Presidential Starter is CertainTeed's fiberglass-based starter shingle made to match Presidential Shake and Presidential TL, 13 1/4 in. x 40 in., with a self-sealing strip and StreakFighter algae resistance; a bundle weighs about 78 lb and covers 36.67 lin. ft. in the two-layer application. The product page describes a limited lifetime warranty, while the technical data sheet states the starter's limited warranty against manufacturing defects runs concurrent with the warranty of the field shingle.
CertainTeed Presidential TL Solaris (CertainTeed)
Presidential TL Solaris is a three-layer laminated shingle with sculptured tabs styled after wood shakes, made with ceramic-coated, solar-reflective granules; all colors are CRRC rated for California Title 24 Part 6 and Los Angeles County green building compliance. Its data sheet gives a 14 1/4 in. x 40 in. shingle at a 4 in. exposure, 90 shingles and about 468 lb. per square, aged SRI values of 20 to 21 for its four listed colors, and requires Presidential Starter for the two-layer starter course. It is designed for 110 mph wind with normal installation and 130 mph with special installation, lists UL 2218 Class 4 impact resistance (at time of manufacture), and carries a lifetime limited warranty, 10-year SureStart protection and a 10-year 110 mph wind warranty upgradeable to 130 mph with Presidential Starter and a CertainTeed hip and ridge.
CertainTeed Shadow Ridge ClimateFlex (CertainTeed)
Shadow Ridge ClimateFlex is a polymer-modified, algae-resistant hip and ridge accessory made as a 12 in. x 36 in. three-piece shingle that separates into 12 in. x 12 in. caps, laid at a 5 in. exposure with about 30 lin. ft. and 65 lbs. per bundle, for use with NorthGate ClimateFlex and Landmark ClimateFlex roofs. The data sheet lists UL 2218 Class 4 impact resistance and ASTM D3161 Class F wind resistance, the latter requiring a special hand-sealed application, as does its 110 mph wind resistance; its limited warranty runs concurrent with the field shingle. The sheet's second page is headed with the NorthGate ClimateFlex name.
CertainTeed Shadow Ridge XL (CertainTeed)
Shadow Ridge XL is the hip and ridge accessory for CertainTeed's Patriot XL shingles, made in a metric 13 1/4 in. x 39 3/8 in. three-piece format that separates into 13 1/4 in. x 13 1/8 in. caps at a 5 5/8 in. exposure, about 63 lbs. per bundle; the caps can be laid single, superimposed to a double layer, or folded to a triple layer. The August 2026 data sheet lists UL 2218 Class 3 impact resistance and ASTM D3161 Class F wind resistance, with a limited warranty concurrent with the field shingle.
CertainTeed Shadow Ridge (CertainTeed)
Shadow Ridge is CertainTeed's perforated hip and ridge accessory shingle, made in an English 12 in. x 36 in. format that separates into three 12 in. caps (5 in. exposure, 30 lin. ft. per bundle) and a metric 13 1/4 in. x 39 3/8 in. format that separates into four caps (5 5/8 in. exposure, 45 lin. ft. per bundle), in algae-resistant colors that complement Landmark and Landmark TL shingles. The product page lists UL 2218 Class 4 impact resistance, UL Class A fire resistance, a lifetime limited warranty, 25-year algae resistance and a 15-year 110 MPH wind warranty; the technical data sheet linked from that page lists no UL 2218 rating and states the product's limited warranty runs concurrent with the warranty of the field shingle.
CertainTeed Shangle Ridge (CertainTeed)
Shangle Ridge is CertainTeed's two-piece hip and ridge cap shingle made to match Grand Manor, Carriage House, Belmont and Highland Slate, installing at 18 in. x 12 in. with an 8 in. exposure and 10 lineal ft. per box. The product page lists UL 2218 Class 4 impact resistance, UL Class A fire resistance, a lifetime limited warranty, 25-year algae resistance and a 15-year 110 MPH wind warranty; the technical data sheet linked from that page lists no UL 2218 rating.
CertainTeed SwiftStart (CertainTeed)
SwiftStart is CertainTeed's metric starter shingle for Landmark Series and similar metric shingles, 15 1/4 in. x 38 3/4 in., perforated for separation, with CertaSeal modified-asphalt sealant; an 18-piece bundle covers about 116 lin. ft. at roughly 62 lb. CertainTeed states it meets the 2 in. minimum headlap for metric shingles and that an upgraded 130 mph wind warranty is available on Landmark Series when SwiftStart is installed along eaves and rakes. Its limited warranty runs concurrent with the warranty of the field shingle.
CertainTeed XT 25 (CertainTeed)
CertainTeed's traditional three-tab strip shingle, built on a durable fiberglass mat with a weather-resistant asphalt coating. Features a simple two-piece design and StreakFighter algae resistance.
Benchmark (Conklin)
Benchmark is a 100-percent acrylic, elastomeric, monolithic roof coating in a bright white finish, applied as a base and top coat to waterproof metal roofs, sprayed polyurethane foam, and Conklin's Fabric Reinforced System. Its specification data sheet reports a Pass to ASTM D6083-05 (the standard test method for acrylic roof coatings), a UL-790 Class A fire rating, a UL Class 4 hail rating (UL file TGFU.R8435), an FM Approvals Severe Hail 4470 listing, ICC approval as a fire retardant, and ENERGY STAR and CRRC reflectance approval.
EQUINOX Extended Season Roofing Coating (Conklin)
EQUINOX is an acrylic elastomeric roof coating formulated to extend the acrylic application season into cooler spring and fall weather, curing in the 36 to 60 degree F range, and applied as a dark base coat and a bright white top coat over metal, spray polyurethane foam, single-ply membranes and Conklin's Fabric Reinforced System. Its specification data sheet lists a UL-790 Class A fire rating and a pass under ASTM D6083-05, with 77 percent solids by weight and 66 percent by volume, 250 percent elongation and 230 psi tensile strength (ASTM D-412). The product page describes an 85 percent solar reflective top coat and 10-year non-prorated, transferable warranty programs for material only or material and labor.
PolyCon 2800 HFO (Conklin)
PolyCon 2800 HFO is Conklin's next-generation, HFO-blown, closed-cell spray polyurethane foam (SPF) roofing insulation at 2.8-pound density, applied as a monolithic, high-R-value foam blanket over an exterior roofing substrate, using a two-component Side A (ISO) and Side B (resin) system. Conklin's SPF Roof System Specification Guide reports a 2.8-3.0 lb/cu ft in-place density (ASTM D1622), 40 psi minimum compressive strength (ASTM D1621), 60 psi tensile strength (ASTM D1623), 90% minimum closed cell content (ASTM D1940), and a Class A flammability rating tested to ASTM E108 or Underwriters Laboratory 790.
PUMA XL (Conklin)
PUMA XL is Conklin's polyurethane-modified acrylic roof coating, applied as a top coat over Benchmark base coat in a two-coat waterproofing system on metal roofs, spray polyurethane foam and Conklin's Fabric Reinforced System, in a reflective bright white or eight non-reflective colors. Its specification data sheet lists a UL-790 Class A fire rating, UL Class 4 hail data under UL file TGFU.R8435, CRRC approval and a pass under ASTM D6083-05, with an initial SRI of 109, 250 percent elongation and 360 psi tensile strength (ASTM D-412) and 13.5 dry mils per coat. The product page describes a limited 20-year warranty offered upon submittal and approval of a warranty application, and links an ICC-ES evaluation report.
Rapid Roof III (Conklin)
Rapid Roof III is an elastomeric, acrylic, monolithic roof coating applied as a base and top coat to waterproof metal roofs, sprayed polyurethane foam, membrane roofs, and Conklin's Fabric Reinforced System. Its specification data sheet reports a Pass to ASTM D6083-05 (the standard test method for acrylic roof coatings), a UL-790 Class A fire rating, and U.S. Department of Energy ENERGY STAR reflectance approval.
Central-Loc (Central States Manufacturing)
Central-Loc is a standing seam panel Central States markets for commercial metal roofs and siding. It is a 24-gauge, 0.023-inch-thick panel with an 18-inch or 24-inch panel coverage width, a 3-inch rib height, and a Galvalume AZ50 substrate rated at 50,000 PSI minimum steel strength, with a Fluropon paint system and no textured color options. The product page lists a lifetime limited paint adhesion warranty, a 30-year chalk-and-fade warranty, and a 50-year Galvalume perforation warranty, and states the panel is ASTM-tested for air infiltration (ASTM E1680) and water infiltration (ASTM E1646).
Central Seam Plus (Central States Manufacturing)
Central Seam Plus is a mechanically seamed trapezoidal architectural roof panel for commercial and industrial new construction and retrofit, with factory-applied sealant, floating clips for thermal movement, factory end-lap notching, optional pre-punching with self-engaging backup plates, and end-for-end reversible panels. The product page prints a 1/4:12 minimum roof pitch, 24 gauge, 18 or 24 inch coverage, a 3 inch rib, 0.023 inch steel on Galvalume AZ50 with a Fluropon paint system in 13 colors, and optional DripX condensation control. Its testing and approvals list structural testing to ASTM E1592, air leakage to ASTM E1680, water leakage to ASTM E1646, an FM Global report PR471158, UL2218 Impact Resistance Class 4, UL580 Uplift Resistance Class 90, UL790 Fire Resistance Class A, Florida approval FL14016 and Texas Windstorm approvals RC-448 and RC-449. The warranty tab lists lifetime limited paint adhesion, 30-year chalk and fade and 50-year Galvalume perforation coverage.
Central Snap (Central States Manufacturing)
Central Snap is a non-structural, performance-rated standing seam panel Central States describes as offering an architectural look. It is a 24-gauge, 0.023-inch panel with a 16-inch or 18-inch panel coverage width and a 1-3/4-inch rib height, rolled over a Galvalume AZ50 substrate rated at 50,000 PSI minimum steel strength with a Fluropon paint system and no textured color options. The product page lists a lifetime limited paint adhesion warranty, a 30-year chalk-and-fade warranty, and a 50-year Galvalume perforation warranty, with published ASTM E1646 water-leakage and ASTM E1680 air-leakage test results.
Central Span (Central States Manufacturing)
Central Span is a mechanically seamed vertical-rib standing seam roof panel with a flat pan and mild striations, available in 90 or 180 degree seams, with factory-applied sealant and clips that allow thermal movement; Central States describes it as having one of the highest uplift ratings in the industry. The product page prints a 1/4:12 minimum roof pitch, 24 gauge, 16 inch coverage, a 2 inch rib, 0.023 inch steel on Galvalume AZ50 and a Fluropon paint system. Its approvals list UL2218 Impact Resistance Class 4, UL580 Uplift Resistance Class 90, UL790 Fire Resistance Class A, Texas Windstorm approvals RC-446 and RC-447, and Florida approvals FL14016, FL17205 and FL17566. The warranty tab lists lifetime limited paint adhesion, 30-year chalk and fade and 50-year Galvalume perforation coverage.
Horizon-Loc (Central States Manufacturing)
Horizon-Loc (H-Loc) is a hidden-fastener snap-together roof and siding panel that Central States pitches as giving the look of standing seam at lower cost, without mechanical seaming, for residential and light commercial work over solid decking with 30 pound felt or equivalent. The product page prints a 3:12 minimum roof pitch, 26 gauge (24 gauge available in Texas), 16 inch coverage and rib spacing, a 1 inch rib, 0.0185 inch steel of 50,000 psi minimum strength on painted AZ50 or AZ55 acrylic-coated Galvalume, SMP and Fluropon paint systems with textured colors, and optional DripX condensation control. Its approvals list UL2218 impact resistance testing with no class stated, UL790 Fire Resistance Class A, Florida approval FL14026 and Texas Windstorm approval RC423. The warranty tab lists lifetime limited paint adhesion, 30-year chalk and fade and 50-year Galvalume perforation coverage.
M-Loc (Central States Manufacturing)
M-Loc is a low-rib exposed-fastener panel Central States markets as an all-purpose panel for roofing and siding, offered in 26-gauge (0.0185 inch, 80,000 PSI) or 24-gauge (0.0230 inch, 50,000 PSI) steel over a Galvalume AZ50 substrate, with a 36-inch panel coverage width and a 13/16-inch rib height on 6-inch centers. SMP or Fluropon paint systems are offered with no textured color options. The product page lists a lifetime limited paint adhesion warranty, a 30-year chalk-and-fade warranty, and a 50-year Galvalume perforation warranty.
Panel-Loc Plus (Central States Manufacturing)
Panel-Loc Plus is an exposed-fastener panel Central States markets for roofing and siding applications, available in an Ultra 26-gauge (0.0185-inch) or Prime 29-gauge (0.0150-inch) steel thickness, with a 36-inch panel coverage width and 3/4-inch rib height on 9-inch centers, rolled over an 80,000-PSI-minimum Galvalume AZ50 substrate. The product page offers SMP or Fluropon paint systems with textured color options and notes Miami-Dade approval, and lists a lifetime limited paint adhesion warranty, a 30-year chalk-and-fade warranty, and a 50-year Galvalume perforation warranty, with ASTM E455 diaphragm shear testing published for both gauges.
R-Loc (Central States Manufacturing)
R-Loc is Central States' commercial exposed-fastener panel, commonly known in the industry as a PBR-panel, marketed for roofing and siding on agricultural, industrial and light-commercial buildings. It is offered in 26-gauge (0.0185 inch, 80,000 PSI) or 24-gauge (0.0230 inch, 50,000 PSI) steel over a Galvalume AZ50 substrate, with a 36-inch panel coverage width and a 1-1/4-inch rib height on 12-inch centers. The product page lists a lifetime limited paint adhesion warranty, a 30-year chalk-and-fade warranty, and a 50-year Galvalume perforation warranty, with published ASTM E1592 structural, ASTM E1646 water-leakage, and ASTM E455 diaphragm shear test reports.
DaVinci Bellaforte Slate (DaVinci Roofscapes)
DaVinci Roofscapes' synthetic composite slate tile molded from a proprietary polymer resin, roughly 75% lighter than quarried slate so it installs on standard framing. Carries a UL Class A fire rating and a UL 2218 Class 4 impact rating with a 50-year limited lifetime warranty.
DaVinci Inspire Slate (DaVinci Roofscapes)
DaVinci Roofscapes' single-width composite slate tile, molded from natural slate with fine surface texture and a deckled edge. Each tile is roughly 12" wide by 18" long and about 1/4" thick, installed at 6" to 7.5" exposure, and is far lighter than quarried slate so it fits standard framing. Carries a UL Class A fire rating and a UL 2218 Class 4 impact rating, and is offered in a wide slate color range with custom multi-color blends.
DaVinci Multi-Width Slate (DaVinci Roofscapes)
DaVinci's flagship synthetic slate tile in varied widths for an authentic quarried-slate look, molded from engineered polymer and rated UL 2218 Class 4 for impact.
DECRA Shake XD (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel that captures the rustic tones and architectural detail of hand-split wood shake. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Shake (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel that delivers the classic elegance and rich shadow lines of cedar shake with the endurance of stone-coated steel. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Shingle XD (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel with thick-cut edges that provide the dimensionality and deep shadow lines of traditional asphalt shingles, designed to last two to three times longer than asphalt. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Tile (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel that mimics the scalloped Mediterranean tile aesthetic in a lightweight steel system. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Villa Tile (Westlake Royal Roofing Solutions)
DECRA's barrel-profile stone-coated steel tile, a lightweight Mediterranean-style roof formed from 26-gauge steel with an adhered stone-granule finish. Class A fire, UL 2218 Class 4 impact, and warranted for winds up to 120 mph. A Westlake Royal Roofing Solutions brand.
1/2″ Corrugated Panel (Delta Metals)
The 1/2 inch Corrugated Panel is a low-profile exposed-fastener corrugated steel roof and wall panel with 1/2 inch ribs at 2.67 inches on center. It is offered in 26 and 24 gauge, with double-lap coverage of 34 inches in 26 gauge and 40 inches in 24 gauge, cut to lengths from 2 ft 6 in to 40 ft. The data sheet recommends 3:12 pitch and above and lists UL 790 Class A Fire Rated, UL 2218 Impact Resistant and UL 580 Class 90 uplift testing. The paint carries a Sherwin-Williams 40-year warranty.
7/8″ Corrugated Panel (Delta Metals)
The 7/8 inch Corrugated Panel is an exposed-fastener corrugated steel roof and wall panel with 7/8 inch ribs. Coverage with a two-rib overlap is 29 inches in 26 gauge and 34 inches in 24 and 22 gauge; 22 gauge is weathering steel only, and A606 weathering, cold-rolled and Bonderized steel are also offered. The data sheet recommends 3:12 pitch and above and lists UL 790 Class A Fire Rated, UL 2218 Impact Resistant and UL 580 Class 90 uplift testing. Painted panels carry a Sherwin-Williams 40-year paint warranty.
Legacy Panel (Delta Metals)
Legacy Panel is an exposed-fastener steel roof and wall panel with 36 inch coverage, 3/4 inch ribs at 12 inches on center and a siphon groove, cut to lengths from 2 ft 6 in to 40 ft. It is made in 29 gauge (0.0142 in) and 26 gauge (0.0185 in) Galvalume AZ50 steel with SMP or Kynar paint. The data sheet recommends 3:12 pitch and above and lists UL 790 Class A Fire Rated, UL 2218 Impact Resistant and UL 580 Class 90 uplift testing. The paint carries a Sherwin-Williams 40-year warranty.
Delta Max Rib (Delta Metals)
Delta Max Rib is a low-profile exposed-fastener steel roof and wall panel with 36 inch coverage and 3/4 inch ribs at 9 inches on center, used on residential, agricultural and light commercial buildings. It is made in 29 gauge (0.0142 in) and 26 gauge (0.0185 in) Galvalume AZ50 steel and cut to lengths from 2 ft 6 in to 40 ft. The data sheet recommends 3:12 pitch and above and lists UL 790 Class A Fire Rated, UL 2218 Impact Resistant and UL 580 Class 90 uplift testing. The paint carries a Sherwin-Williams 40-year warranty.
PBR Panel (Delta Metals)
PBR Panel is a commercial-grade exposed-fastener steel roof and wall panel with 36 inch coverage and 1-1/4 inch ribs at 12 inches on center that can free-span up to 5 feet between purlins. It is offered in 26 and 24 gauge and cut to lengths from 2 ft 6 in to 40 ft; the Iowa plant sells the same 36 inch, 1-1/4 inch rib profile as R-Rib. The data sheet gives 1:12 as the recommended minimum pitch, publishes load tables, and lists UL 790 Class A Fire Rated, UL 2218 Impact Resistant and UL 580 Class 90 uplift testing. The paint carries a Sherwin-Williams 40-year warranty.
Delta Screw Flange 1” (Delta Metals)
Delta Screw Flange 1 inch is a concealed-fastener standing seam steel panel with 1 inch high ribs and a screw flange, giving 16 inch coverage in 26 and 24 gauge. It is run by default as a 3-rib striated panel and can also be run as a 2-bead or flat pan, fastened with pancake-head screws placed in slotted holes. The data sheet recommends it for roofing applications at 2:12 pitch and above. Delta Metals lists UL 790 Class A fire, UL 580 Class 90 uplift and UL 2218 Class 4 impact testing, and a Sherwin-Williams 40-year paint warranty.
Delta Snap-Lock 1.5 (Delta Metals)
Delta Snap-Lock 1.5 is a concealed-fastener snap-lock standing seam steel panel with 1.5 inch ribs and 16 inch coverage, installed with clips. It is run in 26 and 24 gauge Galvalume AZ50 steel (22 gauge in weathering steel only), striated by default or as a two-bead rib or flat pan; panels over 26 feet are rolled on site. The data sheet recommends 2:12 pitch and above and lists UL 790 Class A Fire Rated, UL 2218 Impact Resistant and UL 580 Class 90 uplift testing. The paint carries a Sherwin-Williams 40-year warranty.
Vintage Rib (Delta Metals)
Vintage Rib is an exposed-fastener pin-down steel panel for residential and agricultural roofing or siding, with 36 inch coverage and ribs at 9 inches on center. It is made in 29 and 26 gauge Galvalume AZ50 steel with SMP or Kynar paint and cut to lengths from 2 ft 6 in to 40 ft. The data sheet recommends 3:12 pitch and above and lists UL 790 Class A Fire Rated, UL 2218 Impact Resistant and UL 580 Class 90 uplift testing. The paint carries a Sherwin-Williams 40-year warranty.
DMC 100NS (Drexel Metals)
The DMC 100NS is a residential standing seam roof panel with a concealed 1-inch self-locking snap-lock seam that installs without metal roof clips. Standard nominal widths are 12, 16 and 20 inches, in painted Galvalume or Drexlume (24 gauge) and painted aluminum (.032 inch), with flat, clip-relief, striation, bead, V and pencil rib options. Minimum slope is 3:12 over plywood decking with approved underlayment. The data sheet lists UL 790 Class A, UL 2218 Class 4, UL 580 Class 90, UL 1897, TAS 100, TAS 125, Florida Building Code and Miami-Dade County approval, and states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and 25 years on the Drexlume substrate.
DMC 100SS (Drexel Metals)
The DMC 100SS is a 1-inch mechanically seamed standing seam panel for light commercial and residential roofs, including bay windows, porch roofs, curved and historical applications, installed without end laps. It is offered single-lock or double-lock in standard nominal widths of 13, 17 and 21 inches, in painted Galvalume or Drexlume (22 and 24 gauge), painted aluminum (.032 and .040 inch), 16 and 20 oz copper, and .7 and .8 mm zinc. Minimum slope is 2:12 over plywood decking with approved underlayment. The data sheet states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and a 25-year warranty on the Drexlume substrate.
DMC 150NS (Drexel Metals)
The DMC 150NS is a residential standing seam roof panel with a concealed 1-1/2-inch self-locking snap-lock seam that installs without metal roof clips. Standard nominal widths are 15 and 19 inches, in painted Galvalume or Drexlume (24 gauge) and painted aluminum (.032 inch), with flat, clip-relief, striation, bead, V and pencil rib options. Minimum slope is 2:12 over plywood decking with approved underlayment. The data sheet lists UL 790 Class A, UL 2218 Class 4, UL 580 Class 90, UL 1897, TAS 100, TAS 125, Florida Building Code and Miami-Dade County approval, and states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and 25 years on the Drexlume substrate.
DMC 150SS (Drexel Metals)
The DMC 150SS is a 1-1/2 inch mechanically seamed standing seam panel, offered single-lock or double-lock, that Drexel Metals states can be curved to a wide range of radii, from barrel roofs to conical shapes, with concealed fasteners and a floating clip system. Standard nominal widths are 12, 16 and 20 inches, in painted Galvalume or Drexlume (24 gauge), .032 inch aluminum, 16 and 20 oz copper, and .7 and .8 mm zinc. Minimum slope is 1:12, over steel decking with polyiso or over plywood with the maker's MetShield underlayment. The data sheet states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and a 25-year warranty on the Drexlume substrate, and lists Miami-Dade County, Florida Building Code and Texas Department of Insurance approvals.
DMC 175S (Drexel Metals)
The DMC 175S is a 1-3/4 inch snap-lock standing seam roof system with a broad seam, concealed fasteners and a clip that allows thermal movement; it requires no mechanical seaming, and Drexel Metals states it is approved for use on Weather Tightness Warranty projects. Standard nominal widths are 12, 14, 16 and 18 inches, in painted Galvalume or Drexlume (22 and 24 gauge) and painted aluminum (.032 and .040 inch). Minimum slope is 2:12, over plywood, steel decking or polyiso with approved underlayment, or open framing. The data sheet states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and a 25-year warranty on the Drexlume substrate, and lists Miami-Dade County, Florida Building Code and Texas Department of Insurance approvals.
DMC 200S (Drexel Metals)
The DMC 200S is a 2-inch mechanically seamed structural standing seam roof system for low to steep slope commercial and industrial work, offered as a single-lock (90 degree) or double-lock (180 degree) panel and in a radius (curved) version. Standard nominal widths are 12, 14, 16 and 18 inches, in painted Galvalume or Drexlume (22 and 24 gauge), aluminum (.032 and .040 inch), 16 and 20 oz copper, and .7 and .8 mm zinc. Minimum slope is 1/2:12, over plywood, steel decking or polyiso with approved underlayment, or open framing. The data sheet states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and a 25-year warranty on the mill-finished Drexlume substrate, and lists Miami-Dade County, Florida Building Code and Texas Department of Insurance approvals.
DMC 450 (Drexel Metals)
The DMC 450 is a commercial and residential standing seam roof panel with a 1-1/2-inch snap-lock seam fastened with the DMC 450 clip, a concealed fastener system that allows thermal movement. Standard nominal widths are 12, 16 and 20 inches, in painted Galvalume or Drexlume (22 and 24 gauge) and painted aluminum (.032 and .040 inch). Minimum slope is 3:12 over plywood decking with approved underlayment. The data sheet lists UL 790 Class A, UL 2218 Class 4, UL 580 Class 90, UL 1897 and Florida Building Code approval, and states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and 25 years on the Drexlume substrate.
DMC 450SL (Drexel Metals)
The DMC 450SL is a 1-1/2 inch snap-lock standing seam roof system in which the panel and its DMC 450SL clip form a continuous interlock, with concealed fasteners and a clip that allows thermal movement. Standard nominal widths are 12, 16 and 20 inches, in painted Galvalume or Drexlume (22 and 24 gauge) and aluminum (.032 and .040 inch). Minimum slope is 3:12 over plywood decking with approved underlayment. The data sheet states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and a 25-year warranty on the Drexlume substrate.
DMC 550S (Drexel Metals)
The DMC 550S is an interlocking standing seam roof panel with an integral seam, described by Drexel Metals as quick to install and producing a weathertight seam. Standard nominal widths are 15 and 19 inches, in painted Galvalume or Drexlume (22 and 24 gauge) and aluminum (.032 and .040 inch). Minimum slope is 3:12, over plywood decking or insulated metal decking with approved underlayment. The data sheet states a 35-year non-prorated PVDF paint warranty on Galvalume and aluminum substrates and a 25-year warranty on the Drexlume substrate.
Eagle Bel Air (Eagle Roofing Products)
Eagle's most popular flat concrete roof tile, with a smooth, untextured face and clean tailored lines that suit Modern, Contemporary, Craftsman, and Transitional architecture. Part of Eagle's flat tile lineup, which is durable against snow loads, high winds, and hail, and qualifies as a Class A roof covering.
Eagle Capistrano (Eagle Roofing Products)
Eagle Roofing's Capistrano concrete roof tile, a Spanish-style S-profile barrel tile for steep-slope roofs. A Class A, non-combustible tile available in standard and lightweight versions.
Eagle Ponderosa (Eagle Roofing Products)
A concrete roof tile profile from Eagle Roofing Products, one of Eagle's interlocking tile profiles covered by ICC-ES report ESR-1900. When installed per the report the assembly achieves an ASTM E108 Class A fire rating.
Eagle Tapered Slate (Eagle Roofing Products)
Eagle's flat concrete roof tile styled after traditional slate, with a smooth texture, beveled sides and an aggressive chamfered edge treatment for authentic depth and dimension. Part of Eagle's flat tile lineup, which qualifies as a Class A roof covering and is durable against snow loads, high winds and hail. Offered in six earth-tone blends with per-color energy ratings and CRRC listings; not available in all regions.
EcoStar Concrete Flat Tile (EcoStar)
EcoStar Concrete Flat Tile is a simulated flat concrete roof tile made with up to 80% upcycled polymers, offering the sleek, modern look of real concrete at a fraction of the weight, with easier installation than natural concrete tile. The product line includes 12" wide tiles plus hip and ridge accessory tiles, 3/4" thick for an enhanced shadow line, with 10" and 9" exposure options for staggered or offset installation and a 22" tile length providing 2" headlap at 10" reveal / 4" headlap at 9" reveal. A polymer composite tile replicating a concrete flat tile profile, not actual concrete.
EcoStar Island Groove Clay (EcoStar)
EcoStar Island Groove Clay is a simulated clay roof tile made with up to 80% upcycled polymers, engineered to reproduce the rich texture and natural tone variation of handcrafted clay tile at up to 70% less weight than natural clay. The product line includes 12" wide tiles plus hip and ridge accessory tiles, 5/8" thick for an enhanced shadow line, with 10" and 9" exposure options for staggered or offset installation and a 22" tile length providing 2" headlap at 10" reveal / 4" headlap at 9" reveal. A polymer composite tile replicating a clay tile profile, not actual clay.
EcoStar Shake Tiles (EcoStar)
EcoStar's synthetic cedar shake tiles manufactured from up to 80% post-industrial recycled materials and molded from authentic cedar shakes, offered in a 3/8-inch-thick Traditional (standard shadow line) profile, a 3/4-inch-thick Niagara (enhanced shadow line) profile, and a varied shadow line Aspen Blend. UL 2218 Class 4 hail impact rated, UL 790 Class C or A fire rated, and wind rated per ASTM D3161 Class F (110 mph), with a 50-year limited material warranty (transferable labor-and-material coverage available).
EcoStar Slate Tiles (EcoStar)
EcoStar's synthetic slate tiles manufactured from upcycled materials, offered in a 1/4-inch-thick Traditional (standard shadow line) profile in multiple widths and designer shapes, and a 5/8-inch-thick Niagara (enhanced shadow line) profile in 10-, 12-, and 14-inch widths, including random-width blends. UL 2218 Class 4 hail impact rated, UL 790 Class C or A fire rated, and wind rated per ASTM D3161 Class F (110 mph), with a 50-year limited material warranty (transferable labor-and-material coverage available).
SwiftSeal SRC300 Silicone Roof Coating (Elastochem Specialty Chemicals Inc.)
SwiftSeal SRC300 is a one-component, moisture-curing silicone rubber roof coating for existing smooth BUR, granulated cap sheet, well-adhered acrylic coating, concrete, metal, sprayed polyurethane foam and single-ply membrane roofs. The technical data sheet lists 90% solids (ASTM D2369), under 50 g/L VOC, 235% elongation and 250 psi tensile strength (ASTM D412), a Class A rating under ASTM E108, and for the white colour an initial solar reflectance of 89 (ASTM C1549), thermal emittance of 90 (ASTM C1371) and an SRI of 113. It can be applied over 40 mils in a single coat, comes in white or light grey in 5 and 55 gallon containers, and Elastochem's coverage guide gives dry-mil requirements by substrate for 5, 10, 15 and 20 year terms.
Enviroshake (Enviroshake)
Enviroshake is a composite roof shake molded from 3D scans of real cedar shakes, in 6 profiles (widths of 12 inch with 4-to-8, 8-to-4, and 6-to-6 tapered layouts) and a 20-inch length, offered in Silvered Cedar, Aged Cedar, and Multi-Tone. It should not be installed over existing asphalt shingles or OSB, or on slopes under 2/12. Backed by Gold and Standard Level warranties: a limited lifetime warranty for residential installations, a 50-year warranty for commercial installations, and a 25-year warranty for Caribbean installations.
Enviroshingle (Enviroshake)
Enviroshingle is a composite roof shingle molded from 3D scans of real perfection cedar shingles, in 2 profiles, 12-inch width, and 20-inch length, offered in Aged Cedar, Silvered Cedar, and Tropical Silver. It should not be installed over existing asphalt shingles or OSB, or on slopes under 2/12. Backed by Gold and Standard Level warranties: a limited lifetime warranty for residential installations, a 50-year warranty for commercial installations, and a 25-year warranty for Caribbean installations.
Enviroslate (Enviroshake)
Enviroslate is a composite roof tile molded from 3D scans of real slate, in 2 profiles, 12-inch width, and 20-inch length, offered in Stone Grey, Charcoal Grey, Onyx Black, Plum Purple, and Sage Green. It should not be installed over existing asphalt shingles or OSB, or on slopes under 2/12. Backed by Gold and Standard Level warranties: a limited lifetime warranty for residential installations, a 50-year warranty for commercial installations, and a 25-year warranty for Caribbean installations.
Everdrain (Everlast Roofing)
Everdrain is an exposed-fastener steel roof and siding panel with a board and batten look, 38 in. wide with 36 in. of coverage, major ribs about 1/2 in. high on 6 in. centers with two minor ribs between, a deep drain channel and a wide overlap at each side lap. It is made in 28 and 26 gauge on an AZM 125 substrate with Synergy or Quartz paint for agricultural, post-frame and residential buildings. The page lists UL 2218 Class 4 and UL 790 Class A and an uplift test under UL Construction #560, and paint film-integrity warranties of 50 years (OMNI Synergy) or 40 years (Quartz).
Everloc (Everlast Roofing)
Everloc is a snap-together steel standing seam panel, 16 in. wide with a 1 in. seam, fastened through a slotted leg instead of clips, for residential roofs, mansards and fascia over a waterproof solid substrate at pitches as low as 3:12. It is made in 26 gauge Galvalume or galvanized steel with Synergy paint. The page lists UL 580 Class 90, UL 2218 Class 4 and UL 790 Class A, structural, air and water tests including ASTM E1592, ASTM E1646 and TAS100, a 40-year paint film-integrity and 30-year fade and chalk warranty.
Everseam (Everlast Roofing)
Everseam is a residential steel standing seam panel, 20 in. wide with a 1-1/2 in. integral locking seam held by concealed metal clips, installed over a waterproof solid substrate at pitches as low as 3:12, flat, striated or with minor ribs. It is made in 24 gauge Galvalume or galvanized steel with Fluropon or Illumipon finishes. The page lists UL 580 Class 90, UL 2218 Class 4 and UL 790 Class A, structural, air and water tests including ASTM E1592, ASTM E1646 and TAS100, and 35-year film-integrity and fade or chalk warranties.
Everlast II (Everlast Roofing)
Everlast II is an exposed-fastener steel roof and siding panel with a board and batten look: 38 in. wide with 36 in. of coverage, major ribs about 3/4 in. high on 9 in. centers with a stiffener, two 3/16 in. minor ribs between them and a deep anti-siphon groove at the interlocking side lap. It is made in 28 and 26 gauge (27 gauge OMNI in select markets) on an AZM 125 substrate with Synergy or Quartz paint, for residential, post-frame and agricultural buildings. The page lists UL 2218 Class 4 and UL 790 Class A and an uplift test under UL Construction #560, and paint film-integrity warranties of 50 years (OMNI Synergy) or 40 years (Quartz).
PBR (Everlast Roofing)
Everlast's PBR is an exposed-fastener structural roof, siding and liner panel for industrial, commercial and agricultural buildings, with a weather-tight side lap for roof pitches as low as 1:12. It is made unpainted in 24 and 26 gauge Galvalume Plus or painted in 26 gauge Galvalume with Synergy paint. The page lists UL 2218 Class 4 and UL 790 Class A, a 40-year paint film-integrity and 30-year fade and chalk warranty, and a 25-year performance term on acrylic-coated AZ55.
F-Wave REVIA Classic Slate (F-Wave)
F-Wave's slate-look synthetic shingle made from commercial-grade polymer, offered in three stone-inspired colors (Royal, Black, Gray). Class A fire-rated and 150-mph wind rated with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind damage, hail, algae, and color fading. F-Wave's resources page lists the REVIA line's standards passed as UL 2218 / FM 4473 Class 4 hail resistance, FM 4475 Very Severe Hail, ASTM D3161 Class F and D7158 Class H wind, and ASTM E108 / UL 790 Class A fire, under Intertek listing CCRR-0283.
F-Wave REVIA Designer Slate (F-Wave)
F-Wave's premium synthetic slate-look shingle made from commercial-grade polymer in tough single-piece construction with no granules, no asphalt, and no layers to delaminate. Offered in Estate Series and American Blends profiles. Class 4 hail rated with warranted hail coverage, Class A fire rated, and 150-mph wind rated with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind, hail, algae, and color fading.
F-Wave REVIA Hand-Split Shake (F-Wave)
F-Wave's synthetic hand-split shake shingle made from commercial-grade polymer in single-piece construction with no granules or asphalt, replicating rustic wood shake styling in colors such as Mountain Cedar and Lakeshore Gray. Carries a Class 4 hail warranty, Class A fire rating, and 150-mph wind rating with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind, hail, algae, and color fading.
F-Wave REVIA XTM (F-Wave)
REVIA XTM is F-Wave's interlocking synthetic roofing shingle, a one-piece polymer shingle with no asphalt and no granules whose integrated front edge and adjustable nail-line hooks mechanically interlock. The product page offers it in four profiles (American Blends, Classic Slate and Hand-Split Shake, with the Estate profiles listed as coming soon) and prints wind warranties of 130 mph with 1 1/4 inch smooth shank nails, 180 mph with 1 1/2 inch ring shank nails and unlimited with 1 1/2 inch raised head screws, plus Class A fire (per the installation instructions), a Class 4 hail warranty and no minimum installation temperature. The maker's flyer prints UL2218 Class 4 hail impact and describes XTM as the first FM 4475 Very Severe Hail rated shingle with warrantied coverage; the Intertek test report the maker publishes describes that test as a modified version of ANSI/FM 4473 for very severe hail. The XTM WeatherForce Advantage warranty runs 50 years for an individually owned single-family detached home (15 years non-prorated) and 40 years for other structures, with Class IV hail impact coverage of 5 years on single-family detached homes only.
1 1/4 inch Corrugated (Fabral)
The 1 1/4 inch Corrugated panel is an exposed-fastener metal panel that Fabral lists among its residential and agricultural products for post frame structures. The product page prints 24 inch coverage with a 1/4 inch rib height, a 2 1/2:12 minimum roof slope, UL2218 Class 4 hail resistance and UL790 Class A fire resistance.
2 1/2 inch Corrugated (Fabral)
The 2 1/2 inch Corrugated panel is an exposed-fastener metal panel for roof and wall applications. The product page and specification sheet print .010 galvanized G30 and 29 gauge galvanized G60 substrates, 24 inch wall coverage and 21 1/3 inch roof coverage with a 1/2 inch rib height, a 2 1/2:12 minimum roof slope and custom-cut lengths up to 40 feet. Both print UL 790 Class A fire resistance and UL 2218 Class 4 hail impact resistance, and the sheet adds a UL 580 Class 90 uplift test rating. Manufacturing is listed at Gridley IL, Lancaster PA, Marshfield WI, Salt Lake City UT, Spokane WA and St. Joseph MN.
FabRib (Fabral)
FabRib is an exposed-fastener roofing and siding panel offered in steel and aluminum. The product specification sheet prints a gravity load table for 29 and 26 gauge steel and .018 and .021 inch aluminum, a minimum recommended roof slope of 2 1/2:12, maximum panel lengths of 40 feet in steel and 17 feet in aluminum, Class 4 Impact: UL2218 and Class A Fire: UL790, and a 30-year paint-finish warranty against cracking, chipping, peeling, fading and chalking. The commercial product listing prints the same hail and fire ratings but gives a 30 foot steel maximum length where the sheet gives 40 feet; both figures are the maker's own.
Grandrib 3 (Fabral)
Grandrib 3 is an exposed-fastener metal roofing and siding panel in Fabral's Grandrib series, giving 36 inches of coverage with a 3/4 inch rib height. The residential and agricultural product listing prints a 29 gauge Galvalume AZ50 substrate with the Enduracote paint system, a 2 1/2:12 minimum roof slope and custom-cut lengths up to 40 feet, with manufacturing at Gridley IL, Jackson GA, Lancaster PA, Marshfield WI, Salt Lake City UT, Spokane WA and St. Joseph MN. The same listing prints Hail Resistance UL2218, Class 4, Fire Resistance UL790, Class A and a UL580, Class 90 wind uplift test rating. Sister profiles Grandrib 3 Plus (29 gauge G90 galvanized, WeatherXL SMP paint) and GRG (29 gauge Galvalume AZ35) are listed alongside it with their own finish warranties.
Hefti-Rib (Fabral)
Hefti-Rib is an exposed-fastener roofing and siding panel with 7.2 inch rib spacing, offered in .032, .040 and .050 inch aluminum and 18 through 26 gauge steel, with curving, mitered corner and perforation options. The specification sheet prints a 2:12 minimum roof slope, 5 foot maximum purlin spacing, panel lengths from 4 to 65 feet and a 10 foot minimum factory curving radius, and lists UL580 Class 90 wind uplift (#244), UL2218 Class 4 impact, UL790 Class A fire, and ASTM E283 and E331 test data. It states a 30-year paint-finish warranty. Fabral lists Hefti-Rib 288 (HR-288), made at Ft. Worth, TX, and Reverse Run Hefti-Rib as variations of the profile.
Horizon 16 (Fabral)
Horizon 16 is a snap-lock standing seam roof panel with stiffening ribs and a nail flange fastening system, listed for residential, post frame and light commercial projects. The product page and specification sheet print 16 inch coverage with a 1 inch seam height, 26 gauge, a 3:12 minimum roof slope, custom-cut lengths from 5 to 40 feet and the WeatherXL SMP paint system, and the sheet states the panel must be installed over solid decking. Both print UL 790 Class A fire resistance, UL 2218 Class 4 hail impact resistance and a UL 580 Class 90 uplift test rating. The sheet's Galvalume (AZ50) warranty table reads film integrity lifetime, chalk and fade 30 years and perforation 20 years. The product page names manufacturing at Spokane, WA.
Horizon S100 (Fabral)
Horizon S100 is a snap-lock standing seam panel for residential, post-frame and light commercial roofs, 16 inches wide with a 1 inch seam, a nail flange for faster installation, factory-applied sealant and standard shadow lines. The product specification sheet prints 26 gauge, a recommended pitch of 3:12 and above, custom-cut lengths from 5 to 40 feet, installation over solid decking, and the WeatherXL SMP paint system; it prints UL 790 Class A Fire Resistance Rating, UL 2218 Class 4 Hail Impact Resistance and UL 580 Class 90 Uplift Test Rating. Its Galvalume (AZ50) warranty table reads film integrity lifetime, chalk and fade 30 years and perforation 20 years. The sheet states OSB or ZIP System decking is not recommended.
IP Seam (Fabral)
IP Seam is a mechanically seamed trapezoidal standing seam panel for low-slope industrial roofs and pre-engineered metal buildings, with 24 inches of net coverage, a 3 inch high seam and factory-applied mastic in the sidelap; a snap-locked version is sold as IP Snap 3. The specification sheet prints 24 and 22 gauge Grade 50 Galvalume AZ-50 steel, a 1/2:12 minimum roof slope, panel lengths from 6 to 47 feet, Hail Resistance UL2218, Class 4, Fire Resistance UL790, Class A, wind uplift to UL90 and ASTM E1592, and Factory Mutual FM Class 1-90 Tested and Approved. Fabral provides a 30-year paint-finish warranty, weathertightness warranties of up to 20 years, and states that 35-year material and weathertightness warranties can be ordered.
IP Snap (Fabral)
IP Snap is a mechanically snapped trapezoidal standing seam roof panel for low-slope industrial applications and pre-engineered metal buildings, made at Ft. Worth, TX. The product page lists 22 and 24 gauge steel, factory- applied sealant, 24 inch coverage, a 1/2:12 minimum roof slope and panel lengths from 6 to 47 feet. It prints UL2218 Class 4 hail resistance, UL790 Class A fire resistance, UL90 wind uplift listings #534 and 535, and FM Class I-90 wind uplift.
Mighti-Rib (Fabral)
Mighti-Rib is an exposed-fastener metal panel for roof and wall applications. The product page lists a 26 gauge Galvalume AZ50 substrate, a 1:12 minimum roof slope, panel lengths from 6 to 45 feet, UL2218 Class 4 hail resistance, UL790 Class A fire resistance, a UL580 Class 1-90 wind uplift test rating (#169) and an FM Class 1-150 wind uplift listing. The specification sheet repeats the UL 790 and UL 2218 classes, names the WeatherXL SMP paint system and gives a Galvalume (AZ50) warranty table of film integrity lifetime, chalk and fade 30 years and perforation 20 years. Manufacturing is listed at Gridley IL, Lancaster PA, Marshfield WI, Salt Lake City UT and St. Joseph MN.
PowerSeam II (Fabral)
PowerSeam II is a mechanically seamed structural standing seam roof panel available single- or double-locked, factory curvable to a 10 foot minimum radius and field curvable to 200 feet. The specification sheet prints a 1:12 minimum roof slope, 5 foot maximum purlin spacing, panel lengths from 4 to 65 feet and widths of 12, 16 and 18 inches in 24 and 22 gauge steel and .040 inch aluminum. It lists air infiltration to ASTM E283 and ASTM E1680, water penetration to ASTM E331, ASTM E1646 and ASTM E2140, wind uplift to ASTM E1592 and UL580 Class 90, Class 4 Impact: UL2218 and Class A Fire: UL790, and notes that its FM approvals (1-60 to 1-180) and Florida approval apply to PowerSeam only. Fabral provides a 30-year paint-finish warranty and weathertightness warranties of up to 20 years.
PowerSeam (Fabral)
PowerSeam is a mechanically seamed structural standing seam roof panel, offered in single and double lock seaming and factory-curvable to a 10 foot minimum radius. The product details sheet prints 12, 16 and 18 inch panel widths, a 1:12 minimum roof slope, 5 foot maximum purlin spacing, panel lengths from 4 to 65 feet and tapering on request, and the product page lists lengths from 6 to 47 feet. The sheet lists UL580 Class 90 wind uplift (#90, 176, 180, 238, 548, 549), FM 1-60 through 1-180 wind uplift ratings, UL2218 Class 4 impact, UL790 Class A fire, Florida approval, and ASTM E283, E1680, E331, E1646, E2140 and E1592 test data. It also states a 30-year paint-finish warranty, with weathertightness warranties available for up to 20 years.
Prime Rib (Fabral)
Prime Rib is an exposed-fastener steel panel with a deep continuous box rib for post frame roofing and siding. The product page lists 26 and 29 gauge Galvalume AZ50 substrates, 33 inch coverage with a 1/2 inch rib height, a 2 1/2:12 minimum roof slope and custom-cut lengths up to 40 feet, with manufacturing at Gridley IL, Marshfield WI and St. Joseph MN. The product page and specification sheet print UL 790 Class A fire resistance and UL 2218 Class 4 hail impact resistance. The sheet's warranty table covers G90 galvanized and AZ50 Galvalume, each with lifetime film integrity, 30-year chalk and fade and 20-year roof perforation coverage.
ProClad (Fabral)
ProClad is an exposed-fastener steel roofing and siding panel for post- frame, agricultural and residential applications. The product page lists 26 and 29 gauge Galvalume AZ50 substrates, 36 inch coverage with a 5/8 inch rib height, a 2 1/2:12 minimum roof slope and custom-cut lengths up to 40 feet, with manufacturing at Gridley IL, Marshfield WI, Salt Lake City UT and St. Joseph MN. The product page and specification sheet print UL 790 Class A fire resistance and UL 2218 Class 4 hail impact resistance, and the sheet names the WeatherXL SMP paint system. The sheet's warranty table covers G90 galvanized and AZ50 Galvalume, each with lifetime film integrity, 30-year chalk and fade and 20-year roof perforation coverage.
R-Panel (Fabral)
R-Panel is a 26 gauge steel exposed-fastener roof and wall panel made at Fabral's Fort Worth, Texas facility for light commercial and self-storage applications. The product page lists vertical and horizontal application, mitered corners, lengths from 4 feet up to 40 feet, UL2218 Class 4 hail resistance and UL790 Class A fire resistance. Fabral also lists PBR, the same 26 gauge panel family with perforation and reverse-run options, with a recommended minimum pitch of 1:12 for PBR and 2.5:12 for PBU, and the same UL2218 Class 4 and UL790 Class A listings.
Slim Seam 150 (Fabral)
Slim Seam 150 is a concealed-clip structural standing seam roof panel with a stainless steel clip system that allows thermal movement, made at Lancaster, PA. The product page and specification sheet print 12 and 16 inch coverage with a 1 1/2 inch seam height, 24 gauge high strength Galvalume steel, a 1:12 minimum recommended pitch, custom-cut lengths up to 40 feet and open spans up to 24 inches on center, in shadow-line and flat-pan versions. The sheet prints UL 790 Class A fire resistance, UL 2218 Class 4 hail impact resistance and a UL 580 Class 90 uplift test rating, plus ASTM E283 and E331 test data, TAS 125 and Florida approval. It states a 30-year paint-finish warranty.
Slim Seam (Fabral)
Slim Seam is a snap-together structural standing seam roof panel with a one- piece stainless steel clip system that allows thermal movement, for use over open framing or solid decking. The product specification sheet prints 12 and 16 inch panel widths, a 1:12 minimum roof slope, 3 foot maximum purlin spacing, panel lengths from 4 to 48 feet and a shadow-line option, and the product page lists lengths from 6 to 47 feet. The sheet lists UL580 Class 90 wind uplift (#274, 274A, 369), UL2218 Class 4 impact, UL790 Class A fire, Texas Department of Insurance and Florida approval, and ASTM E1680, E283, E1646, E331 and E1592 test data. It states a 30-year paint-finish warranty.
1 1/2 inch SSR 150 (Fabral)
The 1 1/2 inch SSR 150 is a concealed-clip standing seam roof panel that Fabral pitches at residential and re-roofing work, with 16 inch coverage, a 1 1/2 inch seam height, factory-applied sealant and standard shadow lines. The specification sheet prints 24 gauge, a recommended pitch of 1:12 and above, custom-cut lengths from 5 to 40 feet, open spans up to 24 inches on center over purlins or furring, and UL 790 Class A Fire Resistance Rating, UL 2218 Class 4 Hail Impact Resistance and UL 580 Class 90 Uplift Test Rating. Its Galvalume (AZ50) warranty table reads film integrity lifetime, chalk and fade 30 years and perforation 20 years. The product listing names manufacturing at Gridley IL, Marshfield WI, Salt Lake City UT and St. Joseph MN; a sister 1 1/2 inch SSR profile is made at Lancaster PA.
Stand 'N Seam (Fabral)
Stand 'N Seam is a mechanically seamed structural standing seam roof system with double-locked side joints, factory-applied sealant and a one-piece stainless steel clip for controlled thermal movement; panels can be curved and field-formed so they span a roof without end laps. The commercial product listing prints .032 and .040 inch aluminum, 22 and 24 gauge steel and copper substrates, a 1/2:12 minimum roof slope, panel lengths from 6 to 47 feet, Hail Resistance UL2218, Class 4 and Fire Resistance UL790, Class A. Its brief specification sheet prints air infiltration to ASTM E1680 and ASTM E283, water penetration to ASTM E1646, ASTM E331 and ASTM E2140, wind uplift to ASTM E1592 and UL580 Class 90, field forming up to 300 feet for the 16 inch panel, and a 30-year paint-finish warranty. Fabral describes it as having the highest wind uplift resistance of any standing seam panel system.
Thin Seam (Fabral)
Thin Seam is a snap-together standing seam roof panel that needs no mechanical seaming tool and can be installed over open framing or solid substrates. The specification sheet prints 12, 16 and 18 inch widths, a 1:12 minimum roof slope, 4 foot maximum purlin spacing, panel lengths from 6 to 47 feet with field forming available, factory-applied sealant, tapering and batten seam line options, and substrates of .032 and .040 inch aluminum, 24 and 22 gauge steel and copper. It lists UL580 Class 90 wind uplift (#303, 359, 359A, 343, 417), UL2218 Class 4 hail resistance, UL790 Class A fire resistance, Florida approval, and ASTM E283, E331 and E1592 test data, and states a 30-year paint-finish warranty. The product page names manufacturing at Ft. Worth, TX and Jackson, GA.
Twin-Fold II (Fabral)
Twin-Fold II is a mechanically seamed, low-profile standing seam roof panel suited to roofs that need tapered panels, with a minimum tapered width of 1.5 inches. The specification sheet prints standard widths of 12, 16 and 18 inches in 22 and 24 gauge steel and .032 inch aluminum, painted weights from about 54 to 162 pounds per square, a 1:12 minimum pitch, 3 foot maximum purlin spacing and lengths from 6 to 47 feet, and lists wind uplift to UL580 and ASTM E1592, Class 4 Impact: UL2218 and Class A Fire: UL790. It also lists air infiltration and water penetration tests by designations printed without the ASTM letter prefix. Fabral provides a 30-year paint-finish warranty and weathertightness warranties of up to 20 years; the commercial listing notes the panel requires solid decking.
Ultra Loc (Fabral)
Ultra Loc is a concealed-fastener standing seam roof panel that Fabral lists for its Western region, made at Spokane, WA, for replacement and new construction work. The specification sheet prints 16 inch coverage with a 1 inch seam height, 26 gauge, a 3:12 and above recommended pitch, custom-cut lengths up to 40 feet and the WeatherXL SMP paint system, and the product page states it can be installed over solid decking or over an existing roof. The sheet prints UL 790 Class A fire resistance and UL 2218 Class 4 hail impact resistance. Its Galvalume (AZ50) warranty table reads film integrity lifetime, chalk and fade 30 years and perforation 20 years.
V-Beam (Fabral)
V-Beam is an exposed-fastener roofing and wall panel that can be applied in vertical and horizontal orientations, offered in .032, .040 and .050 inch aluminum and 18 through 26 gauge steel. The specification sheet prints a 2:12 minimum roof slope, 4 foot maximum purlin spacing, panel widths of 32 inches in steel and 42 2/3 inches in aluminum, and maximum lengths of 45 feet in steel and 16 feet in aluminum, with perforation on request. It lists UL2218 Class 4 impact and UL790 Class A fire and states a 30-year paint- finish warranty.
GacoBase U95 (Gaco)
GacoBase U95 is a two-component, bio-based urethane base coat for rejuvenating aged asphaltic, single-ply, and previously coated roofs and protecting foam roofs, and Gaco's product page names built-up gravel roof encapsulation as its primary use. The product data sheet states it resists oil migration on asphaltic roofs without a bleed-blocking primer, is not a finish coat, and must be top coated with GacoFlex silicone, aliphatic urethane, or acrylic coatings. It is 100% solids, supplied as U9511P Part A (gray) and U95I Part B (clear), with a theoretical coverage of 100 sq ft per gallon at 16 mils. Listed approvals are UL 790 Class A, FM Approval, and USDA BioPreferred; it is not for previously silicone-coated roofs or ponding areas.
GacoFlex S20 Series (Gaco)
GacoFlex S20 Series is a solvent-free, single-component, moisture-curing 100 percent silicone elastomeric roof coating used as a maintenance coating over existing coatings, metal, built-up roofing, cap sheets, modified bitumen and weathered single-ply membranes, and over sprayed polyurethane foam roofing, including roofs used for rainwater catchment. Its product data sheet lists UL790 Class A, CRRC 0608-0076, FM Approval, Miami-Dade product control approval, Florida product control compliance reports FL14724 and FL14723, and NSF P151 certification for rainwater catchment components, and reports its tensile and elongation results against the ASTM D6694 requirements, including 450 psi tensile strength and 174 percent elongation under ASTM D412, and an initial SRI of 111 (ASTM E1980).
GacoFlex S2100 (Gaco)
GacoFlex S2100 is a white, cleanable, solvent-free, high-solids 100% silicone roof coating formulated to resist dirt pick-up, and the product data sheet states it withstands permanent ponding water and contains 37% recycled content. It is used as a maintenance coating over existing elastomeric coatings, metal, smooth built-up roofing, mineral cap sheet, APP and SBS modified bitumen, weathered single-ply membranes, and sprayed polyurethane foam roofing. The data sheet lists UL 790 Class A and FM 4470 Class 1 approvals, with FM Severe Hail when applied over GacoFlex F2733 GacoRoofFoam, and an initial SRI of 103 (87 accelerated aged). One coat at 1.5 gal per 100 sq ft targets about 22 dry mils; the system is eligible for a 5-year Energy Star warranty when installed by a Gaco licensed applicator.
GacoFlex S42 Series (Gaco)
GacoFlex S42 Series is a high-adhesion, solvent-free, single-component, moisture-curing 100 percent silicone roof coating that the maker says needs no primer over most substrates, used as a maintenance coating over metal roofs, weathered single-ply membranes and polyurethane foam roofs, with the white S4200 also used over aged SBS, APP and built-up roofing. Its product data sheet lists UL790 Class A, CRRC 0608-0072, FM Approval, Miami-Dade product control approval and Florida Building Code compliance, and reports an initial SRI of 110 and a three-year SRI of 84 (ASTM E1980), with 298 psi tensile strength and 150 percent elongation under ASTM D2370. It warns against using colored silicone coatings over asphalt substrates.
GacoFlex U91C Series (Gaco)
GacoFlex U91C Series is a single-component, moisture-cure, aromatic polyurethane base coat that provides robust protection to sprayed polyurethane foam (SPF) roof substrates and prevents oil migration on asphalt-based roofs. The manufacturer states it is not a finish coat and should be top-coated with a GacoFlex aliphatic urethane, silicone, or acrylic coating for weatherability, UV resistance, and reflectance. Its product data sheet reports a Class A external fire exposure result to ASTM E108 (metal deck, 1:12 slope, and BUR deck, 2:12 slope).
GacoFlex U92 Series (Gaco)
GacoFlex U92 Series is a single-component, moisture-cure, VOC-compliant aliphatic urethane roof topcoat designed to add reflectivity and UV resistance over other GacoFlex urethane coatings such as the U91 aromatic base coat, and over primed aged galvanized metal. Its product data sheet lists UL790 Class A, CRRC 0608-0098 for the U9200 white only, FM Approval, Miami-Dade product control approval and Florida Building Code compliance report FL14724, and reports 627 percent initial elongation under ASTM D2370. The sheet warns against applying it to silicone roof materials.
GacoPoly U8782 Fast Set Polyurea Hybrid (Gaco)
GacoPoly U8782 (GacoFlex U8782 on its data sheet) is a low-viscosity, fast-curing, two-component, fire-retarded polyurea hybrid waterproofing elastomer, 100 percent solids with zero VOC, sprayed with plural-component airless equipment up to 64 mils in one pass. The maker recommends it as a high-build protective coating over polyurethane foam insulation and metal roofing, and publishes roof specifications for it over spray polyurethane foam and, with a silicone top coat, over asphalt. Its product data sheet lists Cool Roof Council approval, ASTM E108 Class A flammability, an initial solar reflectance index of 64.80 (49.58 aged), and 2200 psi tensile strength with 225 percent elongation under ASTM D412. It may also serve as a base coat with granules on vehicular and pedestrian decks.
GacoPoly UB64 (Gaco)
GacoPoly UB64 (GacoFlex UB64 Series on its data sheet) is a two-component, hydrolytically stable, fire-retardant polyurethane base coat for roofs, mechanical room floors, walking decks and traffic decks, over plywood, polyurethane foam, primed concrete and metal. It comes as UB6407 white, which must be top coated when exposed to weather, and UB6421 black, which may be left exposed as a top coat; either must be top coated within 72 hours. Its product data sheet states it is UL-listed as a Class A roof covering system per UL 790 / ASTM E108 and reports 2100 psi tensile strength and 400 percent elongation. An SCAQMD-compliant version is sold as GacoPoly UB64C under its own data sheet.
GacoRoof GR16 Series (Gaco)
GacoRoof GR16 Series is a single-component, 100% silicone, elastomeric, air-dry roof coating that forms a seamless membrane to seal and repair existing roofs and protect against leaks, permanent ponding water, and severe weather. It adheres to most substrates, including built-up roofs, cap sheet, metal, modified bitumen, and sprayed polyurethane foam (SPUF), without a primer in most cases, and remains permanently flexible under ponding water or snow load. The product data sheet states it meets ASTM D6694 and carries a UL 790 (ASTM E108) Class A external fire exposure rating.
GAF Camelot II (GAF)
GAF's designer asphalt shingle with an artisan-crafted slate-like shape, oversized tabs, and a custom European-inspired color palette, offered at a fraction of the cost of traditional slate. Carries a UL 2218 Class 4 impact-resistance rating and GAF Time-Release Algae-Fighting Technology.
GAF Grand Canyon (GAF)
GAF's ultra-premium designer laminated shingle with an authentic rugged wood-shake look created by oversized 17" x 40" tabs and a dimensional, sculpted profile. Features Dura Grip adhesive to seal each shingle and reduce blow-off risk, StainGuard protection against blue-green algae discoloration, and a lifetime limited transferable warranty with Smart Choice Protection coverage in the initial non-prorated period.
GAF Grand Sequoia AS (GAF)
The impact-resistant version of GAF's Grand Sequoia designer shingle, built with oversized tabs for a rugged wood-shake look and passing the UL 2218 Class 4 impact test.
GAF Grand Sequoia RS (GAF)
Cool-roof Lifetime Designer Shingle with a genuine wood-shake look, using EcoDark granules and an extra-large design with oversized tabs. Rated by the Cool Roof Rating Council, can be used to comply with California Title 24 cool roof requirements and the Los Angeles Green Building Code, and carries a UL 2218 Class 4 impact-resistance rating.
GAF Grand Sequoia (GAF)
GAF's oversized, artisan-crafted designer laminated shingle that mimics the rugged look of wood shakes. The standard (non-AS) Grand Sequoia is a lifetime shingle rated to 130 mph but is not impact-rated; the separate Grand Sequoia AS adds a UL 2218 Class 4 rating.
GAF Marquis WeatherMax (GAF)
GAF's top-of-the-line traditional 3-tab asphalt/fiberglass strip shingle, positioned above Royal Sovereign in the 3-tab range and marketed for outstanding all-weather performance. Offered in a regional color palette including Autumn Brown, Charcoal, Golden Cedar, and Weathered Gray, and backed by a 30-year limited transferable warranty with Smart Choice Protection. GAF's Canadian product page lists "Fire - UL Listed to ANSI/UL 790 Class A".
GAF Royal Sovereign (GAF)
America's best-selling 3-tab asphalt shingle, made with advanced color sequencing technology and Color Lock ceramic-fired granules for a rich, vivid design at a value price. Includes StainGuard protection against blue-green algae discoloration.
GAF Slateline (GAF)
GAF's designer asphalt shingle with bold shadow lines and tapered cut-outs that create the appearance of natural slate at a fraction of the cost. Carries a UL 2218 Class 4 impact-resistance rating and GAF Time-Release Algae-Fighting Technology.
GAF Timberline AS II (GAF)
GAF's SBS-modified, impact-resistant architectural shingle in the Timberline family, engineered with a rubberized asphalt for flexibility and passing the UL 2218 Class 4 impact test.
GAF Timberline HDZ RS (GAF)
Cool-roof version of GAF's Timberline HDZ laminated architectural shingle using EcoDark granules for deep, rich reflective colors, including the darkest highly reflective shingle color (Charcoal). CRRC rated and can be used to comply with 2025 California Title 24, Part 6 and the Los Angeles County Green Building Standards Code. Features LayerLock Technology with the StrikeZone nailing area and carries a UL 2218 Class 3 impact rating.
GAF Timberline HDZ (GAF)
GAF's flagship laminated architectural asphalt shingle, featuring the LayerLock design and a wide StrikeZone nailing area. The best-selling shingle in North America.
GAF Timberline NS (GAF)
Value-priced laminated architectural shingle in the Timberline family with a classic natural shadow effect for a subtle, even-toned architectural look. Uses Dura Grip adhesive and qualifies for GAF's Lifetime Limited Warranty; eligible for the 15-year WindProven Limited Wind Warranty when installed with LayerLock Technology and four qualifying GAF accessories.
GAF Energy Timberline Solar ES 2 (GAF)
Timberline Solar ES 2 is the GAF Energy nailable solar energy shingle that installs alongside Timberline asphalt shingles, by the same crew and tools, to form an integrated solar roof without racked panels. GAF prints a Pmax of 57 W (plus or minus 5%) per energy shingle, which it calls a 23% improvement over its first-generation solar shingle, nominal dimensions of 68 3/4 in. x 16 7/8 in. x 1 in., a weight of 10.1 lb, about 30 energy shingles (1.7 kW) per square, an allowed roof pitch of 2:12 or greater, and an average ambient temperature range of -40 to 122 F. Listed standards are UL 3741 rapid shutdown (NEC Article 690.12), UL 7103 BIPV system certification, a UL listing to ANSI/UL 790 Class A fire, ASTM D3161 Class F wind, and UL 2218 Class 4 impact resistance, the last only for shingles sold in packages bearing the Intertek-ETL Class 4 listing statement; GAF excludes hail damage, including reduced solar output, from its limited warranties. GAF says the shingle is assembled at GAF Energy's facility in Georgetown, Texas.
GAF Timberline UHDZ (GAF)
GAF's premium laminated architectural shingle built on the high-performance UltraMat fiberglass mat, combining the LayerLock/StrikeZone nailing design with a UL 2218 Class 4 impact rating and GAF's deepest shadow bands.
GAF Woodland (GAF)
Value Collection Lifetime Designer Shingle that recreates the look of hand-cut European shingles with artisan-crafted shapes, oversized tabs, and a dimensional design, at a fraction of the cost of slate or wood shakes. Carries a UL 2218 Class 4 impact-resistance rating and GAF's Advanced Protection Shingle Technology.
R-Mer Loc (The Garland Company)
Architectural/structural standing seam metal roof panel with a 1 3/4 in. vertical seam, factory-applied hot melt seam sealant and an 18 gauge one-piece concealed clip, for re-roofs, mansards and new construction. Available in 22 and 24 gauge G-90 galvanized steel and .040 aluminum, in 12, 16 and 18 in. panel widths, with factory roll-formed lengths up to 50 ft. Installs over open purlins at slopes down to 3:12 and over solid substrate down to 1 1/2:12. The data sheet lists a UL 90 classification per UL 580, a Class A fire rating per UL 790, and roof system compliance with ASTM E 1592; Garland lists 20 and 30 year warranties as available.
Cordova (Gladding McBean)
A two-piece, high-profile barrel clay roof tile inspired by Spanish and Italian architecture. Per IAPMO UES ER-510 (Table 2), Cordova is graded Type I-High Profile/Grade 1 under ASTM C1167, measures 18 in. long by 8 in. wide by 1/2 in. thick with a 2-5/8 in. barrel height, and installs at 11.5 in. center-to-center spacing with a 3 in. head lap for an installed dry weight of 10.3 psf (an alternative 10.75 in. spacing with a 4 in. head lap gives 11.3 psf). Offered in color blends including Presidio, Spanish Bay Blend, Monterey Blend, Bautista Blend, Kiln Run #8 Mix, Franciscan Blend and Blended Red.
Cotswold Shingles (Gladding McBean)
A flat-profile clay roof tile styled after English stone shingle roofing, laid at a random, generally 8 in. head lap. Per IAPMO UES ER-510 (Table 2), Cotswold Shingles are graded Type III-Flat Profile/Grade 1 under ASTM C1167, are 14 in. long by 5/8 in. thick, and are supplied in four widths (6.5, 7.25, 8.5 and 9.0 in.) that are mixed on the roof; installed dry weight for the course ranges 8.9 to 11.4 psf.
Italian (Gladding McBean)
A flat-profile clay roof tile in a traditional Italian pattern, laid with overlapping pan and cover tiles. Per IAPMO UES ER-510 (Table 2), Italian is graded Type III-Flat Profile/Grade 1 under ASTM C1167, measures 18 in. long by 12 in. wide by 5/8 in. thick with a 2.0 in. height, and installs at 19.0 in. center-to-center spacing with a 4 in. head lap for an installed dry weight of 10.4 psf (weight and coverage vary when combined with other tile covers or pans, per the report's Figure 4).
Lincoln Interlocking (Gladding McBean)
A flat-profile interlocking clay roof tile with a center rib and mitered ridge/hip pieces. Per IAPMO UES ER-510 (Table 2), Lincoln Interlocking is graded Type III-Flat Profile/Grade 1 under ASTM C1167, measures 14 in. long by 9 in. wide by 1/2 in. thick with a 1-1/4 in. height, and installs at 8.8 in. center-to-center spacing with a 3 in. head lap for an installed dry weight of 9.2 psf.
Placer Interlocking (Gladding McBean)
A flat-profile interlocking clay roof tile. Per IAPMO UES ER-510 (Table 2), Placer Interlocking is graded Type III-Flat Profile/Grade 1 under ASTM C1167, measures 15 in. long by 10 in. wide by 3/4 in. thick, and installs at 9.8 in. center-to-center spacing with a 3 in. head lap for an installed dry weight of 11.2 psf. Shares chimney-flashing details with Lincoln Interlocking in the manufacturer's installation drawings.
Henry Pro-Grade 988 Silicone Roof Coating (Henry Company)
Pro-Grade 988 is a 100 percent silicone, high-solids, solvent-free, one-component, moisture-curing silicone rubber roof coating for existing smooth asphaltic BUR, cap sheet, single-ply membranes, metal and spray polyurethane foam, which the maker says can be applied in excess of 50 mils in a single coat and is permanently resistant to ponding water. Its technical data sheet reports 92 percent solids by volume, 280 percent elongation and 320 psi tensile strength (ASTM D412), a Class A flame spread rating under ASTM E108/UL790, an initial SRI of 110 and a three-year aged SRI of 106 for white, CRRC product ID 0620-0053, Florida Product Approval FL10889-R3, Miami-Dade NOA 23-0316.02 and FM approval, and states it meets or exceeds ASTM D6694. The product page offers a limited lifetime warranty flyer, and the line is sold in white and several colors.
Elevate RubberGard EPDM (Elevate)
A single-ply EPDM synthetic rubber membrane for commercial low-slope roofs, available fully adhered, mechanically attached, or ballasted. Sold under Elevate (formerly Firestone Building Products, then Holcim Elevate; the Elevate brand is now part of the Amrize family of brands as of the June 2025 Holcim/Amrize spin-off). The live product page confirms the same fully-adhered/mechanically-attached/ballasted installation options as before and states RubberGard EPDM has been in the field since 1980.
Elevate UltraPly TPO (Elevate)
Elevate's (formerly Firestone Building Products, then Holcim Elevate; the Elevate brand is now part of the Amrize family of brands as of the June 2025 Holcim/Amrize spin-off) polyester-reinforced thermoplastic polyolefin single-ply membrane for commercial low-slope roofs. The dedicated UltraPly TPO product page confirms it is "Available in thicknesses of .045", .060" and .080"" and "Available in reflective white, tan or gray," and that white and tan UltraPly TPO membranes are CRRC (Cool Roof Rating Council) listed and meet California Title 24 energy standards.
IB Acrylic Pro Coating (IB Roof Systems)
IB Acrylic Pro is a single-component, water-based, 100 percent acrylic elastomeric roof coating for metal panel roofs, primed smooth and granule-surfaced asphaltic roofs, concrete, aged EPDM, polyurethane foam and aged thermoplastic single-ply membranes. The technical data sheet (Rev. 01-2024) prints 53 percent solids by volume, 325 percent initial elongation and 257 psi initial tensile strength by ASTM D2370, VOC under 50 g/L, a white solar reflectance index of 110 initial and 99 after three years, and a coverage rate of 1.0 to 1.75 gallons per 100 square feet per pass. Its approvals list says it meets ASTM D6083, carries a "UL Class A Fire Classification per UL790/ASTM E108", is CRRC listed, Title 24 compliant and holds a Florida Building Code product approval. It comes in white, gray and tan in 5, 55 and 275 gallon containers.
IB Acrylic SW Coating (IB Roof Systems)
IB Acrylic SW is a highly reflective, single-component, water-based acrylic elastomeric roof coating that IB Roof Systems designs for hot-weather climates, for aged galvanized metal panel roofs, primed smooth and granule-surfaced asphaltic roofs, polyurethane foam and aged aluminized asphaltic roofs. The technical data sheet (Rev. 01-2024) marks it climate-zone restricted: it is not suitable for, and is ineligible for an IB coating warranty in, mountain climates or areas where the temperature can stay below freezing for more than 24 hours, and it names southern California and the Mojave, Sonoran and Chihuahuan desert regions as examples of its use area. It prints 53 percent solids by volume, VOC under 50 g/L, solar reflectance index values of 104 initial and 90 aged for white and 90 and 84 for cool sand, and a "UL Class A Fire Classification per UL790/ASTM E108"; it is CRRC listed and Title 24 compliant. It comes in white and cool sand in 5, 55 and 275 gallon containers.
IKO Armourshake (IKO)
IKO's heavyweight designer shingle offering the weathered look and depth of cedar shakes. Constructed of two fiberglass mats laminated together for a double-layer of asphalt. Class 3 impact resistance standard, with a Class 4 option available in Shadow Black only. Standard 110 mph wind resistance, upgradeable to 130 mph with IKO PROFORMAX accessories under the High Wind Limited Warranty Upgrade.
IKO Cambridge Cool Colors Plus (IKO)
Solar-reflective version of IKO's Cambridge architectural laminated shingle. Embedded infrared-reflective pigments deliver a Solar Reflectance Index (SRI) of 20 or greater, exceeding California Title 24, Part 6 roof reflectivity requirements by 25 percent. Features FastLock sealant bonding to help prevent shingle lift, blue-green algae-resistant granules, and a 110 mph limited wind warranty upgradable to 130 mph with the high-wind application. Offered in nine colors and available in select U.S. regions.
IKO Cambridge (IKO)
IKO's popular architectural laminated asphalt shingle, built on a fiberglass core with FastLock sealant. A mainstream dimensional shingle with a Limited Lifetime warranty.
IKO Crowne Slate (IKO)
IKO's premium designer shingle that mimics the appeal of natural slate tiles, with a 10-inch exposure and a uniformly square profile. Two-layer laminated fiberglass construction (oxidized-asphalt lower shim with modified-asphalt upper "dragon's teeth") gives it a Class 4 impact resistance rating. Standard 110 mph wind resistance, upgradeable to 130 mph with IKO's high wind application.
IKO Dynasty Cool Colors Plus (IKO)
Solar-reflective version of IKO's Dynasty performance laminated shingle. Embedded infrared-reflective pigments deliver a Solar Reflectance Index (SRI) of 20 or greater, exceeding California Title 24, Part 6 roof reflectivity requirements by 25 percent. Retains the tear-resistant woven ArmourZone reinforced nailing surface for high-wind and pull-through resistance, blue-green algae-resistant granules, an FM 4473 Class 3 impact rating, and a 130 mph limited wind warranty. Available in select U.S. regions.
IKO Dynasty (IKO)
IKO's performance architectural shingle featuring the ArmourZone reinforced nailing band for high wind and fastener pull-through resistance.
IKO Hip & Ridge 12 (IKO)
Hip & Ridge 12 is IKO's fiberglass-reinforced, perforated and tapered hip and ridge cap shingle that yields three capping pieces from each 36 in. x 13 1/4 in. shingle, at a 5 5/8 in. exposure and 29.53 linear ft. per bundle, with IKO's FastLock sealant and blue-green algae resistance. IKO's technical data sheet (04/2026) lists it with an FM 4473 / UL 2218 Class 3 impact resistance rating, which IKO presents solely to help owners obtain an insurance premium discount and states is not a guarantee of impact performance; hail damage is not covered under the limited warranty. IKO states that Hip and Ridge 12, Hip and Ridge Class 4 or an equivalent IKO-approved cap is required for warranty coverage of its shingles.
IKO Hip & Ridge Class 4 (IKO)
Hip & Ridge Class 4 is the impact-resistant version of IKO's three-piece hip and ridge cap shingle: the same perforated, tapered 36 in. x 13 1/4 in. format as Hip & Ridge 12, with polymer-modified asphalt added for impact resistance. IKO's technical data sheet (04/2026) lists it with an FM 4473 / UL 2218 Class 4 impact resistance rating, alongside ASTM D3161 Class F and ASTM D7158 Class H wind and ASTM E108 / UL 790 Class A fire. IKO pairs it with Class 4 field shingles such as Nordic.
IKO Leading Edge Plus (IKO)
Leading Edge Plus is IKO's fiberglass-reinforced asphalt starter strip shingle, perforated down the middle so each 40 7/8 in. shingle separates into two 7 7/8 in. starter strips, 32 strips and 109 linear ft. per bundle, with a FastLock sealant strip along the edge to help resist wind uplift and blow-off at eaves and rakes. IKO notes its wind and fire ratings apply when installed over an approved underlayment.
IKO Marathon Plus AR (IKO)
IKO's time-tested traditional 3-tab shingle built on a fiberglass mat, with embedded algae-resistant granules that help control black streaks caused by blue-green algae. Metric sizing (39 3/8 in x 13 1/4 in, 5 5/8 in exposure) is larger than many comparable shingles in its class for faster installation.
IKO Nordic (IKO)
IKO's polymer-modified architectural shingle reinforced for flexibility and tear resistance, earning a UL 2218 Class 4 impact rating that acts like a shock absorber against hail.
IKO Royal Estate (IKO)
IKO's designer shingle combining premium natural-slate looks with heavy-duty construction and added asphalt. Random-cut contours and deep shadow bands create architectural depth, with algae-resistant granules to inhibit blue-green algae discoloration. Rated UL 2218 Class 3 for impact resistance and carries a 110 mph limited wind warranty, upgradable to 130 mph with the high-wind application. Available in Harvest Slate, Mountain Slate, Shadow Slate, and Taupe Slate.
IKO UltraHP IR (IKO)
UltraHP IR is the impact-resistant version of IKO's preformed two-layer high-profile hip and ridge cap, 11 1/2 in. x 10 in. with an 8 1/4 in. exposure. IKO's technical data sheet (11/2025) lists UL 2218 Class 4 impact resistance for UltraHP IR only, and IKO states that UltraHP IR should be used where a full roof system impact rating is required.
IKO UltraHP (IKO)
UltraHP is IKO's preformed, precut two-layer high-profile hip and ridge cap shingle, 11 1/2 in. x 10 in. with an 8 1/4 in. exposure and 20 linear ft. per bundle, needing no cutting or folding. IKO notes that, being 10 in. wide, it requires a ridge vent 9 in. wide or less, and that only UltraHP IR, not UltraHP, should be used with impact-resistant shingles.
Johns Manville JM TPO (Johns Manville)
Johns Manville's thermoplastic polyolefin single-ply membrane for commercial low-slope roofs, heat-welded at the seams and available in reflective white for cool-roof performance.
KasselShake Steel Shingles (Isaiah Industries)
Isaiah Industries' Kassel & Irons steel shake, stamped for a thick, random hand-split shake look from .0165 in. G90 galvanized steel with a textured Kynar 500 (ThermoBond) or Hylar 5000 PVDF finish. Its brochure lists a 48 in. by 12 in. panel exposure, 25 panels per square, a weight of 100 lbs per square and deeply formed four-way interlocking panels with a concealed nail fastener. The product page states UL 2218 Class IV impact resistance, UL 790 Class A fire resistance and UL 580 Class 90 wind uplift resistance, with a 120 mph wind warranty and a 30-year fade resistance warranty. The brochure describes a non-prorated lifetime limited warranty covering materials and labor that transfers to later owners for up to 40 years from installation. UL's listing of Isaiah Industries' roof coverings names KasselShake among its Class 4 steel tile shingles.
KasselWood Steel Shingles (Isaiah Industries)
Isaiah Industries' Kassel & Irons textured, symmetrical steel shingle, in colors meant to reproduce the look of cedar, slate or standard shingles under a PPG Duranar PVDF coating. Its brochure lists 29 gauge ASTM A653 G90 galvanized steel with a Kynar 500 finish, a 40.625 in. by 8.625 in. panel exposure, 41.10 panels per square and a weight of 85.70 lbs per square. The product page states a UL 2218 Class IV impact resistance rating, UL 790 Class A fire resistance and UL 580 Class 90 wind uplift resistance tested for winds up to 120 mph, and describes a lifetime, 40-year transferable, non-prorated warranty covering material and labor. UL's listing of Isaiah Industries' roof coverings names KasselWood among its Class 4 steel tile shingles.
KEMPEROL 2K FR Color Series (Kemper System America)
KEMPEROL 2K FR Color Series is a two-component, UV and color stable, cold liquid-applied, fully reinforced polyurethane roofing resin that cures to a finished surface with no topcoat, which the maker says was engineered in Germany and is now made in the USA. Its technical data sheet reports a 90 mil membrane thickness with 165 fleece, lists initial and three-year aged SRI by color from Reflect White at 110 and 98 down to Bronze at 6 and 8, gives a CRRC listing for the Reflect White only, and states the membrane achieves a Class A fire rating as part of an assembly in accordance with ASTM E 108 / UL 790.
KEMPEROL AC Speed FR (Kemper System America)
KEMPEROL AC Speed FR is a quick-curing, cold liquid-applied polymethyl methacrylate (PMMA) roofing and waterproofing resin, fully reinforced with needle-punched polyester fleece, for exposed or buried applications that the maker says can allow same-day installation, including direct-to-deck, insulated and recover roof assemblies. Its technical data sheet reports a 90 mil membrane thickness with 120 fleece, an initial SRI of 108 for white and 27 for gray, a CRRC listing for the white only, and states the membrane achieves a Class A fire rating as part of an assembly in accordance with ASTM E 108 / UL 790. The product page and the data sheet print different figures for some properties, including tearing resistance (80 lbf on the page, 65 lbf on the data sheet) and dimensional stability (0.05 percent against 0.15 percent).
Ludowici French (Ludowici Roof Tile)
A low-profile interlocking clay roof tile that Ludowici says it introduced in the 1890s, with deep locks on all four sides and two prominent surface flutes for drainage and shadow. The product page prints a smooth base texture, 1025 lbs per square, 133 pieces per square, an overall size of 9 by 16-1/4 inches, an exposure of 8-1/8 by 13-3/8 inches and a 3:12 recommended minimum slope. It is offered in all standard and custom Ludowici colors except the Impressionist Series. The data sheet prints water absorption less than 2 percent. IAPMO UES ER-452 (rev. 05/29/2026, section 4.2) lists the French tile as a Class A roof covering under ASTM E108 over ASTM D226 Type II underlayment on a nominal 0.5-inch plywood deck.
Malarkey EZ-Ridge (Malarkey Roofing Products)
EZ-Ridge is Malarkey's high-profile hip and ridge shingle made on a non-woven fiberglass mat coated with NEX polymer-modified asphalt, with 3M Scotchgard Protector algae resistance and 3M smog-reducing granules, blended to match Malarkey field shingles. It comes 8 in. wide (SKU 222) or 10 in. wide as EZ-Ridge XT (SKU 224), both 11 1/2 in. long at an 8 1/4 in. exposure, 30 shingles and 20 ft. of linear coverage per box. Both data sheets list ASTM D3161 Class F, ASTM E108 Class A and UL 2218 Class 4. Installed with algae-resistant shingles it is covered by Malarkey's Limited Lifetime Scotchgard Protector warranty against blue-green algae; installed separately it carries a 10-year product warranty against manufacturing defects.
Malarkey Highlander Cool (Malarkey Roofing Products)
Highlander Cool (SKU 245) is the solar-reflective version of Malarkey's Highlander laminated architectural shingle, made with NEX polymer-modified asphalt and 3M Cool Roofing Granules that raise the solar reflectance of darker colors; Malarkey states its colors are listed with the Cool Roof Rating Council and can be used to comply with California Title 24, Part 6 cool roof requirements. The data sheet lists ASTM D7158 Class H, ASTM D3161 Class F, ASTM E108 Class A and UL 2218 Class 3, with a Limited Lifetime Warranty and a 110 mph limited wind warranty that can be combined with other Malarkey products for a 130 mph enhanced wind warranty.
Malarkey Highlander (Malarkey Roofing Products)
Malarkey's core architectural shingle made with NEX polymer-modified (rubberized) asphalt blending high-grade asphalt with upcycled rubber and plastic polymers. Carries a Class 3 hail impact rating and smog-reducing granules, with wind warranty coverage up to 130 mph in an enhanced system.
Malarkey Legacy (Malarkey Roofing Products)
Malarkey's premium SBS polymer-modified (rubberized asphalt) architectural shingle, rated UL 2218 Class 4 for impact resistance and incorporating NEX smog-reducing granules.
Malarkey 502 Pano Cap (Malarkey Roofing Products)
Malarkey's hot-asphalt-applied, fiberglass-reinforced conventional (non-modified) asphalt cap sheet for commercial low-slope built-up roofing, used as the top, exposed ply of a 2-4 layer multi-ply system. The manufacturer states an extended system warranty of "up to 20 years," available only when the product is installed as part of a complete Malarkey low-slope roofing system.
Malarkey 601 Paragon MOD Cap (Malarkey Roofing Products)
Malarkey's hot-asphalt-applied SBS polymer-modified (rubberized) asphalt cap sheet for commercial low-slope roofing, reinforced with fiberglass and used as the top, exposed ply of a 2-4 layer modified-bitumen system. The manufacturer states an extended system warranty of "up to 30 years," available only when the product is installed as part of a complete Malarkey low-slope roofing system.
Malarkey RidgeFlex (Malarkey Roofing Products)
RidgeFlex is Malarkey's low-profile hip and ridge shingle, a perforated strip that separates into caps, made on a non-woven fiberglass mat impregnated and coated with NEX polymer-modified asphalt, with 3M Scotchgard Protector and smog-reducing granules. It comes as 10 in. RidgeFlex (SKU 225, 41 ft. 3 in. per bundle) and 12 in. RidgeFlex for wider ridge vents (SKU 227, 30 ft. 11 in. per bundle), each 13 1/4 in. long at a 5 5/8 in. exposure. Both data sheets list ASTM D7158 Class H, ASTM D3161 Class F, ASTM E108 Class A and UL 2218 Class 4. Installed with algae-resistant shingles it is covered by Malarkey's Limited Lifetime Scotchgard Protector warranty; installed separately it carries a 10-year product warranty against manufacturing defects.
Malarkey Smart Start (Malarkey Roofing Products)
Smart Start (SKU 210) is Malarkey's full-size starter shingle, 16 3/8 in. x 38 1/4 in., perforated to separate into two code-compliant starter pieces for shingle exposures up to 6 3/16 in.; 18 full-size shingles (36 pieces) give 114 ft. 9 in. per bundle. It is made on a non-woven fiberglass mat coated with NEX polymer-modified asphalt, and Malarkey requires it under its shingles at the eave and recommends it at rakes; Windsor installations require Smart Start under the Windsor Starter. It is eligible for Limited Lifetime Warranty coverage when used with Malarkey shingles and one other Malarkey accessory.
Malarkey Vista Cool (Malarkey Roofing Products)
Vista Cool (SKU 255) is the solar-reflective version of Malarkey's Vista laminated architectural shingle, made with NEX polymer-modified asphalt and 3M Cool Roofing Granules; Malarkey states its colors are listed with the Cool Roof Rating Council and can be used to comply with California Title 24, Part 6 and Los Angeles County Title 31 cool roof requirements. The data sheet lists ASTM D7158 Class H, ASTM D3161 Class F, ASTM E108 Class A and UL 2218 Class 4, with a Limited Lifetime Warranty and a 110 mph limited wind warranty that can be combined with other Malarkey products for a 130 mph enhanced wind warranty.
Malarkey Vista (Malarkey Roofing Products)
Malarkey's NEX polymer-modified (rubberized) asphalt architectural shingle, engineered with upcycled rubber and plastic for all-weather resilience and a UL 2218 Class 4 hail impact rating.
Malarkey Windsor (Malarkey Roofing Products)
Malarkey's designer-profile shingle built on NEX polymer-modified (rubberized) asphalt, which blends SBS rubber and plastic polymers into the asphalt core for a UL 2218 Class 4 impact rating and enhanced granule adhesion.
MCA 8-Inch Straight Barrel Mission (MCA Clay Roof Tile)
8-Inch Straight Barrel Mission (item code UA02) is MCA's straight barrel Mission clay roof tile, made in the USA for restoration of historical projects and for new construction, with colors and textures matched to older tile on request. MCA prints a 19 x 8 in. tile with a 16 x 11 in. O.C. exposure, 6 lbs. per piece, and 164 pieces and 984 lbs. per square. The page lists ASTM C1167 Grade 1, Class A under ASTM E108 (UL 790), IAPMO Uniform Evaluation Report No. 0356, TDI Approval RC-21 and Miami-Dade County Approval 21-1215.04.
MCA Classic Tapered Mission (MCA Clay Roof Tile)
Classic Tapered Mission (item code TF02) is MCA's two-piece tapered Mission clay roof tile, laid as tops and pans and offered in Natural Red (F40) terra cotta plus standard and custom colors and blends. MCA prints a 19 x 7.5 in. tile with a 16 x 10 in. O.C. exposure, 5.6 lbs. per piece, and 180 pieces (90 tops and 90 pans) and 1008 lbs. per square. The page lists ASTM C1167 Grade 1, Class A under ASTM E108 (UL 790), IAPMO Uniform Evaluation Report No. 0356, TDI Approval RC-21 and Miami-Dade County Approval 21-1215.06.
MCA Dome Tile (MCA Clay Roof Tile)
Dome Tile is MCA's fish-scale clay roof tile for domed roofs, made in nine sizes calculated to the dome height and circumference so the tiles step down in size as the circumference narrows toward the top. MCA states the tile is decorative and requires a watertight membrane and a nailable roof deck surface, and asks that its sales office be contacted during the design stage. The page lists ASTM C1167 Grade 1 and Class A under ASTM E108 (UL 790).
MCA Historical Tile (MCA Clay Roof Tile)
Historical Tile is MCA's line of replacement clay roof tile reproduced from a sample of a building's existing tile; MCA states that for extruded tile it has no minimum piece requirement or tooling charge. The published selections include S tiles (such as Old LA Brick S, Baby S, Double S and Old San Valle S), two-piece and straight Mission tiles in several widths and lengths, clay shingles and water-channel pieces, each listed with dimensions, exposure and piece weight, and colors and textures can be matched. The page lists ASTM C1167 Grade 1 and Class A under ASTM E108 (UL 790), and states a 50-year limited warranty is available.
MCA Turret Tile (MCA Clay Roof Tile)
Turret Tile is MCA's pre-cut clay roof tile system for conical turret and fan-shaped roofs, sized per job from roof plans or roofer measurements with larger tiles at the bottom and smaller tapered tiles at the top, so the tiles need no field cutting. It is offered in Natural Red, flashed and standard blends, with custom colors and blends available. MCA states it is decorative tile that requires a watertight membrane. The page lists ASTM C1167 Grade 1, Class A under ASTM E108 (UL 790) and IAPMO Uniform Evaluation Report No. 0356.
238T (McElroy Metal)
McElroy Metal's symmetrical mechanically seamed standing seam panel with a 2 3/8-inch seam and matching left/right seam legs, so panels are non-directional and individually replaceable. Available in 16, 18, and 24-inch widths (24-inch formed on-site only) in plank-and-pencil, plank, striated, minor-rib, or flat profiles. Standard substrate is 24 gauge Galvalume steel (50 ksi), with 22 gauge Galvalume, .032/.040 aluminum, or 20 oz. copper optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Installs on slopes down to 1/2:12 (1/4:12 with prior approval) in continuous factory lengths up to 200 feet.
Max-Rib (McElroy Metal)
McElroy Metal's exposed-fastener corrugated panel with a 3/4-inch rib height on 9-inch centers and 36-inch coverage width (38/38.5-inch overall width). Standard substrate is 29 gauge Galvalume steel (80 ksi), with 24 and 26 gauge (50 ksi) optional, finished in Acrylic Coated Galvalume, Kynar 500 PVDF, or siliconized polyester/polyester. Installs over plywood or purlins on slopes down to 1:12, with tape sealant required in the side-laps on slopes between 3:12 and 1:12; standard panel lengths run up to 40 feet.
Maxima (McElroy Metal)
McElroy Metal's mechanically seamed, concealed-fastener standing seam family, field-seamed to a 90-degree lock with factory-applied in-seam sealant. Offered in four configurations - Maxima 1.5 (1.5-inch seam), Maxima 2 and Maxima ADV (2-inch seam), and Maxima 3 (3-inch seam) - in panel widths from 12 to 24 inches. Standard substrate is 24 gauge Galvalume steel (50 ksi, ASTM A792), with 22 gauge Galvalume or .032-inch aluminum optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Minimum slope ranges from 1/4:12 to 1:12 depending on configuration.
Meridian (McElroy Metal)
McElroy Metal's clipless, snap-together standing seam panel with a 0.91-inch rib height, fastened to solid decking through a prepunched flange rather than separate clips. Available in 12 and 16-inch panel widths, standard 24 gauge Galvalume steel (26 gauge also offered on the 16-inch width), finished in Galvalume Plus acrylic or Kynar 500 PVDF. Requires a minimum 3:12 roof slope over solid decking.
Multi-Cor (McElroy Metal)
McElroy Metal's corrugated exposed fastener roof and wall panel with 7/8-inch rounded corrugations on 2.67-inch centers and 32-inch coverage. It installs over plywood or purlins at slopes down to 1:12, with tape sealant required in the side-laps, in standard lengths up to 50 feet. Standard substrate is 26 gauge Galvalume (ASTM A792), with 24 and 22 gauge options, finished in Kynar 500 PVDF, silicone-modified polyester or acrylic-coated Galvalume. The product data sheet lists UL 580 Class 90, UL 790 Class A and UL 2218 Class 4; McElroy also lists UL 263 Class A, a Texas Department of Insurance listing over plywood deck and Florida Product Approval.
U-Panel (McElroy Metal)
McElroy Metal's low-profile exposed fastener roof and wall panel with a 47/64-inch rib on 6-inch centers and 36-inch coverage, also made with a purlin bearing leg (PBU). For roofs it requires a minimum slope of 2:12 with tape sealant in the side-laps, over solid deck or open framing, in standard lengths up to 50 feet. Standard roof substrate is 26 gauge Galvalume (ASTM A792), finished in Kynar 500 PVDF, silicone-modified polyester or acrylic-coated Galvalume. The product data sheet lists UL 580 Class 90, UL 263 and UL 790 Class A, and UL 2218 Class 4; McElroy also lists Florida Product Approval and IAPMO report ER-0270.
Acrylic Clear Base (Metacrylics)
Acrylic Clear Base is a transparent, water-based, self-priming acrylic elastomeric base coat that saturates Metacrylics polyester fabric in reinforced roof systems and can serve as a universal primer over existing surfaces; it must be protected from UV by a Metacrylics acrylic top coat. Its technical data sheet lists wind uplift of 105 PSF and fire resistance of Class A ASTM E-108 UL Standard 790, with tensile and elongation figures given for the coating with fabric.
Acrylic Gray Base (Metacrylics)
Acrylic Gray Base is a gray water-based acrylic elastomeric base coat formulated to saturate polyester fabric in reinforced roof and walking-surface systems, applied with Metacrylics primer and top coats over asphalt roofs, cap sheet, metal, concrete, wood, foam, single-ply and stucco, and it must be protected from UV by an acrylic white or colour coat. Its technical data sheet lists a VOC of 11.73 g/L, 67.9 percent solids by weight, wind uplift of 105 PSF and fire resistance of Class A ASTM E-108 UL Standard 790.
Extreme Weather Acrylic White (Metacrylics)
Extreme Weather is a water-based acrylic elastomeric top coat for roofs, walking decks and walking surfaces, used with Metacrylics primer, base coat and polyester fabric over BUR, cap sheet, metal, concrete, wood, foam, single-ply and stucco. Its technical data sheet lists initial solar reflectance of 0.87, thermal emittance of 0.90, an SRI of 111, a VOC of 27.5 g/L, 68.4 percent solids by weight, an ICC-ES listed report (No. 4785), wind uplift of 105 PSF and fire resistance of Class A ASTM E-108 UL Standard 790. The product page says it is offered in 20 colours, while the data sheet gives white as the colour.
1.75" Snap Lock (Metal America)
The 1.75 inch Snap Lock is a concealed-fastener standing seam steel roof and wall panel with a clip system, 14 inch coverage and a 1.75 inch rib, intended for long runs on light commercial, industrial and agricultural buildings. It is offered flat, with striations or with two minor ribs, in 26 gauge (24 gauge on inquiry) Grade 50 steel with Weather XL (26 gauge) or Fluropon PVDF (24 gauge) paint, factory made to length up to 50 feet or roll-formed on site. It can be installed over open steel purlins, steel deck, steel deck with polyiso board, or solid wood decking, at a 2:12 minimum slope. The spec sheet lists, for this panel, UL 580 Class 90 wind uplift, UL 2218 Class 4 hail impact and UL 790 Class A fire, plus ASTM E1680, E1646, E283, E331, E330/E330M and E1592.
7/8" Corrugated (Metal America)
The 7/8 inch Corrugated panel is an exposed-fastener wave-profile steel roof and wall panel. The spec sheet lists 26 gauge (24 gauge on inquiry) and 22 gauge Cor-Ten Grade 50 steel, in painted (Weather XL or Fluropon PVDF), Galvalume or Cor-Ten finishes, and a 1:12 minimum slope with butyl sealant and stitch screws at side laps below 3:12; the product page lists custom lengths from 36 inches to 45 feet. It lists UL 580 Class 90 wind uplift, UL 2218 Class 4 hail impact and UL 790 Class A fire testing, plus ASTM E1680, E1646, E283, E330/E330M and E331.
PBR Panel (Metal America)
The PBR Panel is an exposed-fastener R-panel for roofing and siding with 36 inch coverage and a 1-1/4 inch rib on 12 inch centers. The spec sheet lists 26 gauge Grade 80 steel (24 gauge on inquiry) with Weather XL (26 gauge) or Fluropon PVDF (24 gauge) paint, and a 1:12 minimum slope with butyl sealant and stitch screws at side laps below 3:12; the product page lists lengths up to 45 feet. It lists UL 580 Class 90 wind uplift, UL 2218 Class 4 hail impact and UL 790 Class A fire testing.
Tuff Rib (Metal America)
Tuff Rib is an exposed-fastener ribbed steel roof and wall panel with 36 inch coverage, a 3/4 inch rib and anti-siphon grooves. The spec sheet lists 29 gauge Grade 80 steel, painted (Weather XL) or Galvalume, in lengths from 36 inches to 50 feet, a 3:12 minimum slope, and installation over open framing. It lists UL 580 Class 90 wind uplift, UL 2218 Class 4 hail impact and UL 790 Class A fire testing.
7.2 Panel (Metal Panels Inc.)
The 7.2 Panel is an exposed-fastener steel roof and wall panel with a symmetrical 1.5 inch trapezoidal rib on 7.2 inch centres, an anti-siphon rib and 36 inch coverage in 24 and 22 gauge (narrower coverage in 26 gauge). It can be installed vertically or horizontally, and the profile sheet gives a minimum slope of 1/2:12. MPI's UL certification sheet lists UL 580 Class 90 (constructions 137 and 244), UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, and compliance with ASTM E1592 uplift, ASTM E1680 air leakage and ASTM E1646 water penetration.
7/8" Corrugated Panel (Metal Panels Inc.)
7/8 inch Corrugated Panel is an exposed-fastener steel roof and wall panel with a 7/8 inch corrugation at 2.67 inch centres, giving 37-3/8 inch coverage in 24 gauge and 32 inch coverage in 26 gauge, also offered in 22 gauge. The minimum recommended roof slope is 3:12, and the panel can be curved for architectural use. MPI's UL certification sheet lists UL 580 Class 90 (construction 649), UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, and compliance with ASTM E1592, ASTM E1680 and ASTM E1646.
AG Panel (Metal Panels Inc.)
AG Panel is an exposed-fastener steel roof and wall panel with 36 inch coverage and a 3/4 inch rib on 9 inch centres, with an anti-siphon rib and hug leg. It is manufactured in 29, 26 and 24 gauge in SMP and PVDF colours plus Galvalume, with a minimum recommended slope of 3:12. MPI's UL certification sheet lists UL 580 Class 90 (construction 560), UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, and Florida Product Approval FL3900.2-R2.
FF1 Panel (Metal Panels Inc.)
FF1 is a snap-together standing seam steel roof panel with a 1 inch seam, fastened with pancake fasteners through a hidden flange and installed over solid decking. It offers 16 inch coverage in 26 gauge and 12, 16 or 18 inch coverage in 24 gauge, with pan striations required on 26 gauge, and a minimum slope of 3:12. MPI's UL certification sheet lists UL 580 Class 90 (constructions 618 and 529), UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, and Florida Product Approval FL3900-R2.
Flat-Loc Panel (Metal Panels Inc.)
Flat-Loc is a low-profile 5-rib exposed-fastener steel panel for roofing, siding, liner and post-frame buildings, with 36 inch coverage and a 9/16 inch rib on 9 inch centres. It is manufactured in 29, 26 and 24 gauge in SMP and PVDF colours plus Galvalume, with a minimum recommended slope of 3:12. MPI's UL certification sheet lists UL 2218 Class IV impact and ASTM E108/UL 790 Class A fire for the panel.
LF1 Panel (Metal Panels Inc.)
LF1 is a flat-pan standing seam steel roof panel with a 1 inch mechanically seamed rib and clip offsets, used over solid decking or closely spaced open purlins. It offers 17 inch coverage in 26 gauge and 13, 17 or 21 inch coverage in 24 gauge, with pan striations required on 26 gauge, and a minimum slope of 2:12. MPI's UL certification sheet lists UL 2218 Class IV impact and ASTM E108/UL 790 Class A fire for the panel.
LF15 Panel (Metal Panels Inc.)
LF15 is a flat-pan standing seam steel roof panel with a 1-1/2 inch mechanically seamed rib and hidden clips, used over solid decking or closely spaced open purlins. It offers 16 inch coverage in 26 gauge and 16, 18 or 20 inch coverage in 24 gauge, with pan striations required on 26 gauge, and a minimum slope of 1:12. MPI's UL certification sheet lists UL 580 Class 90 (construction 619), UL 2218 Class IV impact and ASTM E108/UL 790 Class A fire.
LF2 Panel (Metal Panels Inc.)
LF2 is an architectural and structural standing seam steel roof panel with a 2 inch rib mechanically seamed in a single- or double-lock configuration, for open purlins or solid decking. It offers 16 and 18 inch standard coverage in 24 gauge, with 22 gauge by special order, in smooth, striated or two-bead pans, and a minimum slope of 0.5:12. MPI lists it as qualified for its weathertight warranty. MPI's UL certification sheet lists UL 580 Class 90 (construction 482), UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, and Florida Product Approval FL3899.1-R2.
LF2A Panel (Metal Panels Inc.)
LF2A is a mechanically seamed architectural and structural standing seam steel roof panel with a 2 inch rib and a return leg on both the male and female seams for added strength and uplift resistance, for open purlins or solid decking. It offers 16 and 18 inch standard coverage in 24 gauge, with 22 gauge by special order, in smooth, striated or two-bead pans, and a minimum slope of 0.5:12. MPI's UL certification sheet lists UL 580 Class 90 (constructions 90, 176, 180, 238 and 238A), UL 2218 Class IV impact and ASTM E108/UL 790 Class A fire.
M-Panel (Metal Panels Inc.)
M-Panel is an exposed-fastener steel panel with 36 inch coverage and 3/4 inch ribs on 6 inch centres, used for roofs, walls and interior liners on pre-engineered metal buildings. It is made in 26 gauge, with 24 gauge by special order and 22 gauge A606, and the catalog recommends a 3:12 minimum slope with sealant required for roof applications. MPI's UL certification sheet lists UL 580 Class 60 and 90 (constructions 12 and 39), UL 2218 Class IV impact and ASTM E108/UL 790 Class A fire.
PBR Panel (Metal Panels Inc.)
PBR Panel is a purlin-bearing exposed-fastener steel panel for pre-engineered and post-frame buildings, with 36 inch coverage and a 1-1/4 inch rib on 12 inch centres. It is made in 26 gauge, with 24 and 22 gauge by special order, in SMP, PVDF, Galvalume and A606 finishes. The 2026 profile sheet gives a minimum slope of 1/2:12 with lap sealant, with lap sealant required below 3:12. MPI's UL certification sheet lists UL 580 Class 90 (construction 169), UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, ASTM E1592 compliance and Florida Product Approval FL3899.2-R2.
SL15 Snaplock Panel (Metal Panels Inc.)
SL15 is a snap-together standing seam steel roof panel with a 1-1/2 inch seam and panel clips, installed over solid decking without mechanical seaming. It offers 16 inch coverage in 26 gauge and 12, 16 or 18 inch coverage in 24 gauge, with pan striations required on 26 gauge, and a minimum slope of 3:12. MPI's UL certification sheet lists UL 580 Class 90 (construction 370), UL 2218 Class IV impact and ASTM E108/UL 790 Class A fire.
SL175 Panel (Metal Panels Inc.)
SL175 is an architectural and structural snap-lock standing seam steel roof panel with a 1.75 inch seam and hidden clips, for roofs, mansards and fascia over solid substrates or open purlins. It offers 14 inch coverage in 26 gauge and 15, 16 or 18 inch coverage in 24 gauge, with 22 gauge available, and a minimum slope of 2:12. MPI lists it as qualified for its weathertight warranty when ordered with factory-applied sealant. MPI's UL certification sheet lists UL 580 Class 90, UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, ASTM E1592 compliance, and air leakage of 0.0036 cfm/ft2 at 6.24 psf.
TS-324 Panel (Metal Panels Inc.)
TS-324 is a structural trapezoidal standing seam steel roof panel with nominal 24 inch coverage, installed over open framing, with three field-seamed options: RollLok, TripleLok and QuadLok. It is available in 24 and 22 gauge, stocked in 24 gauge Galvalume and white, with a minimum recommended slope of 1/4:12. The profile sheet publishes ASTM E1592 uplift results by seam, gauge, clip length and purlin spacing, ASTM E1680 air leakage results, and no water penetration under ASTM E1646 at 12, 30 and 50 psf. MPI's UL certification sheet lists UL 580 Class 90, UL 2218 Class IV impact, ASTM E108/UL 790 Class A fire, and Florida Product Approval FL41906.1.
Metal Sales 2" Rib Series Roof Panels (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's exposed, direct-fastened metal roof panels with a 2-inch rib, sold as profiles T2630 and T2832 with 30- or 32-inch coverage. Offered in Galvalume (ASTM A792) or galvanized (ASTM A653) steel or aluminum (ASTM B209), at a minimum roof slope of 1:12 over open framing or solid substrate. The specification data sheet lists UL 263 and UL 790 Class A fire resistance and UL 2218 Class 4 impact resistance.
Metal Sales 3" Rib Series Roof Panels (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's exposed, direct-fastened metal roof panels with a 3-inch or 3-1/2-inch rib, sold as profiles T13, T13-A and T13-B (box rib) and T14 (trapezoidal rib) with 24- or 30-inch coverage. Offered in Galvalume (ASTM A792) or galvanized (ASTM A653) steel or aluminum (ASTM B209), at a minimum roof slope of 1:12 over open framing or solid substrate. The specification data sheet lists UL 263 and UL 790 Class A fire resistance and UL 2218 Class 4 impact resistance.
Metal Sales 5V-Crimp (Metal Sales Manufacturing Corporation)
5V-Crimp is a residential V-rib exposed-fastener roof panel applied over plywood with at least 30 pound felt underlayment. The condensed technical reference prints 24 inch coverage with 1/2 inch ribs on 12 inch centers, 26 gauge standard and 29 and 24 gauge optional, MS Colorfast45 and acrylic-coated Galvalume finishes, a 3:12 minimum slope and lengths from 5 to 45 feet recommended, fastened with #10-14 wood screws. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, UL 580 Class 90 (constructions 579 and 453), Texas Windstorm evaluation RC-160, 2023 Florida approvals FL14645.2 and FL14645.3, and Miami-Dade NOAs 23-0711.03 and 23-0222.06.
Metal Sales 7/8 inch Corrugated (Metal Sales Manufacturing Corporation)
The 7/8 inch Corrugated panel is an exposed-fastener corrugated roof panel for open framing or solid substrate. The condensed technical reference for the roof application prints 32 inch coverage (alternate coverages available) with a 7/8 inch rib, 26 and 24 gauge standard and 22 and 20 gauge optional, MS Colorfast45, PVDF, bare galvanized and acrylic-coated Galvalume finishes with weathering steel optional, a 1:12 minimum slope and lengths from 3 to 45 feet recommended. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, ASTM E 1680, ASTM E 1646, ASTM E 283, ASTM E 331, ASTM E 1592, UL 580 Class 90 (construction 649), Texas Windstorm evaluation RC-409, 2023 Florida approval FL10999.1 and ICC-ES report ESR-2385.
Metal Sales Classic Rib (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's exposed-fastener low-profile panel with 36-inch coverage and 3/4-inch bell-top trapezoidal ribs on 9-inch centers. Offered in 29 and 26 gauge with MS Colorfast45 or acrylic-coated Galvalume finishes in ENERGY STAR listed colors, for roof, wall, liner, ceiling and soffit applications over open framing or solid substrate at a minimum 3:12 slope.
Metal Sales Clip-Loc (Metal Sales Manufacturing Corporation)
Clip-Loc is a commercial, structural integral standing rib roof system with a snap-together side lap. The condensed technical reference prints 16 inch coverage with a 1 5/8 inch rib, 26 and 24 gauge standard and 22 gauge optional, PVDF and acrylic-coated Galvalume finishes, a 1:12 minimum slope, lengths from 5 to 45 feet recommended and up to 4 inches of blanket insulation. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, ASTM E 283, ASTM E 331, ASTM E 1680 and ASTM E 1646 (with single bead tape sealant in the side lap), ASTM E 1592, UL 580 Class 90 (constructions 586, 586A and 609), ICC-ES report ESR-2385 and an AISI 1996 cantilever diaphragm test.
Metal Sales Deep Rib Series Roof Panels (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's exposed, direct-fastened trapezoidal-rib metal roof panels with a 4-inch or 4-1/2-inch rib, sold as profiles T15, T25 and TDR-6 with 18-, 24- or 30-inch coverage. Offered in Galvalume (ASTM A792) or galvanized (ASTM A653) steel or aluminum (ASTM B209), at a minimum roof slope of 1:12 over open framing or solid substrate. The specification data sheet lists UL 263 and UL 790 Class A fire resistance and UL 2218 Class 4 impact resistance.
Metal Sales Delta Rib (Metal Sales Manufacturing Corporation)
Delta Rib is a lightweight, direct-fastened roof panel for residential and agricultural buildings, with trapezoidal ribs on 8 inch centers, applied over open framing or solid substrate. The condensed technical reference prints 24 inch coverage with a 13/16 inch rib, 26 gauge standard and 29 and 24 gauge optional, MS Colorfast45 and acrylic-coated Galvalume finishes, a 3:12 minimum slope and lengths from 5 to 40 feet recommended. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code and UL 263 per assembly.
Metal Sales Image II (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's architectural standing seam roof panel with 12-, 16- or 18-inch coverage and a concealed clip designed for thermal movement, installed over solid substrate at a minimum 3:12 slope. Standard in 26 and 24 gauge (22 gauge optional) with PVDF, MS Colorfast45 or acrylic-coated Galvalume finishes, and rated UL 580 Class 90, UL 790 Class A and UL 2218 Class 4.
Metal Sales Low Rib Series Roof Panels (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's family of exposed, direct-fastened metal roof panels sold as profiles T1, T2, T3, T4, T5, T6-A, T7, T7-A, T11-A, T12 and T16-E, with trapezoidal ribs (T16-E is a box rib). Coverage runs from 34-1/8 to 44 inches and rib height from 5/8 inch to 1-3/4 inches, in Galvalume (ASTM A792) or galvanized (ASTM A653) steel or aluminum (ASTM B209), at a minimum roof slope of 1:12 over open framing or solid substrate. The specification data sheet lists UL 263 and UL 790 Class A fire resistance and UL 2218 Class 4 impact resistance, and a PVDF finish warranty of 45 years for film integrity and 35 years for chalk and fade.
Metal Sales Magna-Loc 180 (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's architectural/structural standing seam roof system with a 2-inch vertical rib, 16-inch coverage and an integral mechanically seamed 180-degree sidelap with factory-applied sealant. Concealed clips accommodate thermal movement and 1/2-inch to 6-inch blanket insulation, on roof slopes as low as 1/2:12. Formed from ASTM A792 aluminum-zinc alloy-coated Grade 50 steel (0.0230-inch or 0.0296-inch minimum thickness) or ASTM B209 .032 aluminum, in PVDF or acrylic-coated Galvalume finishes.
Metal Sales Magna-Loc (Metal Sales Manufacturing Corporation)
Magna-Loc is Metal Sales' architectural, structural vertical-rib standing seam roof panel with an integral mechanically seamed side lap and factory-applied sealant, 2 inch ribs at 16 or 18 inch coverage in flat pan, pencil-rib or striated forms, on floating clips that allow 1 1/2 inches of thermal movement each way. The condensed technical reference (headed Magna-Loc 90) prints 24 gauge standard and 22 gauge optional, PVDF and acrylic-coated Galvalume finishes, a 1/2:12 minimum slope, lengths to 45 feet recommended, factory notching and punching, and 1/2 to 6 inch blanket insulation. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, ASTM E 1680, ASTM E 1646, ASTM E 2140, ASTM E 1592, UL 580 Class 90 (constructions 506, 506A and 506B), Texas Windstorm evaluation RC-197, 2023 Florida approvals FL10999.5, FL11560.5 and FL11560.6, Miami-Dade NOAs 23-1011.10 and 23-1011.11, and ICC-ES report ESR-2385. A separate Magna-Loc 180 panel is sold alongside it.
Metal Sales Mini-Batten (Metal Sales Manufacturing Corporation)
Mini-Batten is an architectural standing rib roof system with a narrow batten cap, installed over solid substrate with at least 30 pound felt underlayment. The condensed technical reference prints 12, 16 or 18 inch coverage with 1 or 1 1/2 inch ribs, flat or striated pans, 26 and 24 gauge standard and 22 gauge optional, PVDF, MS Colorfast45 and acrylic-coated Galvalume finishes, a 3:12 minimum slope and lengths from 5 to 45 feet recommended. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, UL 580 Class 90 (constructions 397, 397A and 430 for the 1 inch batten and 352 for the 1 1/2 inch), ASTM E 1592, ASTM E 283 and ASTM E 331.
Metal Sales PBR-Panel (Metal Sales Manufacturing Corporation)
PBR-Panel is an exposed-fastener metal building roof and wall panel with trapezoidal ribs on 12 inch centers, installable horizontally or vertically. The condensed technical reference prints 36 inch coverage with a 1 1/4 inch rib, 26 and 24 gauge standard and 22 gauge optional, PVDF, MS Colorfast45 and acrylic-coated Galvalume finishes with bonderized material optional, a 1:12 minimum slope and lengths from 5 to 45 feet recommended. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, ASTM E 1592, UL 580 Class 90 (construction 161), Texas Windstorm evaluations RC-198, RC-265 and RC-279, 2023 Florida approvals including FL9482.4, FL10999.7, FL14645.11 and FL46539.3, Miami-Dade NOAs 23-1214.04 (wall) and 23-1214.05 (roof), and ICC-ES report ESR-2385; two further Florida approval numbers on the list are printed without the FL prefix.
Metal Sales Pro-Panel II (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's exposed-fastener low-profile roof and wall system with a 3/4-inch bell-top trapezoidal rib on 9-inch centers and 36-inch panel coverage, applied over open framing or solid substrate at a minimum 3:12 roof slope. Offered in 29 and 26 gauge with MS Colorfast45, ColorFit40, acrylic-coated Galvalume and galvanized finishes, and marketed for pole barns, storage sheds, utility buildings and light commercial construction as well as wall, liner, soffit, ceiling and fencing uses.
Metal Sales Seam-Loc 24 (Metal Sales Manufacturing Corporation)
Seam-Loc 24 is a structural trapezoidal standing seam roof system with a Pittsburgh double flat-locking, mechanically seamed side lap and factory-applied sealant in panel and clip. The condensed technical reference prints 24 or 18 inch coverage with a 2 11/16 inch rib, 24 gauge standard and 22 gauge optional, PVDF and acrylic-coated Galvalume finishes, a 1/4:12 minimum slope, lengths from 5 to 45 feet recommended and 1/2 to 6 inch blanket insulation. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, ASTM E 283, ASTM E 331, ASTM E 1680, ASTM E 1646, ASTM E 1592, UL 580 Class 90 (constructions 197 and 197A) and 2023 Florida approvals FL10999.8 and FL10999.9.
Metal Sales Snap-Loc 24 (Metal Sales Manufacturing Corporation)
Snap-Loc 24 is a structural trapezoidal standing seam roof system for commercial and industrial buildings, with a snap-together side lap and factory-applied sealant in both panel and clip. The condensed technical reference prints 24 inch coverage with a 3 inch rib, 24 gauge standard and 22 gauge optional, PVDF and acrylic-coated Galvalume finishes, a 1/4:12 minimum slope, lengths from 5 to 45 feet recommended, factory notching and punching, and 1/2 to 6 inch blanket insulation, over open framing or solid substrate. Its testing list prints UL 2218 Impact Resistance Class 4, UL 790 Fire Resistance Rating Class A per building code, UL 263 per assembly, ASTM E 1680, ASTM E 1646, ASTM E 1592 and UL 580 Class 90 (construction 240).
Metal Sales Vertical Seam (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's architectural standing seam roof panel with a concealed-fastener vertical seam. Tested to ASTM E1592 and UL 580 Class 90 wind uplift and UL 2218 Class 4 impact, and offered with a PVDF (Kynar 500) finish.
Enduris 3525 Coating (Momentive Performance Materials)
Enduris 3525 is a high-solids, low-VOC, primerless 100 percent alkoxy silicone roof coating for one-coat restoration over single-ply, modified bitumen, BUR, spray polyurethane foam, metal and existing coatings, with a 20-year labor and material warranty available through the maker's Approved Applicator Program. Its technical data sheet reports 90 percent volume solids, 550 percent elongation and 253 psi tensile strength (ASTM D2370), an initial SRI of 107 and an aged SRI of 77, a pass under ASTM D6694 and a CRRC rating, and states it carries Class A credentials as tested under UL 790 procedures over various substrates.
Mule-Hide 100% Silicone Roof Coating (Mule-Hide Products)
A single-part, moisture-curing 100 percent silicone roof coating for use over new spray polyurethane foam, EPDM, TPO, aged PVC, aged acrylic coatings, concrete, asphalt BUR, granulated modified bitumen and metal. The data sheet (PDS 09-9570, April 2026) prints 92 percent solids by weight and 90 percent by volume, 325 psi tensile strength and 300 percent elongation by ASTM D412, 10.7 perms, VOC under 50 g/L, a two-year shelf life, an initial solar reflectance index of 113 for white, and "Flame Spread ASTM E108 Class A". It comes in black, gray, Santa Fe tan, tan and white, with custom colours on request. The product page says up to 20-year warranties are available on multiple substrates.
DEXcell Cement Roof Board (National Gypsum Company)
DEXcell Cement Roof Board is a roof board of Portland cement and lightweight aggregate reinforced with glass mesh, made by PermaBASE for roofs exposed to moisture or high humidity and suited to fully adhered and mechanically attached single-ply, hot-mopped or torched modified bitumen, built-up, fluid-applied, metal and spray foam systems and the roof side of parapets. The submittal sheet prints 7/16 and 5/8 inch boards at 2.1 and 3.0 lb per square foot, 1,250 psi compressive strength, under 3 perms, 12-inch flute span, UL Class A to unlimited slope per UL 790, FM Class 1, compliance with FM 4450 and FM 4470, and manufacture to ASTM C1325.
DEXcell FA Glass Mat Roof Board (National Gypsum Company)
DEXcell FA Glass Mat Roof Board is the fully-adhered version of National Gypsum's glass-mat gypsum roof board, with heavy-duty coated fiberglass facers for adhesion, used as a cover board under fully adhered single-ply, cold-applied modified bitumen, fluid-applied, metal and spray foam roofs and to sheathe the roof side of parapet and penthouse walls. The submittal sheet prints 1/4, 1/2 and 5/8 inch boards, 900 psi compressive strength, 23 to 25 perms, UL Class A to unlimited slope per UL 790, FM Class 1, compliance with FM 4450 and FM 4470, Type X for 5/8 inch, and manufacture to ASTM C1177.
DEXcell FA VSH Glass Mat Roof Board (National Gypsum Company)
DEXcell FA VSH Glass Mat Roof Board is a reinforced 5/8 inch gypsum roof board with a moisture-resistant core and precoated heavy-duty glass mat facers, approved for single-ply and multi-ply assemblies meeting the FM Very Severe Hail (VSH) classification and meant to cut adhesive use and often the need for primer under fully adhered membranes; it also sheathes the roof side of parapets. The submittal sheet prints 4 by 4 and 4 by 8 foot boards at 2.9 lb per square foot, UL Class A to unlimited slope per UL 790, FM Class 1, compliance with FM 4450 and FM 4470, a mold score of 10 (ASTM D3273) and manufacture to ASTM C1177.
DEXcell Glass Mat Roof Board (National Gypsum Company)
DEXcell Glass Mat Roof Board is a gypsum roof board with coated fiberglass facers on the face, back and sides and a mold- and moisture-resistant core, used as a substrate board, thermal barrier and cover board under mechanically attached and ballasted single-ply membranes and metal roofing; National Gypsum also recommends it under wood shakes. The submittal sheet prints 1/4, 1/2 and 5/8 inch (Type X) 4 by 8 foot boards, 900 psi compressive strength, 23 to 25 perms, flame spread 0 and smoke developed 0, a mold score of 10 (ASTM D3273), UL Class A to unlimited slope per UL 790, FM Class 1, compliance with FM 4450 and FM 4470, and manufacture to ASTM C1177.
7870 High-Solids Roofing Silicone (Neogard)
7870 is a single-component, moisture-cured, high-solids silicone roof coating (Hempel code 873JB) and the coating in Neogard's Silicone HS systems for smooth BUR and granulated cap sheet, concrete, metal, polyurethane foam and single-ply roofs, which the maker says can be warranted for up to 20 years and can handle ponding water. Its product data sheet lists 247 psi tensile strength (ASTM D412), 237 percent elongation (ASTM D2370), an SRI of 113 for the white, Class A flammability under ASTM E108, a VOC under 50 g/L and a 40-mil maximum per coat, and names Energy Star, a CRRC listing, a UL TGFU listing, Factory Mutual Class A and Miami-Dade NOA #18-0619.04. It comes in white (7870) and silicone gray (7871).
R-Panel Metal Roof Panel System (Nucor Building Systems)
Nucor R-Panel is a ribbed steel roof panel, 36 in. wide with ribs at 12 in. spacing and a 1-1/4 in. rib height, in 26 gauge (0.0177 in.) and 24 gauge (0.0222 in.) 80 ksi steel. It is typically applied over fiberglass batt or rigid board insulation and is available in Galvalume, SP and PVDF colors; a translucent R-Panel is offered in a standard 10 ft. 8 in. length. The data sheet lists ASTM E108 Class A, FM 4471 Class 1 approval, UL 580 Class 90 approval, State of Florida Product Approval and Miami-Dade approval.
Owens Corning DecoRidge Hip & Ridge Shingles (Owens Corning)
DecoRidge is Owens Corning's thick, bull-nosed hip and ridge shingle of heavyweight laminate with SBS-modified asphalt, which the data sheet describes as the thickest profile available and resistant to cracking even in cold weather. It is laid at an 8 in. exposure with 20 lineal ft. per carton. The data sheet lists a limited lifetime warranty (40 years on commercial projects), a 130 mph wind resistance limited warranty and a 25-year algae resistance limited warranty.
Owens Corning DuraRidge Hip & Ridge Shingles (Owens Corning)
DuraRidge is Owens Corning's high-profile, layered hip and ridge shingle colored to match the TruDefinition Duration series, and the maker describes it as the first hip and ridge shingle with its SureNail nailing technology. The data sheet gives a 12 in. piece laid at an 8 in. exposure, 30 shingles per bundle and 20 lineal ft. per carton, with StreakGuard algae protection. It lists a limited lifetime warranty when installed with Owens Corning laminate shingles, a 130 mph wind resistance limited warranty and a 25-year algae resistance limited warranty.
Owens Corning TruDefinition Duration COOL Plus (Owens Corning)
Solar-reflective architectural laminated shingle in the Duration series, designed with solar-reflecting granules that help decrease heat transfer into the home while providing bold color contrast and added dimension. Patented SureNail Technology and Tru-Bond sealant support a 130 mph limited wind- resistance warranty with standard installation. Meets California Title 24, Part 6 cool roof requirements, the Los Angeles County Green Building Standards Code, and the City of Los Angeles Cool Roofs Ordinance. Owens Corning's data sheet lists "ASTM E108/UL 790 (Class A Fire Resistance)".
Owens Corning TruDefinition Duration Designer (Owens Corning)
Laminated architectural shingle in the Duration Series offering the Designer Color Collection of bold, high-contrast color blends, built with Owens Corning's patented SureNail Technology reinforced nailing strip. Carries UL 2218 Class 3 impact resistance and algae resistance coverage.
Owens Corning TruDefinition Duration FLEX (Owens Corning)
An SBS polymer-modified impact-resistant architectural shingle that pairs Owens Corning's patented SureNail Technology nailing strip with a rubberized asphalt for a UL 2218 Class 4 impact rating and improved cold-weather tear strength.
Owens Corning TruDefinition Duration MAX (Owens Corning)
Heavyweight architectural laminated shingle in the Duration series that combines the bold, thick, high-profile appearance of a wood shingle with patented SureNail Technology, a woven engineered-fabric reinforced nailing zone with a triple-layer common bond area. SureNail's grip supports a 130 mph limited wind-resistance warranty with standard four-nail installation, and TruDefinition color technology delivers deep, vibrant color contrast.
Owens Corning Duration Premium (Owens Corning)
Laminated architectural shingle in the Duration Series with a thick, dimensional wood-shake-like appearance, built with Owens Corning's patented SureNail Technology reinforced nailing strip. Marketed as a heavyweight option suited to Homeowner Association (HOA) specs; carries UL 2218 Class 3 impact resistance. Distributed with limited availability, primarily in Western U.S. markets.
Owens Corning Duration STORM (Owens Corning)
The SBS-modified, impact-resistant version of Owens Corning's Duration architectural shingle, combining the SureNail Technology nailing strip with a rubberized asphalt that passes the UL 2218 Class 4 impact test.
Owens Corning TruDefinition Duration (Owens Corning)
Owens Corning's flagship laminated architectural shingle with the SureNail Technology reinforced nailing strip for improved wind resistance and fastener holding.
Owens Corning Oakridge (Owens Corning)
Owens Corning's entry architectural (laminate) shingle, offering a dimensional look at a value price. Rated to 110 mph with standard four-nail application and to 130 mph with six nails plus Owens Corning starter shingles.
Owens Corning ProEdge Hip & Ridge Shingles (Owens Corning)
ProEdge is Owens Corning's hip and ridge shingle designed to pair with Duration and Oakridge laminate shingles, built to bend over the ridge, laid at a 6 in. exposure with 33 lineal ft. per bundle and StreakGuard algae protection. The October 2025 data sheet lists UL 2218 and FM 4473 Class 3 impact resistance and a limited lifetime warranty with a 110/130 mph wind resistance limited warranty: 110 mph is standard with 4-nail application, and 130 mph applies only with 6-nail application and Owens Corning starter shingles along eaves and rakes. Owens Corning states the impact test result does not guarantee the shingle will resist all weather, and hail damage is excluded from warranty coverage.
Owens Corning RIZERidge Hip & Ridge Shingles (Owens Corning)
RIZERidge is a high-profile hip and ridge shingle that Owens Corning offers as an alternative to cut 3-tab shingles, colour-coordinated with its TruDefinition Duration shingles. The data sheet gives a 12 in. x 36 in. nominal shingle that separates into 12 in. x 12 in. pieces at a 6 in. exposure, 22 shingles (66 pieces) and 33 lineal feet of coverage per bundle. It lists ASTM D3462, ASTM D228, ASTM D3018 Type 1, ICC-ES AC438, ASTM D3161 Class F wind resistance, ASTM E108/UL 790 Class A fire resistance and PRI ER 1378E01. Owens Corning states a limited lifetime warranty when installed with its laminate shingles, a 130-MPH wind resistance limited warranty and a 25-year algae resistance limited warranty (StreakGuard), each subject to the actual warranty terms.
Owens Corning Starter Strip Plus (Owens Corning)
Starter Strip Plus is Owens Corning's precut starter shingle, packaged two pieces per shingle with a center perforation for separation, 16 shingles and 105 lineal ft. per bundle, giving a machine-cut straight edge at eaves and rakes without cutting tabs or headlap. Owens Corning states the extra-wide starter can be used with most shingles having an exposure of up to 6 in.
Owens Corning Supreme (Owens Corning)
Owens Corning's entry-level three-tab asphalt shingle, positioned as a basic, economical choice balancing weather resistance and value, with 10-year algae resistance coverage and a 25-year limited warranty.
Owens Corning Woodcrest (Owens Corning)
Thick premium architectural shingle with a rustic, textured appearance designed to create the look of wood shake without the maintenance. Certified to UL 2218 Class 4 impact resistance and carries 25-year algae resistance coverage.
Owens Corning Woodmoor (Owens Corning)
Premium architectural shingle that resembles wood shake with greater durability and less maintenance, thicker and heavier than Woodcrest with more dramatic layered detailing. Certified to UL 2218 Class 4 impact resistance and carries 25-year algae resistance coverage.
Owens Corning WoodStart Starter Strip Shingle (Owens Corning)
WoodStart is Owens Corning's laminated two-ply starter strip shingle made to match Woodcrest and Woodmoor shingles in color and profile. Its January 2026 data sheet gives a 40 in. x 13 3/8 in. piece, 16 pieces and 53.33 lineal ft. per bundle, a nailing area about 1.5 in. wide, and a continuous sealant strip that bonds the starter to the first course at the eave; Owens Corning says one piece meets the ply requirement where other makers call for two, and that it can also be run up valleys as a bleeder strip. The sheet states WoodStart is laboratory-classified as a UL 2218 Class 4 impact-resistant shingle, that the result does not guarantee it will resist all weather, and that hail damage is excluded from its warranty.
Cascade (PABCO Roofing Products)
PABCO's distinctive diamond-shaped signature cut shingle designed for historical-style homes, with a shape that accentuates steeply sloped roofs with vintage aesthetic appeal. Rated UL 790 Class A for fire resistance and 110 mph standard / 130 mph high-wind-application wind resistance, offered in three color options. No impact class is stated on the product page, so none is recorded here.
Paramount Advantage (PABCO Roofing Products)
Paramount Advantage is a heavyweight, open-tooth architectural shingle in PABCO's Signature Cut line, positioned above Paramount at a nominal 483 pounds per square. It is rated UL 790 / ASTM E108 Class A for fire resistance, UL 2218 Class 4 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
Paramount (PABCO Roofing Products)
Paramount is PABCO's original signature-cut, open-tooth architectural shingle and the founding product of the Signature Cut line, a laminated fiberglass shingle at a nominal 349 pounds per square. It is rated UL 790 / ASTM E108 Class A for fire resistance, UL 2218 Class 4 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
Premier Radiance (PABCO Roofing Products)
PABCO's solar-reflective laminated architectural shingle, infused with solar-reflective granules that reflect heat-producing ultraviolet rays back into the atmosphere, which may reduce heat transfer into the home. Rated UL 790 Class A for fire resistance, UL 2218 Class 3 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, offered in four Cool color options.
PABCO Premier (PABCO Roofing Products)
PABCO Premier is a laminated architectural shingle built on a heavyweight fiberglass mat saturated with asphalt and surfaced with mineral granules, offered in 8 color options. It is rated UL 790 Class A for fire resistance, UL 2218 Class 3 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
PABCO Prestige (PABCO Roofing Products)
PABCO Prestige is a heavyweight, laminated architectural shingle built on a fiberglass mat saturated with asphalt and surfaced with mineral granules, designed for custom homes, commercial steep-slope installations, and demanding environments. It is rated UL 2218 Class 4 for impact resistance, UL 790 Class A for fire resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
Petersen PAC-CLAD Snap-Clad (Petersen Aluminum)
Petersen's architectural snap-together standing seam metal roof panel, offered in .032 and .040 aluminum and 22/24 gauge steel with a 1-3/4-inch seam. Tested to ASTM E1592 and UL 580 Class 90 wind uplift and finished in a Kynar 500 PVDF coating backed by a 30-year finish warranty.
4700 HFO Series Spray Polyurethane Foam (Progressive Materials)
4700 HFO is a two-component, 1 to 1 by volume, 3 pound density spray polyurethane foam for roofing systems, formulated without HFCs. Its data sheet lists an R-value of 6.2 per inch (ASTM C518), 3 pcf core density, 55 psi compressive strength and a UL 790 Class A building code entry, with a maximum lift of 1.5 inches per pass. It is offered in fast, regular and slow speeds for different ambient temperature ranges.
Pro Eco-Sil HS 3200 Series (Progressive Materials)
HS 3200 Series is a one-component, moisture-curing, solvent-free high solids silicone rubber roof coating for existing smooth surface BUR, granulated cap sheet, acrylic coatings, concrete, metal, spray polyurethane foam and single-ply membranes. Its data sheet lists 92 percent solids by weight, VOC under 50 grams per liter, single-coat application above 40 mils, an ASTM E108 Class A flame spread entry, and an initial SRI of 113 for HS 3201 white, which the Cool Roof Rating Council also lists. The line includes the HS 3200-HB roller grade, applied above 70 mils per coat in 5 gallon containers, and HS 3200-HB BX with additives to deter wildlife damage; the standard grade is sold in five colors in 5 and 55 gallon containers. HS 3200 and HS 3200 HB are accepted under Miami-Dade NOA 25-1118.01 to ASTM D6694 and hold FM Approvals Class 4470 approval as an optional coating over existing FM Approved roof covers. Full system limited warranties of 5 to 20 years are available through the maker's roofing specialists.
Pro Poly-Sil LS 2200 Series (Progressive Materials)
LS 2200 Series is a one-component, moisture-curing, solvent-based silicone rubber roof coating designed for use on sprayed-in-place polyurethane foam. Its data sheet lists 82 percent solids by weight, 70 percent by volume, VOC under 250 grams per liter, a cure time of 1 to 3 hours, and an ASTM E108 Class A flame spread entry, and it is sold in white, tan, light gray, dark gray and black in 5 and 50 gallon containers. Miami-Dade NOA 25-1118.01 accepts it as a roof maintenance coating to ASTM D6694, and the Cool Roof Rating Council lists LS-2201 white at an initial SRI of 110. The maker offers full system limited warranties of 5 to 20 years through its roofing specialists.
PG 700 Pro-Grip Walkway Coating (Progressive Materials)
PG 700 Pro-Grip is a safety yellow, one-component, moisture-curing silicone coating that forms a non-skid walkway when broadcast with PG 750 walkway granules, and is also used to add impact resistance to roof areas. Walkways take 25 mils with 40 pounds of granules per square and impact areas 40 mils with 60 pounds per square, applied by roller. Its data sheet lists 92 percent solids by volume, VOC under 50 grams per liter and an ASTM E108 Class A flame spread entry.
Barrel Tile Metal Roofing (ProVia)
ProVia's barrel tile metal roofing is a stamped steel panel shaped and printed to look like Spanish clay barrel tile, with a 5/8 in. reveal, in Terracotta, Auburn, Mocha and Jade with coordinating trim accents. The brochure says it is certified to Florida HVHZ standards and lists Miami-Dade NOA# 24-0124.02 for barrel tile. It is embossed 26-gauge G90 galvanized steel with the GalvaTec finish (Fluropon Kynar 500 base color, decorative ink and clear coat, with an epoxy back coat) and concealed fasteners. The brochure's standards table lists UL 2218 Class 4 impact, ASTM E108 Class A fire, wind uplift of TAS 125 Class 90, TAS 125 Class 60 and UL 580 Class 30 on separate rows without saying which product each applies to, and passes for ASTM B117, ASTM G-155, TAS 100-95 wind-driven rain, ANSI-FM4470 (2016) foot traffic and ASTM E8/E8M-16a. The warranty is a lifetime non-prorated material warranty for the original homeowner, transferable, with a 40-year chalk and fade guarantee.
Shake Metal Roofing (ProVia)
ProVia's shake metal roofing is a stamped steel panel printed and embossed to look like split cedar shake, in Briarwood, Saddlewood, Pepperwood, Shadewood and Bronzewood colors with solid or decorative trim. Shake and slate panels use a four-way multi-point locking system with a water-damming feature and reverse-side WaveLock design that the brochure says resisted wind uplift to 180 mph. It lists Florida HVHZ approval FL# 37381 for shake. It is embossed 26-gauge G90 galvanized steel with the GalvaTec finish (Fluropon Kynar 500 base color, decorative ink and clear coat, with an epoxy back coat) and concealed fasteners. The brochure's standards table lists UL 2218 Class 4 impact, ASTM E108 Class A fire, wind uplift of TAS 125 Class 90, TAS 125 Class 60 and UL 580 Class 30 on separate rows without saying which product each applies to, and passes for ASTM B117, ASTM G-155, TAS 100-95 wind-driven rain, ANSI-FM4470 (2016) foot traffic and ASTM E8/E8M-16a. The warranty is a lifetime non-prorated material warranty for the original homeowner, transferable, with a 40-year chalk and fade guarantee.
Slate Metal Roofing (ProVia)
ProVia's slate metal roofing is a stamped steel panel printed and embossed to look like quarried slate, in Coalstone, Larkstone, Lodgestone, Ironstone and Baystone colors with solid or decorative trim. Shake and slate panels use a four-way multi-point locking system with a water-damming feature and reverse-side WaveLock design that the brochure says resisted wind uplift to 180 mph. It lists Florida HVHZ approval FL# 37870 for slate. It is embossed 26-gauge G90 galvanized steel with the GalvaTec finish (Fluropon Kynar 500 base color, decorative ink and clear coat, with an epoxy back coat) and concealed fasteners. The brochure's standards table lists UL 2218 Class 4 impact, ASTM E108 Class A fire, wind uplift of TAS 125 Class 90, TAS 125 Class 60 and UL 580 Class 30 on separate rows without saying which product each applies to, and passes for ASTM B117, ASTM G-155, TAS 100-95 wind-driven rain, ANSI-FM4470 (2016) foot traffic and ASTM E8/E8M-16a. The warranty is a lifetime non-prorated material warranty for the original homeowner, transferable, with a 40-year chalk and fade guarantee.
Sikalastic-621 TC (Sika Sarnafil)
Sikalastic-621 TC is a cold-applied, single-component, aliphatic, moisture-triggered polyurethane resin used as the embedment, saturating and top coat resin of the Sikalastic-621 roofing system, reinforced with fiberglass mat or polyester fleece to form a seamless membrane and flashing. It ships in 5 gal (19 L) pails. Its data sheet lists ASTM E108 and ASTM C836, prints a Class A ASTM E108 external fire result, and reports a solar reflectance of 0.85 and an SRI of 108 for white.
Sikalastic-624 WP (Sika Sarnafil)
Sikalastic-624 WP is a cold-applied, single-component, alkaline-resistant, aliphatic, moisture-triggered polyurethane resin used with fiberglass mat or polyester fleece reinforcement to form a seamless membrane and flashing system. It is typically covered by a separate wearing course but is UV resistant without a protection board. It ships in 5 gal (19 L) pails. Its data sheet lists Miami-Dade County and ASTM C836, prints a Class A ASTM E108 external fire result, and reports an SRI of 109 for white.
Sikalastic-641 Lo-VOC (Sika Sarnafil)
Sikalastic-641 Lo-VOC is a cold-applied, single-component, aliphatic, low-VOC, moisture-triggered polyurethane resin used as the embedment, saturating and top coat resin of the Sikalastic-641 Lo-VOC roofing system, reinforced with fiberglass mat or polyester fleece. It ships in 5 gal (19 L) pails. Its data sheet lists Miami-Dade, UL 790 Class A, ASTM E108, ASTM C836, FM Approval Standard 4470 for Class 1 roof covers, CRRC and ICC-ES ESR-4509, and reports an SRI of 108 for white.
Sikalastic-644 Lo-VOC (Sika Sarnafil)
Sikalastic-644 Lo-VOC is a cold-applied, low-odor, alkali-resistant, aliphatic, single-component, moisture- triggered polyurethane resin used with fiberglass mat or polyester fleece to form a seamless membrane and flashing system, typically under a separate wearing course and UV resistant without one. It ships in 5 gal (19 L) pails. Its data sheet lists Miami-Dade, Florida Building Code, UL 790 Class A, ASTM D6083 and CRRC, and reports an SRI of 110 for white.
SikaShield E54 PE (Sika Sarnafil)
SikaShield E54 PE is an SBS-modified bituminous base or intermediate ply reinforced with a non-woven polyester fabric stabilized with fiberglass, with a smooth top surface and a polyethylene burn-off film underside for torch application. The 3 mm product is 118 mil (3.0 mm) thick in 39.4 in by 32.8 ft rolls, and the maker also lists a 2.2 mm version. Its data sheet states it meets ASTM D6163 Type I Grade S, lists UL and FM Global, and prints a Class A UL 790 external fire result. Sika provides a building-owner warranty only on roofs installed by a Sika Authorized Applicator.
SikaShield E54 SF (Sika Sarnafil)
SikaShield E54 SF is an SBS-modified bituminous base or intermediate ply reinforced with a non-woven polyester fabric stabilized with fiberglass, with a sand top surface and a non-woven polypropylene fabric underside for cold or hot application. The 3 mm product is 118 mil (3.0 mm) thick in 39.4 in by 32.8 ft rolls, and the maker also lists a 2.2 mm version. Its data sheet states it meets ASTM D6163 Type I Grade S, lists UL and FM Global, and prints a Class A UL 790 external fire result.
SikaShield E65 MG FR 4 mm (Sika Sarnafil)
SikaShield E65 MG FR 4 mm is a 160 mil (4.0 mm) SBS-modified bituminous cap sheet reinforced with a non- woven polyester fabric stabilized with fiberglass, with a mineral-granule top surface for permanent UV exposure and a polyethylene burn-off film underside. It is used on flat or sloped roofs up to 15 percent gradient, can be installed by torch, mop, cold adhesive or mechanical fixation, and ships in 39.4 in by 32.8 ft rolls with regular white, bright white and Pure-Air granules. Its data sheet states it meets ASTM D6162 Type I Grade G, lists UL and FM Global, and prints a Class A UL 790 external fire result.
SikaShield HB79 MG 4 mm (Sika Sarnafil)
SikaShield HB79 MG 4 mm is a 160 mil (4.0 mm) two-layer modified bituminous cap sheet with an APAO-modified upper layer and an SBS-modified under layer, reinforced with a fiberglass mat between two non-woven polyester fabrics, with a mineral-granule top surface and a polyethylene burn-off film underside for torch application. It is used on flat or sloped roofs up to 15 percent gradient and on balconies and terraces, in 39.4 in by 32.8 ft rolls. Its data sheet states it meets ASTM D6163 Type I Grade G, lists UL, FM Global and CRRC, prints a Class A UL 790 external fire result, and reports an FM Global hail result of class SH.
SikaShield HB79 MGF 4 mm (Sika Sarnafil)
SikaShield HB79 MGF 4 mm is a 160 mil (4.0 mm) two-layer modified bituminous cap sheet with an APAO-modified upper layer and an SBS-modified under layer, reinforced with a fiberglass mat between two non-woven polyester fabrics, with a mineral-granule top surface and a non-woven polypropylene fabric underside. It is used on flat or sloped roofs up to 15 percent gradient, in 39.4 in by 32.8 ft rolls. Its data sheet states it meets ASTM D6163 Type I Grade G, lists UL, FM Global and CRRC, prints a Class A UL 790 external fire result, and reports an FM Global hail result of class SH.
Super Therm (Superior Products International II, Inc.)
Super Therm is a water-borne coating of aliphatic acrylics, self-crosslinking resins and four ceramic compounds, used as a one-coat exterior system on roofs and side walls, as a topcoat over metal roofs or as an intermediate coat on flat roofs. The technical data sheet (3/12/26) gives 91 sq ft per gallon at 18 mils wet, 10 mils dry, with a minimum of 18 mils wet per coat, and calls for modified bitumen, asphalt, PVC and TPO roofs to be primed first. Its listed tests include ASTM E84 flame spread, adhesion to ASTM D4541, perm rating to ASTM D1653, abrasion to ASTM D4060, flexibility to ASTM E1737, wind-driven rain to ASTM D6904 and MIL-PRF-6799L, and it prints a Class A flame spread result to ASTM E108.
TAMKO Elite Glass-Seal (TAMKO Building Products)
TAMKO's self-sealing traditional 3-tab fiberglass asphalt shingle, made from a fiberglass mat coated on both sides with weathering-grade asphalt and surfaced with ceramic granules. Positioned as an affordable, classic three-tab option. Shingle size 12 1/4 in x 36 in with a 5 1/8 in exposure.
TAMKO Heritage Designer Ridge (TAMKO Building Products)
Heritage Designer Ridge is TAMKO's high-profile hip and ridge shingle made with SBS modified bitumen, which TAMKO says is up to 1/2 in. thicker than standard Heritage Hip & Ridge, self-sealing and laid at an 8 in. exposure, in colors that complement Heritage, StormFighter IR and Titan XT shingles. The accessories page gives a 10 in. width, while the data sheet gives an 8 in. x 11-1/2 in. shingle size with 20 linear ft. per carton. TAMKO states it is covered by the TAMKO limited warranty for the TAMKO shingles covering the field of the roof.
TAMKO Heritage (TAMKO Building Products)
TAMKO's flagship laminated architectural shingle with a random-cut sawtooth design and Titan Seal self-sealing adhesive.
TAMKO 12-1/4" x 12" Hip & Ridge (TAMKO Building Products)
TAMKO's 12-1/4 in. x 12 in. Hip & Ridge is a precut hip and ridge shingle, a 12-1/4 in. x 36 in. shingle scored into three pieces and laid at a 5-1/8 in. exposure, made with the same fiberglass mat and granule blends as Heritage and Proline shingles, with a factory-applied sealant strip. It is for use with TAMKO 3-tab, architectural and UL 2218 Class 3 impact-rated shingles, and TAMKO states it is classified by UL for compliance with UL 2218 Class 3 impact resistance, noting that the dropped-steel-ball test may not correlate with real-world hail. The limited warranty covering the field shingles extends to it.
TAMKO Proline 12-1/4" x 12" Hip & Ridge (TAMKO Building Products)
Proline 12-1/4 in. x 12 in. Hip & Ridge is TAMKO's impact-rated hip and ridge shingle, with a polyester mat on its underside, scored into 12-1/4 in. x 12 in. pieces laid at a 5-1/8 in. exposure, 26 shingles and 33.31 linear ft. per bundle. TAMKO states it is classified by UL for compliance with UL 2218 Class 4 impact resistance and notes the test may not correlate with real-world hail. TAMKO's own copy differs on use: the accessories page says it must be used with StormFighter FLEX shingles, while the data sheet says it is for use with all TAMKO UL 2218 Class 3 or Class 4 impact-rated shingles; the page also lists ASTM D7158 Class H, which the data sheet does not. The field-shingle limited warranty extends to it.
TAMKO StormFighter FLEX (TAMKO Building Products)
TAMKO's polymer-modified impact-rated laminated shingle. Double-layer laminated fiberglass mat construction with premium asphalt modified by ForceFX polymer technology, the Rapid Fire Zone expanded nailing zone, and the AnchorLock reinforced nail line that supports a 160 mph WindGUARD High Wind Limited Warranty. Classified by UL for UL 2218 Class 4 impact resistance, and installable at temperatures down to 25 F.
TAMKO Titan XT (TAMKO Building Products)
TAMKO's high-wind architectural shingle featuring TriShield technology and a reinforced AnchorLock nailing area, backed by an industry-first 160 mph wind warranty and a UL 2218 Class 3 impact classification.
BR-36 (Taylor Metal Products)
BR-36 is a through-fastened roof and wall panel with 36 inch net coverage for commercial, industrial and architectural buildings, produced in Salem, Oregon and Sacramento and Riverside, California. It is made in 24 and 22 gauge steel and .032 and .040 inch aluminum, with heavier custom gauges on request, in 3 foot to 20 foot 10 inch lengths, spans up to 5 feet, and has a 1:12 minimum pitch recommended when installed with butyl sealant. The product page cites ICC-ES ESR-5045 and ESR-5046 and UL Evaluation Report ER25913-01, lists UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact ratings, and states a 40-year residential paint warranty on the Kynar 500 finish.
Cladding Series (Taylor Metal Products)
The Cladding Series is a family of architectural exposed-fastener panels produced in Salem, Oregon and Riverside and Sacramento, California, in profiles TMP 1-6-36 and TMP 1-8-40 for roof or wall use, plus a wall profile, TMP .625-7.33-44. They are made in 24 gauge Kynar 500 painted steel, .032 inch aluminum, bare Zincalume Plus, Rusteel Plus and copper, in 2 foot to 20 foot 10 inch lengths, with a 3:12 minimum pitch recommended when installed with butyl sealant. The series page lists UL 790 Class A fire and UL 2218 Class 4 impact ratings with ASTM air and water infiltration testing.
Classic 7/8 inch Corrugated (Taylor Metal Products)
Classic 7/8 inch Corrugated is an exposed-fastener roof and wall panel with 32-inch coverage and a 7/8-inch corrugation, which Taylor Metal describes as producing deep shadow lines for siding or roofing. The Salem-produced version comes in 26 gauge ArmorTech steel, 24 and 22 gauge Kynar 500 painted steel, .032 and .040 inch aluminum, bare Zincalume Plus, 22 gauge Rusteel Plus, and custom heavier gauges, in 1 to 45 foot lengths, with a 1:12 minimum pitch recommended when installed with butyl sealant. The page cites ICC-ES ESR-5045 and ESR-5046 and UL Evaluation Report ER25913-01, and states a limited lifetime Kynar residential paint warranty and a 40-year commercial paint warranty.
Easy-Lock (Taylor Metal Products)
Easy-Lock is a snap-together standing seam panel with a patented no-siphon dry lock seam and a reversing feature that lets panels be installed in either direction from any starting point, with concealed fasteners on a pre-slotted flange. It has a 1-inch rib with a 3/8-inch flat top, 12 or 16 inch coverage, and 3 to 35 foot lengths, in 26, 24 and 22 gauge Kynar 500 painted steel, .032 inch aluminum, 16 and 20 oz copper, bare Zincalume Plus, or 22 gauge Rusteel Plus; the maker recommends a 3:12 minimum pitch. It is manufactured in Salem, OR, Auburn, WA, and Sacramento and Riverside, CA, and the page cites UL Evaluation Report ER25913-01 and UL Construction No. 529. The page's finish section states a limited lifetime residential paint warranty and a 40-year commercial paint warranty, while the warranty document the same page links is titled a 30 Year Finish and 25 Year Substrate Commercial Paint Warranty.
GR-7 (Taylor Metal Products)
GR-7 is a light-gauge through-fastened roof and wall panel with 36 inch coverage and an 11/16 inch vertical rib, produced in Salem, Oregon, for commercial, industrial and agricultural buildings. It is made in 29, 26, 24 and 22 gauge steel, .032 inch aluminum and Rusteel Plus, in 1 to 45 foot lengths, with a 3:12 minimum pitch recommended when installed with butyl sealant. The product page cites ICC-ES ESR-5045 and ESR-5046 and UL Evaluation Report ER25913-01, lists UL 790 Class A fire and UL 2218 Class 4 impact ratings and ASTM E455 shear and diaphragm testing, and states a 40-year residential paint warranty on the ArmorTech finish and a 40-year commercial paint warranty on Kynar 500.
HR-34 (Taylor Metal Products)
HR-34 is an exposed-fastener roof and wall panel with 34 inch net coverage for commercial, industrial and architectural buildings, produced in Salem, Oregon and Spokane, Washington, and separately in Riverside, California, each with its own product page and data sheet. It is made in 26 (Oregon and Washington only), 24 and 22 gauge steel and .032 inch aluminum, with heavier custom gauges on request, in 1 to 45 foot lengths, spans up to 6 feet, and has a 1:12 minimum pitch recommended when installed with butyl sealant. Both product pages cite ICC-ES ESR-5045 and ESR-5046 and UL Evaluation Report ER25913-01 and list UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact ratings.
Marion R Panel (Taylor Metal Products)
Marion R Panel is a through-fastened roof and wall panel produced in Salem, Oregon, with 36 inch coverage per its data sheet. It is made in 26, 24 and 22 gauge steel and .032 inch aluminum in 1 to 45 foot lengths, with a 1:12 minimum pitch recommended when installed with butyl sealant; perforated and matching fiberglass and polycarbonate panels are available. The product page cites UL Evaluation Report ER25913-01 and lists UL 790 Class A fire, UL 2218 Class 4 impact and UL 580 Class 90 wind uplift ratings with ASTM air, water and structural testing.
MaxRun-238 (Taylor Metal Products)
MaxRun-238 is a mechanically seamed standing seam roof panel with a 2-3/8 inch rib on a floating clip system, produced in Salem, Oregon and Sacramento and Riverside, California. It offers 12, 14, 16, 18 and 24 inch coverage and 1 to 60 foot lengths in 24 and 22 gauge Kynar 500 painted steel, aluminum, bare Zincalume Plus, Rusteel Plus, zinc or copper, with a 1/2:12 minimum pitch recommended and factory-injected butyl sealant available. The product page lists UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact testing along with ASTM E1514 and E1592 structural testing, and states a limited lifetime residential and a 40-year commercial paint warranty.
MS-100 (Taylor Metal Products)
MS-100 is a fully crimped mechanically seamed standing seam roof panel with a 1 inch rib and a factory-injected butyl seam on a floating clip system, produced in Salem, Oregon and Sacramento and Riverside, California. It offers 13, 17 and 21 inch coverage and lengths up to 60 feet in 24 and 22 gauge Kynar 500 painted steel, aluminum, bare Zincalume Plus, Rusteel Plus, zinc or copper, with a 1:12 minimum pitch recommended. The product page cites ICC-ES ESR-5046 and UL Evaluation Report ER25913-01, lists UL Construction Nos. 575 and 602 with UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact ratings, and states a limited lifetime residential and a 40-year commercial paint warranty.
MS-150 (Taylor Metal Products)
MS-150 is a fully crimped mechanically seamed standing seam roof panel with a 1-1/2 inch rib and a factory-injected butyl seam on a floating clip system, produced in Salem, Oregon, Spokane, Washington and Riverside and Sacramento, California. It offers 12, 16 and 20 inch coverage and lengths up to 60 feet in 26, 24 and 22 gauge Kynar 500 painted steel, bare Zincalume Plus, .032 inch aluminum, zinc or copper, with a 1:12 minimum pitch recommended. The product page cites ICC-ES ESR-5046 and UL Evaluation Report ER25913-01, lists UL Construction Nos. 554, 588, 603, 604 and 605 with UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact ratings, and states a limited lifetime residential and a 40-year commercial paint warranty.
MS-200 (Taylor Metal Products)
MS-200 is a fully crimped mechanically seamed standing seam roof panel for low-slope roofs, with a 2 inch rib and factory-injected butyl sealant on a floating clip system, produced in Salem, Oregon and Riverside and Sacramento, California. It offers 12, 14, 16 and 18 inch coverage and lengths up to 60 feet in 26, 24 and 22 gauge Kynar 500 painted steel, bare Zincalume Plus, .032 inch aluminum, zinc or copper, with a 1/2:12 minimum pitch recommended; a curved version has its own data sheet. The product page cites ICC-ES ESR-5046, UL Evaluation Report ER25913-01 and FM Approvals Class 4471 (1-75/120 wind uplift), lists UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact ratings, and states a limited lifetime residential and a 40-year commercial paint warranty.
PBR (Taylor Metal Products)
Taylor Metal's PBR is a through-fastened roof and wall panel produced in Riverside, Salem and Spokane, in 26 gauge ArmorTech painted steel, 24 and 22 gauge Kynar 500 painted steel, .032 inch Kynar 500 painted aluminum, bare Zincalume Plus, or 22 gauge Rusteel Plus, in custom lengths of 1 to 45 feet. A 1:12 minimum pitch is recommended when installed with butyl sealant. The page cites ICC-ES ESR-5045 and ESR-5046 and UL Evaluation Report ER25913-01. It states a 40-year residential paint warranty on the ArmorTech SMP finish and 20 and 30 year commercial paint warranties on Kynar 500, with warranty specifications on request.
Rolled Rib (Taylor Metal Products)
Rolled Rib is a low-profile exposed-fastener roof and wall panel produced in Spokane, Washington, which the maker describes as similar to Tuff Rib, with 36 inch coverage and a 3/4 inch vertical rib. It is made in 29 gauge steel, with 26 gauge on request, in 1 to 45 foot lengths, with a 3:12 minimum pitch recommended when installed with butyl sealant; perforated and matching fiberglass and polycarbonate panels are available. The product page lists UL 790 Class A fire and UL 2218 Class 4 impact ratings with ASTM air, water and structural testing.
Slim-Lock (Taylor Metal Products)
Slim-Lock is a 1-1/2 inch rib standing seam panel on a floating clip system that allows very long panels without laps, produced in Salem, Oregon, in 12, 16 and 20 inch nominal coverages (20 inch in 24 gauge only) and 3 to 60 foot lengths. It is offered in 24 and 22 gauge Kynar 500 painted steel, bare Zincalume Plus, or 16 and 20 oz copper, with standard factory notching and a 3:12 recommended minimum pitch. The product page states that Slim-Lock carries its UL classifications under the Clip-Lock 150 (CA) profile designation, cites ICC-ES ESR-5046 and UL Evaluation Report ER25913-01, and states a limited lifetime residential paint warranty and a 40-year commercial paint warranty.
StreamLine (Taylor Metal Products)
StreamLine is a 16-inch-coverage standing seam panel with the same patented no-siphon dry lock seam and reversing install feature as Easy-Lock, a 1-inch vertical rib with a 3/8-inch flat top and concealed fasteners on a pre-slotted flange, offered in 26 gauge ArmorTech SMP painted steel or bare Zincalume Plus or G-90 galvanized. Standard lengths run 4 to 35 feet unnotched and 1 to 35 feet notched and tabbed, with a 3:12 minimum pitch recommended. The product page states that StreamLine carries its UL classifications under the Easy-Lock profile designation, and states a 40-year residential paint warranty for the ArmorTech finish.
T-3 (Taylor Metal Products)
T-3 is a light-gauge exposed-fastener roof and wall panel produced in Salem, Oregon, with 3/4 inch ribs at 9 inches on center and 36 inch net coverage. It is made in 29, 26, 24 and 22 gauge steel, .032 inch aluminum and Rusteel Plus, in 1 to 45 foot lengths, with a 3:12 minimum pitch recommended when installed with butyl sealant; matching fiberglass and polycarbonate panels are available. The product page cites UL Evaluation Report ER25913-01 and lists UL 790 Class A fire and UL 2218 Class 4 impact ratings with ASTM air, water and shear-diaphragm testing.
T-Panel (Taylor Metal Products)
T-Panel is a concealed-fastener batten-seam roof panel used with a separate narrow or wide batten on a clip system, for residential and commercial roofs including pre-curved radius areas down to a 3 foot radius. It offers 12 to 20 inch coverage and 2 to 60 foot custom lengths, in 24 and 22 gauge Kynar 500 painted steel, bare Zincalume Plus, .032 inch Kynar 500 aluminum and 16 or 20 oz copper. The product page cites ICC-ES ESR-5046 and UL Evaluation Report ER25913-01, and lists UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact ratings with either batten under UL Construction Nos. 344, 397 and 397A, plus ASTM E1646/E331 water and E1680/E283 air testing.
TR-7.2 (Taylor Metal Products)
TR-7.2 is an exposed-fastener roof and wall panel with 36 inch net coverage and a 1-1/2 inch vertical rib, produced in Salem, Oregon and Sacramento and Riverside, California. It is made in 24 and 22 gauge steel and .032 inch aluminum, with heavier custom gauges on request, in 3 foot to 20 foot 10 inch lengths, spans up to 6 feet, and has a 1:12 minimum pitch recommended when installed with butyl sealant. The product page cites ICC-ES ESR-5045 and ESR-5046, lists UL 580 Class 90 wind uplift, UL 790 Class A fire and UL 2218 Class 4 impact ratings, and states a 40-year residential paint warranty and 20 and 30 year commercial paint warranties.
Tuff Rib (Taylor Metal Products)
Tuff Rib is an economical, light-gauge, through-fastener roof and wall panel with 36-inch coverage and a 3/4-inch vertical rib, which Taylor Metal positions for commercial, industrial and agricultural work. It is made in Salem, OR and Riverside, CA, in 29 and 26 gauge ArmorTech SMP painted steel, bare Zincalume Plus or G-90 galvanized, and select .032 inch Kynar 500 aluminum colors, in custom lengths of 1 to 45 feet, with a 3:12 minimum pitch recommended when installed with butyl sealant. The page cites UL Evaluation Report ER25913-01 and states a 40-year residential paint warranty on the ArmorTech finish.
Ultra-Panel (Taylor Metal Products)
Ultra-Panel is an exposed-fastener roof and wall panel produced in Auburn, Washington, which the maker describes as similar to Tuff Rib, with 36 inch coverage, a 3/4 inch vertical rib and a positive side lap that acts as an anti-siphon so side lap tape and stitch screws are not needed. It is made in 29 gauge steel in 1 to 45 foot lengths, with a 3:12 minimum pitch recommended when installed with butyl sealant. The product page lists UL 790 Class A fire and UL 2218 Class 4 impact ratings with ASTM air, water, structural and shear-diaphragm testing.
Versa-Span (Taylor Metal Products)
Versa-Span is a long-length standing seam roof panel combining fluted steel pans with a lock-action rib and concealed fasteners on a floating clip system, which Taylor Metal states enables installation on low-pitched roofs. It has a 1-3/4 inch rib and 12, 14, 16 or 18 inch coverage, in 24 and 22 gauge Kynar 500 painted steel, .032 and .040 inch aluminum, bare Zincalume Plus, 22 gauge Rusteel Plus, or copper, with lengths up to 60 feet and on-site roll forming for longer panels; the maker recommends a 2:12 minimum pitch and offers a weathertightness warranty. The Salem-produced version cites ICC-ES ESR-5046 and UL Evaluation Report ER25913-01, and the page states a limited lifetime residential paint warranty and a 40-year commercial paint warranty.
Antica (Tilcor North America)
Antica is Tilcor's Mediterranean-style profile, combining the flowing curves of a Spanish clay tile with a pressure-formed, stone-coated steel panel. Each panel is 50 63/64 in. overall length by 14 3/8 in. width of cover, with 21 tiles per square and a weight of roughly 133 lb per square, installed at a minimum 3/12 roof pitch. It is covered under Tilcor North America's UL Evaluation Report ER38401-01, which lists it among the panel profiles tested for fire classification (ANSI/UL 790 / ASTM E108) and wind uplift resistance (ANSI/UL 1897, ANSI/UL 580) under ICC-ES Acceptance Criteria AC166, and under Texas Department of Insurance Product Evaluation RC-523 for wind load.
CF Shake (Tilcor North America)
CF Shake is Tilcor's deep-ribbed, stone-coated steel shake profile with a fully concealed fastening (CF) system, so screws are hidden from sight and the elements. Panels measure 52 5/8 in. overall length by 14 9/16 in. width of cover, 20 tiles per square, roughly 141 lb per square, installed at a minimum 3/12 roof pitch. Made with New Zealand steel. It is covered under Tilcor North America's UL Evaluation Report ER38401-01 (listed as "Shake CF") for fire classification (ANSI/UL 790 / ASTM E108) and wind uplift resistance (ANSI/UL 1897, ANSI/UL 580) under ICC-ES AC166, and under Texas Department of Insurance Product Evaluation RC-523 for wind load.
CF Shingle (Tilcor North America)
CF Shingle is Tilcor's low-profile, stone-coated steel shingle profile designed to resemble traditional asphalt shingles, with a fully concealed fastening (CF) system and a design that allows installation over an existing asphalt shingle roof. Panels measure 52 5/8 in. overall length by 14 9/16 in. width of cover, 20 tiles per square, roughly 141 lb per square, installed at a minimum 3/12 roof pitch. It is covered under Tilcor North America's UL Evaluation Report ER38401-01 (listed as "Shingle CF") for fire classification (ANSI/UL 790 / ASTM E108) and wind uplift resistance (ANSI/UL 1897, ANSI/UL 580) under ICC-ES AC166, and under Texas Department of Insurance Product Evaluation RC-523 for wind load.
Craftsman Shake (Tilcor North America)
Craftsman Shake is Tilcor's textured, stone-coated steel tile with a deep-ribbed profile designed to enhance shadow lines and replicate traditional wood shake. Panels measure 52 5/32 in. overall length by 14 1/2 in. width of cover, 20 tiles per square, roughly 128 lb per square, installed at a minimum 3/12 roof pitch. It is covered under Tilcor North America's UL Evaluation Report ER38401-01 for fire classification (ANSI/UL 790 / ASTM E108) and wind uplift resistance (ANSI/UL 1897, ANSI/UL 580) under ICC-ES AC166, has its own salt-spray corrosion test report (ASTM B117) and is covered under Texas Department of Insurance Product Evaluation RC-523 for wind load.
US Tile Romano Pans (Westlake Royal Roofing Solutions)
A flat-bottomed clay pan in Westlake Royal's US Tile line for use with Mission or Monarch barrel tops to give a classical European look, offered in cool roof colors; the product page states it is not available in Texas and that it is Grade 1 tested and approved per ASTM C1167. The product page lists a Class A fire rating, a cool roof rating and a color fade limited warranty, and its FAQ states that US Tile products include a 50-year limited transferable warranty.
Securock Brand Cement Roof Board (USG Corporation)
Securock Cement Roof Board is a Portland cement roof board wrapped on both faces and the edges in polymer-coated glass-fiber mesh, used as a cover board under adhered or mechanically attached membranes (USG singles out liquid-applied membranes and cold mastic-modified bitumen) and as a parapet, fire or thermal barrier board; USG calls it the lightest 1/2 inch cement board in the industry. The submittal sheet prints Class A unlimited slope to UL790, flame spread 0 and smoke developed 0 (ASTM E84), a maximum 10 for mold resistance (ASTM D3273), FM approval to FM 4450 and FM 4470 with FM Class 1, manufacture to ASTM C1325, compressive strength above 1,000 psi (1/2 inch) and 1,250 psi (5/8 inch), 12-inch flute spannability, 5.84 perms and 2.4 to 3.0 lb per square foot. USG's warranty runs 2 years from installation.
Securock Brand Gypsum-Fiber Roof Board (USG Corporation)
Securock Gypsum-Fiber Roof Board is a facerless cover and recover board of gypsum and cellulose fibers with a uniform, water-resistant core, for low- slope roofs under built-up, fluid-applied, spray foam, metal, and polyester- reinforced single-ply or modified bitumen systems, adhered or mechanically attached; USG says it is made from 97 percent recycled material. The submittal sheet prints Class A to UL790 in 1/4, 3/8, 1/2 and 5/8 inch thicknesses, flame spread 5 and smoke developed 0 (ASTM E84), a maximum 10 for mold resistance (ASTM D3273), FM approval to FM 4450 and FM 4470 with FM Class 1, manufacture to ASTM C1278, 1,800 psi nominal compressive strength, 24 to 30 perms and 4 by 4 or 4 by 8 foot boards, with Type X compliance for the 5/8 inch panel. USG's warranty on the board runs 2 years from installation.
Securock Brand UltraLight Coated Glass-Mat Roof Board (USG Corporation)
Securock UltraLight Coated Glass-Mat Roof Board is the coated-mat version of USG's lightweight glass-mat gypsum roof board, made for adhered single-ply and modified bitumen systems where bond and low absorption matter, and also used as a fire and thermal barrier. The submittal sheet prints Class A unlimited slope to UL790 in 1/4, 1/2 and 5/8 inch thicknesses, flame spread 0 and smoke developed 0 (ASTM E84), a noncombustible core, FM approval to FM 4450 and FM 4470 with FM Class 1, manufacture to ASTM C1177, 700 to 1,000 psi nominal compressive strength and 4 by 4 or 4 by 8 foot boards. USG's coated glass-mat warranty runs 2 years from installation.
Securock Brand UltraLight Glass-Mat Roof Board (USG Corporation)
Securock UltraLight Glass-Mat Roof Board is a gypsum roof board with a treated, noncombustible core and glass-mat facers, aimed at cover-board use in mechanically attached single-ply systems and at fire and thermal barrier use; USG says the 1/2 and 5/8 inch boards are up to 18 percent lighter than competing glass-mat boards. The submittal sheet prints Class A unlimited slope to UL790 in 1/4, 1/2 and 5/8 inch thicknesses, flame spread 0 and smoke developed 0 (ASTM E84), FM approval to FM 4450 and FM 4470 with FM Class 1, manufacture to ASTM C1177, 700 to 1,000 psi nominal compressive strength, 16 to 18 perms, and 4 by 8 foot boards, with Type X compliance for 5/8 inch. USG's warranty runs 2 years from installation.
STRUCTO-CRETE Brand Structural Roof Deck Panels (USG Corporation)
STRUCTO-CRETE Structural Roof Deck Panels are 3/4 inch, 4 by 8 foot tongue- and-groove cementitious panels screwed to cold-formed steel, bar joists or wood framing at up to 48 inches on center as a noncombustible structural roof deck for low- and steep-slope roofs, canopies and balconies, taking roof membranes or shingles directly and forming 1- and 2-hour fire-rated roof-ceiling assemblies. The submittal sheet prints noncombustibility to ASTM E136, flame spread 0 and smoke developed 0 (ASTM E84), Class A to UL790, FM approval with FM Class 1, ICC-ES Evaluation Report ESR-1792, a 150 psf ultimate uniform load at 48 inches on center on steel framing, a 1641 plf shear diaphragm rating, UL designs P561, P562 and P573 and UL uplift listing TGIK.R25352, and warns the panels must not be left in service without a roof or weather-resistive covering.
Cotswold Stone Roof Tile (Vande Hey Raleigh)
A flat-profile concrete roof tile in the Cotswold Stone surface style of VHR's Flat tile line. Per IAPMO UES ER-790 (Section 4.3.1, "Flat"), the Flat concrete tile family -- offered in Cotswold Stone, Custom Brushed, Shake, and Slate styles -- is classified Type III, low profile, measures 15-3/8 in. long by 10-1/4 in. wide with a nominal 15/16 in. thickness at the tile nose, and weighs 8.1 lb. per tile nominal, translating to 9.9 psf installed with a 3 in. head lap. Installed per the report on minimum 15/32 in. plywood decking over 30 lb. felt with 1x2 wood battens and 2-1/2 in. screws with a 3 in. overlap, the assembly achieves an ASTM E108 Class A fire rating and the tile complies with ASTM C1492.
Custom Brushed Roof Tile (Vande Hey Raleigh)
A flat-profile concrete roof tile in the Custom Brushed surface style of VHR's Flat tile line. Per IAPMO UES ER-790 (Section 4.3.1, "Flat"), the Flat concrete tile family -- offered in Cotswold Stone, Custom Brushed, Shake, and Slate styles -- is classified Type III, low profile, measures 15-3/8 in. long by 10-1/4 in. wide with a nominal 15/16 in. thickness at the tile nose, and weighs 8.1 lb. per tile nominal, translating to 9.9 psf installed with a 3 in. head lap. Installed per the report on minimum 15/32 in. plywood decking over 30 lb. felt with 1x2 wood battens and 2-1/2 in. screws with a 3 in. overlap, the assembly achieves an ASTM E108 Class A fire rating and the tile complies with ASTM C1492.
High Barrel (La Casa) (Vande Hey Raleigh)
A one-piece, high-profile Spanish barrel concrete roof tile. Per IAPMO UES ER-790 (Section 4.3.3, "Spanish"), High Barrel is classified Type I, high profile, Grade 1, measures 17-1/4 in. long by 13 in. wide with a nominal 13/16 in. thickness at the tile nose, and weighs 11.2 lb. per tile nominal, translating to 9.75 psf installed with a 3 in. head lap. Installed per the report on minimum 15/32 in. plywood decking over 30 lb. felt with 1x2 wood battens and 2-1/2 in. screws with a 3 in. overlap, the assembly achieves an ASTM E108 Class A fire rating and the tile complies with ASTM C1492.
Riviera (Vande Hey Raleigh)
A semi-flat, beveled-surface concrete roof tile in a Mediterranean style, offered in Mediterranean and Spanish surface styles. Per IAPMO UES ER-790 (Section 4.3.2), Riviera is classified Type III, low profile, measures 15-3/8 in. long by 10-1/4 in. wide with a nominal 13/16 in. thickness at the tile nose, and weighs 7.1 lb. per tile nominal, translating to 9.0 psf installed with a 3 in. head lap. Installed per the report on minimum 15/32 in. plywood decking over 30 lb. felt with 1x2 wood battens and 2-1/2 in. screws with a 3 in. overlap, the assembly achieves an ASTM E108 Class A fire rating and the tile complies with ASTM C1492.
Shake Roof Tile (Vande Hey Raleigh)
A flat-profile concrete roof tile in the Shake surface style of VHR's Flat tile line. Per IAPMO UES ER-790 (Section 4.3.1, "Flat"), the Flat concrete tile family -- offered in Cotswold Stone, Custom Brushed, Shake, and Slate styles -- is classified Type III, low profile, measures 15-3/8 in. long by 10-1/4 in. wide with a nominal 15/16 in. thickness at the tile nose, and weighs 8.1 lb. per tile nominal, translating to 9.9 psf installed with a 3 in. head lap. Installed per the report on minimum 15/32 in. plywood decking over 30 lb. felt with 1x2 wood battens and 2-1/2 in. screws with a 3 in. overlap, the assembly achieves an ASTM E108 Class A fire rating and the tile complies with ASTM C1492.
Slate Roof Tile (Vande Hey Raleigh)
A flat-profile concrete roof tile in the Slate surface style of VHR's Flat tile line. Per IAPMO UES ER-790 (Section 4.3.1, "Flat"), the Flat concrete tile family -- offered in Cotswold Stone, Custom Brushed, Shake, and Slate styles -- is classified Type III, low profile, measures 15-3/8 in. long by 10-1/4 in. wide with a nominal 15/16 in. thickness at the tile nose, and weighs 8.1 lb. per tile nominal, translating to 9.9 psf installed with a 3 in. head lap. Installed per the report on minimum 15/32 in. plywood decking over 30 lb. felt with 1x2 wood battens and 2-1/2 in. screws with a 3 in. overlap, the assembly achieves an ASTM E108 Class A fire rating and the tile complies with ASTM C1492.
Versico VersiWeld TPO (Versico Roofing Systems)
Versico's thermoplastic polyolefin single-ply membrane for commercial low-slope roofs, heat-welded at the seams and available in reflective white for cool-roof performance.
WeatherBond X-Tenda Coat Acrylic Base Coat (WeatherBond)
A one-component, low-VOC, water-borne acrylic base coating for aged single-ply membranes such as Hypalon, PVC, TPO and EPDM, applied by spray, brush or roller and not used as a top coat. It is buff colored with a theoretical coverage of 66 square feet per gallon. The data bulletin reports properties against ASTM D6083 and lists a UL 790 Class A rating and FM 4470 Class 1 classification for fire, windstorm and hail.
WeatherBond X-Tenda Coat Acrylic Bleed Block Base Coat (WeatherBond)
A multi-purpose acrylic elastomeric coating for asphalt and metal roofing and other substrates, formulated to block bleed-through from asphaltic material and to resist oils and plasticizers, used to waterproof and restore existing roofs. It is applied by spray, brush or roller. The data bulletin says it exceeds several ASTM D6083 requirements, including tensile strength, elongation, wet adhesion and weatherability, and lists a UL 790 Class A rating and California Title 24.
WeatherBond X-Tenda Coat Acrylic Top Coat (WeatherBond)
An acrylic elastomeric roof coating for asphalt, single-ply, metal and concrete roofing systems, applied by spray, brush or roller above 50 degrees F, in bright white and tan. The data bulletin reports properties against ASTM D6083, lists a UL 790 Class A rating, CRRC ratings for white and tan and California Title 24, and gives a calculated SRI of 106 initial and 91 aged for bright white and 89 initial for tan.
WeatherBond X-Tenda Coat XTRA Silicone Roof Coating (WeatherBond)
A 100% silicone, solvent-free, one-component, moisture-curing roof coating at 93% solids by volume for smooth asphaltic BUR, smooth or granulated cap sheets, single-ply, well-adhered acrylic coatings, metal and concrete, which the bulletin says can be applied above 50 mils in one coat. A typical rate of 1.0 to 1.5 gallons per 100 square feet yields about 15 dry mils; it ships in 5 and 55 gallon containers. The bulletin lists ASTM E108/UL 790 Class A, an ASTM D7281 water leakage pass at 22 dry mils or more, FM approval, NSF rainwater- catchment listing, and an initial SRI of 110 (106 aged).
Western Colloid #720 ARC ElastaHyde (Western Colloid)
A water-based, 100% acrylic elastomeric reflective roof coating that the maker positions as the top coat for its Fluid Applied Reinforced Roofing systems and for existing sprayed polyurethane foam, conventional and modified built-up and metal roofs; reinforced with polyester fabric it forms a complete fluid-applied membrane. The technical bulletin says it meets ASTM D6083-97a and lists white initial solar reflectivity of 84%, thermal emittance of 89%, an SRI of 106 initial and 93 aged, and a dry-film Class A under U.L. 790 and ASTM E108. The product page names White, California Tan and Platinum Gray and a Quick Set (QS) formulation for damp or rainy conditions.
Western Colloid #770 AXP ElastaHyde (Western Colloid)
A water-based, 100% acrylic elastomeric base coat designed to adhere to smooth APP modified bitumen and other asphaltic surfaces and to resist ponding water, intended to be finished with #720 ARC or #790 AFC ElastaHyde rather than left as the top coat. With polyester reinforcement it forms a fluid-applied membrane, and the maker says the reinforced coating system is FM Approved. The technical bulletin lists white only, initial reflectivity of 83%, an SRI of 104, a dry Class A under U.L. 790 reinforced and non-reinforced and under ASTM E108, and says a 10 mil surface coat of #720 or #790 is needed to meet California Title 24. The product page headline reads "#770 ARC ElastaHyde" while its body copy calls the product "#770 AXP".