Home / Class 4 Impact-Resistant Roofing Products
Class 4 Impact-Resistant Roofing Products
Specific roofing products — not just material categories — rated UL 2218 Class 4, the highest impact rating. Real product lines you can spec or ask a supplier for by name.
Atlas Pinnacle Impact (Atlas Roofing Corporation)
Atlas's impact-resistant architectural shingle manufactured with proprietary polymer modified asphalt technology for superior hail resistance, rated UL 2218 and FM 4473 Class 4. Built on the wide-format HP42 platform (42-inch length, 6-inch exposure) with the Sweet Spot nailing area, double FASTAC sealant lines, 3M Smog-Reducing Granules, and 3M Scotchgard Protector against algae streaks. FORTIFIED Roof ready with wind coverage up to 130 mph.
Atlas StormMaster Shake (Atlas Roofing Corporation)
Atlas's impact-resistant shake-profile shingle built with Core4 SBS-enhanced polymer technology and a dual sealant nailing area, carrying a UL 2218 Class 4 impact rating and finished with 3M Scotchgard Protector against algae streaks.
Brava Cedar Shake (Brava Roof Tile)
Brava's composite cedar shake tile made from recycled polymer with the hand-split texture of real cedar, available in three widths and thicknesses from 5/8 inch to 7/8 inch. Class 4 impact rated and hail warrantied, available in Class A or Class C fire-rated configurations, tested to withstand winds up to 188 mph with nails (211 mph with high-wind screw installation), with a 50-year limited warranty.
Brava Flat Tile (Brava Roof Tile)
Brava's fourth composite roofing line, molded to create a concrete-tile style finish. Per QAI code evaluation report CERus-1014 (revision April 2025), field tile measures 17.5 by 13.75 inches at 2.7 pounds with a 14-inch installed exposure and an installed weight of 2.16 pounds per square foot (about 216 pounds per square) — the lightest of Brava's four profiles. Supplied in the Brava One formulation with designated fastener locators and a range of colors, it is UL 2218 Class 4 impact rated and approved for High Velocity Hurricane Zone use, with maximum allowable wind-uplift pressures of 109 psf (ring-shank nails) or 202 psf (#8 screws) per TAS 125. Unlike Brava's other lines, the only roof fire-classified assembly listed for Flat Tile in CERus-1014 is Class C (over Intertape Palisade synthetic underlayment) — no Class A assembly is listed for this profile. The line does not yet appear in bravarooftile.com's product navigation; the manufacturer's code evaluation report is its published source.
Brava Old World Slate (Brava Roof Tile)
Brava's composite slate tile made from recycled polymer with a full 1-inch profile, the thickest synthetic slate available, in 12-inch standard and 6/9/12-inch multi-width sizes at a fraction of natural slate's weight. Class 4 impact rated and hail warrantied, available in Class A or Class C fire ratings, tested to withstand winds up to 188 mph with nails (211 mph with high-wind screw installation), with a 50-year limited warranty.
Brava Spanish Barrel Tile (Brava Roof Tile)
Brava's lightweight composite barrel (Spanish) tile made from recycled materials, replicating traditional clay barrel tile without the structural support heavy clay requires. Field tile measures 13 by 16-1/2 inches at 2.9 pounds, with the system weighing 281 pounds per square. Available in Class A or Class C fire-rated versions and in standard, blended, and cool-roof colors, it is UL 2218 Class 4 impact rated per QAI code evaluation report CERus-1014 and tested to withstand winds up to 188 mph with nails (211 mph with high-wind screw installation), with a 50-year limited warranty.
CeDUR Synthetic Cedar Shakes (CeDUR)
CeDUR's lightweight synthetic cedar shakes made with polyurethane-based technology and molded from over 50 unique natural cedar molds, offered in Live Oak, Shiloh, Golden Cedar (Title 24 compliant), and Walden colors. Class 4 impact rated and standalone Class A fire rated, manufactured in the United States, and backed by a 50-year limited warranty.
CertainTeed Belmont (CertainTeed)
CertainTeed's luxury asphalt shingle that replicates the color and dimension of natural slate, rated UL 2218 Class 4 for impact resistance and equipped with StreakFighter algae resistance.
CertainTeed Carriage House (CertainTeed)
Super-heavyweight luxury asphalt shingle with cut-away corners and wide, dark shadow lines that create the look of scalloped-edge natural slate. Rated UL 2218 Class 4 for impact resistance with StreakFighter algae resistance.
CertainTeed Landmark ClimateFlex (CertainTeed)
Polymer-modified (rubberized) asphalt laminated shingle in the Landmark series with a UL 2218 Class 4 impact-resistance rating. ClimateFlex technology adds enhanced hail resistance, superior granule adhesion, and cold-weather pliability for low-temperature installation, plus StreakFighter algae resistance and the NailTrak nailing area.
CertainTeed Landmark Premium (CertainTeed)
Premium multi-layer laminated shingle in the Landmark series with a UL 2218 Class 4 impact-resistance rating, UL Class A fire resistance, StreakFighter algae resistance, and the NailTrak extra-wide nailing area. Carries a 15-year 110 mph wind-resistance warranty, upgradable to 160 mph with CertainTeed starter and hip-and-ridge accessories.
CertainTeed NorthGate ClimateFlex (CertainTeed)
An SBS-modified ("rubberized") asphalt architectural shingle engineered for cold-weather flexibility and hail resistance, carrying a UL 2218 Class 4 impact rating on a two-piece laminated fiberglass construction.
CertainTeed Presidential Shake IR (CertainTeed)
Impact-resistant version of CertainTeed's Presidential Shake luxury laminated shingle with a UL 2218 Class 4 impact-resistance rating. Multi-layer construction on a fiberglass base recreates the sculpted look of cedar shake, with NailTrak nailing guides, self-sealing adhesive strips, and StreakFighter algae-resistance technology backed by a 30-year algae-resistance warranty. Carries a 15-year 110 mph wind-resistance warranty, upgradable to 130 mph with CertainTeed starter and hip-and-ridge accessories, plus 10-year SureStart protection.
CertainTeed Presidential Shake TL (CertainTeed)
Luxury triple-layer laminated shingle in the Presidential series that replicates the look of cedar shakes. Features a fiberglass base with a triple-laminate design, UL 2218 Class 4 impact resistance, UL Class A fire resistance, StreakFighter algae resistance, and wind resistance up to 110 mph (upgradable to a 130 mph wind warranty with CertainTeed starter and hip-and-ridge accessories).
Country Manor Shake (Isaiah Industries)
Isaiah Industries' heavily formed aluminum roofing system styled after hand-split cedar shakes, press-formed from 0.019-inch-thick, 3105 alloy, H26 temper aluminum sheet complying with ASTM B209, finished with a PVDF (Kynar 500/Hylar 5000) topcoat over a corrosion-inhibiting primer. Panels have a nominal width of 14.6 inches and length of 48.4 inches, install at approximately 47 lbs per square, and each panel carries eight simulated shake patterns with butt thicknesses ranging from 3/8 inch to 1-1/8 inches. UL Product iQ lists Country Manor Shake as a Class 4 aluminum tile shingle under UL 2218, and ICC-ES ESR-1360 rates it a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
Great American Shake (Isaiah Industries)
An aluminum shake-profile metal roofing system sold under Isaiah Industries' Green American Home brand, of identical construction to Classic Metal Roofing Systems' Rustic Shingle: press-formed from 0.019-inch-thick, 3105 alloy, H26 temper aluminum sheet complying with ASTM B209, finished with a Kynar 500 PVDF resin-based topcoat with hI-R Heat Barrier coatings, and attached with a dedicated 4009 nailing clip. Panels install at approximately 44 lbs per square. UL Product iQ lists Great American Shake as a Class 4 aluminum tile shingle (and, in its steel version, a Class 4 steel tile shingle) under UL 2218, and ICC-ES ESR-1360 rates the aluminum version a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
Oxford Shingle (Isaiah Industries)
Isaiah Industries' aluminum slate-profile metal shingle, press-formed from 0.024-inch-thick, 3105 alloy, H27 temper aluminum sheet complying with ASTM B209, finished with a PVDF (Kynar 500/Hylar 5000) topcoat over a corrosion-inhibiting primer. Panels have a nominal width of 12.8 inches and length of 60.6 inches, install at approximately 40 pounds per square, and each panel carries eight simulated shingle patterns. UL Product iQ lists Oxford Shingle as a Class 4 aluminum tile shingle under UL 2218, and ICC-ES ESR-1360 rates it a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
Rustic Shingle (Isaiah Industries)
Isaiah Industries' aluminum shake-profile metal shingle, press-formed from 0.019-inch-thick, 3105 alloy, H26 temper aluminum sheet complying with ASTM B209, finished with a PVDF (Kynar 500/Hylar 5000) topcoat over a corrosion-inhibiting primer. Panels have a nominal width of 12.8 inches and length of 24.9 inches, install at approximately 44 lbs per square, and each panel carries four simulated shake patterns. UL Product iQ lists Rustic Shingle as a Class 4 aluminum tile shingle under UL 2218, and ICC-ES ESR-1360 rates it a Class A, B, or C fire-classified roof covering depending on the underlayment assembly used.
DaVinci Bellaforte Slate (DaVinci Roofscapes)
DaVinci Roofscapes' synthetic composite slate tile molded from a proprietary polymer resin, roughly 75% lighter than quarried slate so it installs on standard framing. Carries a UL Class A fire rating and a UL 2218 Class 4 impact rating with a 50-year limited lifetime warranty.
DaVinci Inspire Slate (DaVinci Roofscapes)
DaVinci Roofscapes' single-width composite slate tile, molded from natural slate with fine surface texture and a deckled edge. Each tile is roughly 12" wide by 18" long and about 1/4" thick, installed at 6" to 7.5" exposure, and is far lighter than quarried slate so it fits standard framing. Carries a UL Class A fire rating and a UL 2218 Class 4 impact rating, and is offered in a wide slate color range with custom multi-color blends.
DaVinci Multi-Width Slate (DaVinci Roofscapes)
DaVinci's flagship synthetic slate tile in varied widths for an authentic quarried-slate look, molded from engineered polymer and rated UL 2218 Class 4 for impact.
DaVinci Province Slate (DaVinci Roofscapes)
DaVinci's single-width composite slate tile that replicates traditional slate. Self-aligning single-width tiles allow quick installation; the tile is resistant to mold, algae, fire, pests, impact, and salt air, and does not curl, cup, or split. Class A fire and Class 4 impact rated, with Cool Roof colors available.
DaVinci Select Shake (DaVinci Roofscapes)
DaVinci's composite shake tile molded from real hand-split wood profiles. Available in 8-inch and 10-inch widths (the 10-inch pieces carry a simulated keyway for a multi-width look), 5/8-inch thick, installable at 9-inch or 10-inch exposure. Class A fire and Class 4 impact rated, resistant to fading, rotting, cracking, and pests.
DECRA Shake XD (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel that captures the rustic tones and architectural detail of hand-split wood shake. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Shake (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel that delivers the classic elegance and rich shadow lines of cedar shake with the endurance of stone-coated steel. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Shingle XD (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel with thick-cut edges that provide the dimensionality and deep shadow lines of traditional asphalt shingles, designed to last two to three times longer than asphalt. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Tile (Westlake Royal Roofing Solutions)
DECRA's stone-coated steel roofing panel that mimics the scalloped Mediterranean tile aesthetic in a lightweight steel system. Like all DECRA lines it carries a Class A fire rating and the highest UL 2218 Class 4 impact rating, is warranted against hailstones up to 2.5 inches and winds up to 120 mph, and is approved for High-Velocity Hurricane Zones. A Westlake Royal Roofing Solutions brand.
DECRA Villa Tile (Westlake Royal Roofing Solutions)
DECRA's barrel-profile stone-coated steel tile, a lightweight Mediterranean-style roof formed from 26-gauge steel with an adhered stone-granule finish. Class A fire, UL 2218 Class 4 impact, and warranted for winds up to 120 mph. A Westlake Royal Roofing Solutions brand.
EcoStar Concrete Flat Tile (EcoStar)
EcoStar Concrete Flat Tile is a simulated flat concrete roof tile made with up to 80% upcycled polymers, offering the sleek, modern look of real concrete at a fraction of the weight, with easier installation than natural concrete tile. The product line includes 12" wide tiles plus hip and ridge accessory tiles, 3/4" thick for an enhanced shadow line, with 10" and 9" exposure options for staggered or offset installation and a 22" tile length providing 2" headlap at 10" reveal / 4" headlap at 9" reveal. A polymer composite tile replicating a concrete flat tile profile, not actual concrete.
EcoStar Island Groove Clay (EcoStar)
EcoStar Island Groove Clay is a simulated clay roof tile made with up to 80% upcycled polymers, engineered to reproduce the rich texture and natural tone variation of handcrafted clay tile at up to 70% less weight than natural clay. The product line includes 12" wide tiles plus hip and ridge accessory tiles, 5/8" thick for an enhanced shadow line, with 10" and 9" exposure options for staggered or offset installation and a 22" tile length providing 2" headlap at 10" reveal / 4" headlap at 9" reveal. A polymer composite tile replicating a clay tile profile, not actual clay.
EcoStar Shake Tiles (EcoStar)
EcoStar's synthetic cedar shake tiles manufactured from up to 80% post-industrial recycled materials and molded from authentic cedar shakes, offered in a 3/8-inch-thick Traditional (standard shadow line) profile, a 3/4-inch-thick Niagara (enhanced shadow line) profile, and a varied shadow line Aspen Blend. UL 2218 Class 4 hail impact rated, UL 790 Class C or A fire rated, and wind rated per ASTM D3161 Class F (110 mph), with a 50-year limited material warranty (transferable labor-and-material coverage available).
EcoStar Slate Tiles (EcoStar)
EcoStar's synthetic slate tiles manufactured from upcycled materials, offered in a 1/4-inch-thick Traditional (standard shadow line) profile in multiple widths and designer shapes, and a 5/8-inch-thick Niagara (enhanced shadow line) profile in 10-, 12-, and 14-inch widths, including random-width blends. UL 2218 Class 4 hail impact rated, UL 790 Class C or A fire rated, and wind rated per ASTM D3161 Class F (110 mph), with a 50-year limited material warranty (transferable labor-and-material coverage available).
Beaumont Shake HP (Euroshield Roofing)
Euroshield's hail-proof, cedar-shake-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), with vertical grooves and grain texture styled to replicate hand-split cedar shake. Rated UL 2218 Class 4 for impact resistance and stated to withstand sustained wind gusts up to 170 mph, it ships as a 40 in. x 21 in. panel weighing approximately 265 lbs per square, in Black, Grey, Brown, and Driftwood. It carries Euroshield's Hail Proof Warranty against hail impact damage greater than 2 inches in diameter for the first 20 years, reverting to the standard Basic Hail Warranty (2 inches or less) for the remaining 30 years of the 50-year limited pro-rated warranty term.
Beaumont Shake (Euroshield Roofing)
Euroshield's shake-profile shingle made of recycled tire rubber (approximately 95% recycled material overall), providing a classic wood shake appearance without mold, excess moisture absorption, curling, warping, or cracking. The manufacturer describes it as lighter weight than its Ranchlands Shake while still supplying considerable strength and durability, sold at a price point between asphalt shingles and premium roofing products. Distinct from the hail-proof Beaumont Shake HP variant; like all Euroshield products it is warrantied for 50 years against hail of two inches or less in diameter. Euroshield's technical information page states all profiles are UL 2218 Class 4 listed impact rated, per QAI Code Evaluation Report Listing No. CERus-1013.
Ranchlands Shake (Euroshield Roofing)
Euroshield's heavyweight wood-shake-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), with deep shadow lines and long vertical graining styled to replicate real wood shake. Rated UL 2218 Class 4 for impact resistance, it ships as a 36 in. x 22.5 in. panel weighing approximately 310 lbs per square, in Black, Grey, Brown, and Driftwood. Like Rundle Slate, it carries Euroshield's standard Basic Hail Warranty (hail impact of 2 inches or less) for the full 50-year limited pro-rated warranty term, without the HP lines' any-size hail-proof provision.
Rundle Slate (Euroshield Roofing)
Euroshield's extra-thick, chiselled-edge slate-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), designed with coarse edge texturing and strong shadow lines to replicate hewn natural slate. Rated UL 2218 Class 4 for impact resistance, it ships as a 36 in. x 22.5 in. panel weighing approximately 360 lbs per square, in Black, Grey, Brown, and Driftwood. Unlike Euroshield's HP lines, Rundle Slate carries the standard Basic Hail Warranty (hail impact of 2 inches or less) for the full 50-year limited pro-rated warranty term, without an added any-size hail-proof provision.
Vermont Slate HP (Euroshield Roofing)
Euroshield's hail-proof, slate-profile shingle made of recycled tire rubber (approximately 70% recycled tire content, about 95% recycled material overall), styled to replicate the look of natural slate. Rated UL 2218 Class 4 for impact resistance, it ships as a 40 in. x 21 in. panel weighing approximately 265 lbs per square, in Black, Grey, Brown, and Driftwood. It carries Euroshield's Hail Proof Warranty against hail impact damage greater than 2 inches in diameter for the first 20 years, reverting to the standard Basic Hail Warranty (2 inches or less) for the remaining 30 years of the 50-year limited pro-rated warranty term.
Vermont Slate (Euroshield Roofing)
Euroshield's slate-profile shingle made of recycled tire rubber (approximately 95% recycled material overall), described by the manufacturer as its most realistic and refined slate style, delivering the look of premium slate without the weight or expense of real stone. Distinct from the hail-proof Vermont Slate HP variant: the standard Vermont Slate is covered by a hail damage warranty for hailstones two inches in diameter or less for 50 years, while the HP variant carries a 20-year any-size-hail guarantee. Euroshield's technical information page states all profiles are UL 2218 Class 4 listed impact rated, per QAI Code Evaluation Report Listing No. CERus-1013.
F-Wave REVIA Classic Slate (F-Wave)
F-Wave's slate-look synthetic shingle made from commercial-grade polymer, offered in three stone-inspired colors (Royal, Black, Gray). Class A fire-rated and 150-mph wind rated with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind damage, hail, algae, and color fading. F-Wave's resources page lists the REVIA line's standards passed as UL 2218 / FM 4473 Class 4 hail resistance, FM 4475 Very Severe Hail, ASTM D3161 Class F and D7158 Class H wind, and ASTM E108 / UL 790 Class A fire, under Intertek listing CCRR-0283.
F-Wave REVIA Designer Slate (F-Wave)
F-Wave's premium synthetic slate-look shingle made from commercial-grade polymer in tough single-piece construction with no granules, no asphalt, and no layers to delaminate. Offered in Estate Series and American Blends profiles. Class 4 hail rated with warranted hail coverage, Class A fire rated, and 150-mph wind rated with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind, hail, algae, and color fading.
F-Wave REVIA Hand-Split Shake (F-Wave)
F-Wave's synthetic hand-split shake shingle made from commercial-grade polymer in single-piece construction with no granules or asphalt, replicating rustic wood shake styling in colors such as Mountain Cedar and Lakeshore Gray. Carries a Class 4 hail warranty, Class A fire rating, and 150-mph wind rating with a 130-mph wind warranty, backed by the 50-Year WeatherForce Advantage Warranty covering wind, hail, algae, and color fading.
GAF Camelot II (GAF)
GAF's designer asphalt shingle with an artisan-crafted slate-like shape, oversized tabs, and a custom European-inspired color palette, offered at a fraction of the cost of traditional slate. Carries a UL 2218 Class 4 impact-resistance rating and GAF Time-Release Algae-Fighting Technology.
GAF Grand Sequoia AS (GAF)
The impact-resistant version of GAF's Grand Sequoia designer shingle, built with oversized tabs for a rugged wood-shake look and passing the UL 2218 Class 4 impact test.
GAF Grand Sequoia RS (GAF)
Cool-roof Lifetime Designer Shingle with a genuine wood-shake look, using EcoDark granules and an extra-large design with oversized tabs. Rated by the Cool Roof Rating Council, can be used to comply with California Title 24 cool roof requirements and the Los Angeles Green Building Code, and carries a UL 2218 Class 4 impact-resistance rating.
GAF LIBERTY SBS Self-Adhering Roofing System (GAF)
GAF's SBS-modified, self-adhering peel-and-stick roll roofing system for low-slope residential roof areas such as porches, garages, carports, and sheds. Installs without torches, open flames, or hot asphalt; the system comprises the LIBERTY Self-Adhering Cap Sheet and Base/Ply Sheet with LIBERTY Asphalt Primer and Flashing Cement accessories. When installed as a complete 2-ply system it passes UL 2218A Class 4 impact-resistance testing.
GAF Slateline (GAF)
GAF's designer asphalt shingle with bold shadow lines and tapered cut-outs that create the appearance of natural slate at a fraction of the cost. Carries a UL 2218 Class 4 impact-resistance rating and GAF Time-Release Algae-Fighting Technology.
GAF Timberline AS II (GAF)
GAF's SBS-modified, impact-resistant architectural shingle in the Timberline family, engineered with a rubberized asphalt for flexibility and passing the UL 2218 Class 4 impact test.
GAF Timberline UHDZ (GAF)
GAF's premium laminated architectural shingle built on the high-performance UltraMat fiberglass mat, combining the LayerLock/StrikeZone nailing design with a UL 2218 Class 4 impact rating and GAF's deepest shadow bands.
GAF Woodland (GAF)
Value Collection Lifetime Designer Shingle that recreates the look of hand-cut European shingles with artisan-crafted shapes, oversized tabs, and a dimensional design, at a fraction of the cost of slate or wood shakes. Carries a UL 2218 Class 4 impact-resistance rating and GAF's Advanced Protection Shingle Technology.
IKO Crowne Slate (IKO)
IKO's premium designer shingle that mimics the appeal of natural slate tiles, with a 10-inch exposure and a uniformly square profile. Two-layer laminated fiberglass construction (oxidized-asphalt lower shim with modified-asphalt upper "dragon's teeth") gives it a Class 4 impact resistance rating. Standard 110 mph wind resistance, upgradeable to 130 mph with IKO's high wind application.
IKO Nordic (IKO)
IKO's polymer-modified architectural shingle reinforced for flexibility and tear resistance, earning a UL 2218 Class 4 impact rating that acts like a shock absorber against hail.
Malarkey Dura-Seal AR (Malarkey Roofing Products)
Malarkey's traditional 3-tab shingle (SKU 203) and one of the industry's only 3-tab shingles built on NEX polymer-modified (rubberized) asphalt, which earns it a UL 2218 Class 4 hail impact rating rarely seen in the economy 3-tab category. Metric-sized (13-1/4" x 39-3/8", 5-5/8" exposure, 66 shingles/square), it carries 3M smog-reducing and algae-resistant granules. Backed by a limited 25-year shingle warranty with a 60 mph limited wind warranty (upgradeable to 70 mph in an enhanced Malarkey system) and a 5-year algae-resistant system warranty.
Malarkey Legacy (Malarkey Roofing Products)
Malarkey's premium SBS polymer-modified (rubberized asphalt) architectural shingle, rated UL 2218 Class 4 for impact resistance and incorporating NEX smog-reducing granules.
Malarkey 430 OmniSeal Cap (Malarkey Roofing Products)
Malarkey's self-adhered SBS polymer-modified (rubberized) asphalt cap sheet for commercial low-slope roofing, part of the OmniSeal system. The adhesive is activated by sunlight, radiant heat, and applied pressure, eliminating open-flame torch application. Fire resistance is assembly-dependent (the manufacturer's own comparison table lists ASTM E108 Class B & C, with page copy describing "Class B fire rated in a system assembly over a combustible or non-combustible deck"). The manufacturer states an extended system warranty of "up to 17 years," available only when installed as part of a complete Malarkey roofing system by a Malarkey Certified Contractor.
Malarkey Vista (Malarkey Roofing Products)
Malarkey's NEX polymer-modified (rubberized) asphalt architectural shingle, engineered with upcycled rubber and plastic for all-weather resilience and a UL 2218 Class 4 hail impact rating.
Malarkey Windsor (Malarkey Roofing Products)
Malarkey's designer-profile shingle built on NEX polymer-modified (rubberized) asphalt, which blends SBS rubber and plastic polymers into the asphalt core for a UL 2218 Class 4 impact rating and enhanced granule adhesion.
238T (McElroy Metal)
McElroy Metal's symmetrical mechanically seamed standing seam panel with a 2 3/8-inch seam and matching left/right seam legs, so panels are non-directional and individually replaceable. Available in 16, 18, and 24-inch widths (24-inch formed on-site only) in plank-and-pencil, plank, striated, minor-rib, or flat profiles. Standard substrate is 24 gauge Galvalume steel (50 ksi), with 22 gauge Galvalume, .032/.040 aluminum, or 20 oz. copper optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Installs on slopes down to 1/2:12 (1/4:12 with prior approval) in continuous factory lengths up to 200 feet.
Max-Rib (McElroy Metal)
McElroy Metal's exposed-fastener corrugated panel with a 3/4-inch rib height on 9-inch centers and 36-inch coverage width (38/38.5-inch overall width). Standard substrate is 29 gauge Galvalume steel (80 ksi), with 24 and 26 gauge (50 ksi) optional, finished in Acrylic Coated Galvalume, Kynar 500 PVDF, or siliconized polyester/polyester. Installs over plywood or purlins on slopes down to 1:12, with tape sealant required in the side-laps on slopes between 3:12 and 1:12; standard panel lengths run up to 40 feet.
Maxima (McElroy Metal)
McElroy Metal's mechanically seamed, concealed-fastener standing seam family, field-seamed to a 90-degree lock with factory-applied in-seam sealant. Offered in four configurations - Maxima 1.5 (1.5-inch seam), Maxima 2 and Maxima ADV (2-inch seam), and Maxima 3 (3-inch seam) - in panel widths from 12 to 24 inches. Standard substrate is 24 gauge Galvalume steel (50 ksi, ASTM A792), with 22 gauge Galvalume or .032-inch aluminum optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Minimum slope ranges from 1/4:12 to 1:12 depending on configuration.
Medallion-Lok (McElroy Metal)
McElroy Metal's snap-lock, concealed-fastener standing seam panel with a 1 3/4-inch seam height, available in 12, 16, and 18-inch panel widths in striated, ribbed (pencil rib), or flat pan profiles. Standard substrate is 24 gauge Galvalume steel, with 22 gauge Galvalume or .032/.040 aluminum optional, finished in Acrylic Coated Galvalume or Kynar 500 PVDF. Installs on slopes down to 3:12 over solid deck or open framing.
Meridian (McElroy Metal)
McElroy Metal's clipless, snap-together standing seam panel with a 0.91-inch rib height, fastened to solid decking through a prepunched flange rather than separate clips. Available in 12 and 16-inch panel widths, standard 24 gauge Galvalume steel (26 gauge also offered on the 16-inch width), finished in Galvalume Plus acrylic or Kynar 500 PVDF. Requires a minimum 3:12 roof slope over solid decking.
Metal Sales Image II (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's architectural standing seam roof panel with 12-, 16- or 18-inch coverage and a concealed clip designed for thermal movement, installed over solid substrate at a minimum 3:12 slope. Standard in 26 and 24 gauge (22 gauge optional) with PVDF, MS Colorfast45 or acrylic-coated Galvalume finishes, and rated UL 580 Class 90, UL 790 Class A and UL 2218 Class 4.
Metal Sales Magna-Loc 180 (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's architectural/structural standing seam roof system with a 2-inch vertical rib, 16-inch coverage and an integral mechanically seamed 180-degree sidelap with factory-applied sealant. Concealed clips accommodate thermal movement and 1/2-inch to 6-inch blanket insulation, on roof slopes as low as 1/2:12. Formed from ASTM A792 aluminum-zinc alloy-coated Grade 50 steel (0.0230-inch or 0.0296-inch minimum thickness) or ASTM B209 .032 aluminum, in PVDF or acrylic-coated Galvalume finishes.
Metal Sales Pro-Panel II (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's exposed-fastener low-profile roof and wall system with a 3/4-inch bell-top trapezoidal rib on 9-inch centers and 36-inch panel coverage, applied over open framing or solid substrate at a minimum 3:12 roof slope. Offered in 29 and 26 gauge with MS Colorfast45, ColorFit40, acrylic-coated Galvalume and galvanized finishes, and marketed for pole barns, storage sheds, utility buildings and light commercial construction as well as wall, liner, soffit, ceiling and fencing uses.
Metal Sales Vertical Seam (Metal Sales Manufacturing Corporation)
Metal Sales Manufacturing's architectural standing seam roof panel with a concealed-fastener vertical seam. Tested to ASTM E1592 and UL 580 Class 90 wind uplift and UL 2218 Class 4 impact, and offered with a PVDF (Kynar 500) finish.
Newpoint Saxony 900 Shake (Westlake Royal Roofing Solutions)
Concrete roof tile in Westlake Royal's Newpoint concrete tile line, styled to replicate wood shake. The Newpoint line offers Class 4 impact resistance and a Class A fire rating, with Cool Roof options, and is designed to resist hail, high winds, fire and intense UV exposure. Colors include Charcoal and Hickory; availability varies by region.
Newpoint Saxony 900 Slate (Westlake Royal Roofing Solutions)
Concrete roof tile in Westlake Royal's Newpoint concrete tile line, styled to replicate natural slate. The Newpoint line offers Class 4 impact resistance and a Class A fire rating, with Cool Roof options, and is designed to resist hail, high winds, fire and intense UV exposure. Colors include White and Brown Blend; availability varies by region.
Owens Corning TruDefinition Duration FLEX (Owens Corning)
An SBS polymer-modified impact-resistant architectural shingle that pairs Owens Corning's patented SureNail Technology nailing strip with a rubberized asphalt for a UL 2218 Class 4 impact rating and improved cold-weather tear strength.
Owens Corning Duration STORM (Owens Corning)
The SBS-modified, impact-resistant version of Owens Corning's Duration architectural shingle, combining the SureNail Technology nailing strip with a rubberized asphalt that passes the UL 2218 Class 4 impact test.
Owens Corning Woodcrest (Owens Corning)
Thick premium architectural shingle with a rustic, textured appearance designed to create the look of wood shake without the maintenance. Certified to UL 2218 Class 4 impact resistance and carries 25-year algae resistance coverage.
Owens Corning Woodmoor (Owens Corning)
Premium architectural shingle that resembles wood shake with greater durability and less maintenance, thicker and heavier than Woodcrest with more dramatic layered detailing. Certified to UL 2218 Class 4 impact resistance and carries 25-year algae resistance coverage.
Paramount Advantage (PABCO Roofing Products)
Paramount Advantage is a heavyweight, open-tooth architectural shingle in PABCO's Signature Cut line, positioned above Paramount at a nominal 483 pounds per square. It is rated UL 790 / ASTM E108 Class A for fire resistance, UL 2218 Class 4 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
Paramount (PABCO Roofing Products)
Paramount is PABCO's original signature-cut, open-tooth architectural shingle and the founding product of the Signature Cut line, a laminated fiberglass shingle at a nominal 349 pounds per square. It is rated UL 790 / ASTM E108 Class A for fire resistance, UL 2218 Class 4 for impact resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
PABCO Prestige (PABCO Roofing Products)
PABCO Prestige is a heavyweight, laminated architectural shingle built on a fiberglass mat saturated with asphalt and surfaced with mineral granules, designed for custom homes, commercial steep-slope installations, and demanding environments. It is rated UL 2218 Class 4 for impact resistance, UL 790 Class A for fire resistance, and 110 mph standard / 130 mph high-wind-application wind resistance, with Algae Defender granule protection against algae streaking.
TAMKO HailGuard (TAMKO Building Products)
TAMKO's newest impact-protection laminated shingle, marketed as the first and only asphalt shingle system backed by a hail warranty. Built with ImpactCore technology using advanced polymers and reinforced construction engineered to absorb and disperse hail impact energy, and tested beyond standard UL 2218 Class 4 requirements. Supports a 160 mph limited wind warranty when installed with TAMKO starter and hip-and-ridge components, carries an extended hail warranty of up to 20 years, and can be installed in temperatures as low as 25 F as part of the TAMKO Complete roofing system.
TAMKO StormFighter FLEX (TAMKO Building Products)
TAMKO's polymer-modified impact-rated laminated shingle. Double-layer laminated fiberglass mat construction with premium asphalt modified by ForceFX polymer technology, the Rapid Fire Zone expanded nailing zone, and the AnchorLock reinforced nail line that supports a 160 mph WindGUARD High Wind Limited Warranty. Offered in Class 3 (FLEX 3) and Class 4 (FLEX 4) UL 2218 impact ratings, and installable at temperatures down to 25 F.
Unified Steel Barrel-Vault Tile (Westlake Royal Roofing Solutions)
Stone-coated steel roofing panel with a high barrel tile design in the style of Spanish tile, offered in colors including Spanish Red, Sunset Gold and Dover. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line, which is Class 4 impact rated, resistant to fire, wind and hail, lightweight, made in the USA and backed by a 50-year limited transferable warranty.
Unified Steel Cottage Shingle (Westlake Royal Roofing Solutions)
Stone-coated steel roofing panel with a unique offset, multi-grooved, deep weather side-lap that creates a classic cottage shingle look. Manufactured from Galvalume steel coated with stone granules applied with acrylic polymer adhesives, it is lightweight at about 1.5 pounds per square foot, meets fire, hail (Class 4, FM Very Severe Hail) and wind (up to 180 mph) resistance standards, and is 100% recyclable. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line.
Unified Steel Granite-Ridge Shingle (Westlake Royal Roofing Solutions)
Stone-coated steel roofing panel with a sleek, low-profile shingle appearance and high wind resistance. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line, which is Class 4 impact rated, resistant to fire, wind and hail, lightweight, made in the USA and backed by a 50-year limited transferable warranty.
Unified Steel Pacific Tile (Westlake Royal Roofing Solutions)
Stone-coated steel roofing panel that combines a classic Mediterranean tile style with high wind and hail impact resistance. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line, which meets fire, hail (Class 4, FM Very Severe Hail) and wind (up to 180 mph) resistance standards, is lightweight, made in the USA and backed by a 50-year limited transferable warranty.
Unified Steel Pine-Crest Shake (Westlake Royal Roofing Solutions)
Stone-coated steel roofing panel engineered to replicate hand-split wood shake with the durability of steel. Class 4 hail impact resistant, meets the FM standard for Very Severe Hail (VSH), Class A fire rated, hurricane wind performance rated, lightweight, and 100% recyclable. Part of Westlake Royal Roofing Solutions' Unified Steel stone-coated roofing line.