Home / Metal Roofing Manufacturers
Metal Roofing Manufacturers
Manufacturers with at least one cataloged metal roofing product.
AEP Span
A manufacturer of architectural and commercial metal roofing and siding panels. Its About Us page states that the business began manufacturing as ASC Pacific at its Tacoma facility in 1971, later acquired the Dallas-based AEP Span Inc., and today manufactures from two locations, West Sacramento, California and Tacoma, Washington. It is a division of ASC Profiles LLC, which the page describes as co-owned by Nippon Steel and BlueScope. Its roof line includes snap-together and mechanically seamed standing seam panels (Design Span hp, Span-Lok hp, SpanSeam, Select Seam) and exposed-fastener panels (HR-36, Nu-Wave Corrugated, PBR and others).
Agway Metals Inc.
Agway Metals Inc. is a Canadian steel building products company that makes cladding, roofing and decking profiles for residential, agricultural, industrial, commercial and institutional markets, and says it has done so for over 40 years. It lists plants in Brampton, Exeter and Oakville, Ontario, and a Drummondville-area plant in Quebec that opened in October 2024 to produce its Optimum Rib and Nordet 36 profiles. Its metal roofing line includes concealed-fastener AR Standing Seam, Nail Strip and Snap Lock panels and exposed-fastener ribbed and corrugated panels. Agway names itself as part of the Bailey Group of Companies with Bailey Metal Products and Bailey Metal Processing.
All Weather Insulated Panels
All Weather Insulated Panels (AWIP) designs and manufactures foam composite insulated metal panels for the North American building market. It operates continuous line manufacturing facilities in Vacaville, California, Little Rock, Arkansas and East Stroudsburg, Pennsylvania. Its roof catalog covers the HR3 and HR5 through-fastened high-rib roof panels and the SR2 standing seam roof panel, alongside wall, roof deck, fire-rated and solar-mount panel lines.
Allsteel Inc.
Allsteel Inc. is a manufacturer of metal roofing and siding founded in 2006, operating manufacturing facilities in Gepp and Harrison, Arkansas, and West Plains, Missouri. It roll-forms exposed-fastener roof and wall panels (Apex, Tuff Rib and PBR) and concealed-fastener standing seam roof panels (Snap Lock 1 inch, Clip 1.5 inch and Mechanical 1.5 inch), forming its standing seam panels on the jobsite, and also bends custom trim and sells metal buildings, insulation and accessories.
American Building Components
American Building Components (ABC, trading online as ABC Metal Roofing) is a manufacturer of steel roof and wall panels, trim, light-gauge framing and accessories, and part of Cornerstone Building Brands, Inc. Its about page says it has manufactured since 1908 and sells through authorized dealers and distributors, who order through its online ordering tool. Its locations page lists a main office in Houston, Texas and plants in Adel, Georgia; Mt. Pleasant, Iowa; Oklahoma City, Oklahoma; Rome, New York; Tolleson, Arizona and Salt Lake City, Utah. Its roofing panels span exposed-fastener profiles (PBR, PBU, 5V Crimp, corrugated and others) and the LokSeam and Slimline concealed-fastener panels.
ATAS International
A family-owned manufacturer of metal roofing, wall cladding, ceilings, and accessories in aluminum, steel, zinc, stainless steel, and copper. Headquartered in Allentown, Pennsylvania.
BEMO USA Corporation
BEMO USA Corporation, established in 1999, is the headquarters for BEMO's US operations and is based in Mesa, Arizona, with associated companies in Europe, Qatar, Singapore, Brazil and the United Kingdom. It makes standing seam metal roof and wall systems in aluminum, steel, stainless steel, zinc, copper and titanium. Its roof panels are roll-formed on self-contained BEMO-Mobile Factory Mills housed in shipping containers, which allows on-site panel manufacturing.
Berridge Manufacturing Company
A manufacturer of architectural metal roof and wall panels, painted coil and flat sheet, and portable roll-forming equipment. Headquartered in San Antonio, Texas.
Buckeye Metal Sales
Buckeye Metal Sales is a family-owned metal roofing and siding supplier based in Frankfort, Ohio, founded in 2004. It roll-forms its own Standing Seam, Buckeye Wave and Standard 5-Rib steel panels, including on-site roll-forming of standing seam, and also sells trim, fasteners and other building supplies. It serves contractors and homeowners within about 100 miles, including Columbus, Dayton and parts of Kentucky and West Virginia.
Butler Manufacturing
Butler Manufacturing was founded in Kansas City in 1901 and makes pre-engineered metal building systems, including roof, wall, structural framing and insulation systems sold through its Butler Builder network. Its roof systems include the MR-24 standing seam roof, introduced in 1969, the Butlerib II through-fastened roof and the VSR II architectural standing seam roof. BlueScope Steel Limited acquired the company in 2004, and it is a division of BlueScope Buildings North America, Inc.
Caliber Metal LLC
Caliber Metal LLC is a metal roofing and steel building supplier in Cameron, Texas, founded in 2017, that states it manufactures and supplies metal, steel and hardware for Central Texas. It roll-forms custom-length roof and wall panels to order, including PBR, AG (classic rib) and standing seam profiles, and also bends trim. Its panels are offered in over 20 standard and 30 premium colors with a Valspar paint finish.
Ceco Building Systems
Ceco Building Systems engineers and fabricates metal building projects and has served the commercial building industry since 1947, when C. L. Mitchell founded it. Its history page states that Robertson-Ceco Corporation was sold in 2006 to NCI Building Systems, now known as Cornerstone Building Brands. Its roofing line is metal roof panels for its buildings: standing seam panels (Double-Lok, BattenLok HS, SuperLok, Ultra-Dek) and the ribbed PBR panel. Its contact sheet gives its address as 100 Red Iron Rd., Rocky Mount, North Carolina.
Central States Manufacturing
A 100%-employee-owned manufacturer of metal roofing and siding panels, metal building packages, and metal building components, rebranded from "Central States Manufacturing" to "Central States" on its consumer-facing site while continuing to use the original name in its own corporate and legal copy (photo-release language, Facebook page @CentralStatesMfg). Its metal roofing line spans exposed-fastener panels (5V, R-Loc, M-Loc, Panel-Loc Plus) and standing seam panels (Central-Loc, Central Snap), manufactured and distributed from multiple U.S. plants.
CENTRIA
CENTRIA is a manufacturer of architectural metal wall and roof systems, including insulated metal panels, rainscreen and exposed-fastener panels and structural standing seam roof panels, and is a Nucor company. Its site footer lists its office at 700 State Highway 121 Bypass in Lewisville, Texas, and it sells through sales representatives. Its roof systems include the SRS 3, SDP 175 and SDP 200 standing seam panels and the Versapanel insulated metal roof panel.
Chief Buildings
Chief Buildings is a metal building manufacturer and part of Chief Industries, a family-owned company founded in 1954 in Grand Island, Nebraska. It sells metal building systems through Chief Independent Builders, along with steel roof and wall panels, including the MSC and STC 24-inch standing seam roof panels, the MVF and MVP 16-inch vertical-leg roof panels, and the 36-inch CS panel for roof or wall use.
Custom-Bilt Metals
A maker of metal roofing, gutter, wall and soffit systems for the Western United States and Hawaii. Its About page states it was founded in 1980 and says it makes metal roofing and gutter systems; its roofing listing describes its CB Series standing seam as field roll-formed on the jobsite to exact length, and its locations page lists nine locations with onsite roll forming (Chino, McClellan, San Jose and Van Nuys, California; Lakewood and Spokane, Washington; Portland, Oregon; Phoenix, Arizona; and Honolulu, Hawaii). Its own line covers concealed-fastener standing seam (CB-2000, CB-150, CB-100), snap-lock (SL-1750, SL-150, SL-100, SLZ-1000), a batten-style CS-100, Vintage standing seam and exposed-fastener TFR-36, PBR and corrugated panels; its aluminum and steel shingle and shake category is labelled with the Isaiah Industries name. The site footer carries the copyright of Custom Bilt Holdings, LLC and an address at 3001 N Skyway Circle, Irving, Texas.
Delta Metals
Delta Metals is a metal roofing and siding manufacturer founded in 2008 in Western Colorado, with its Colorado plant at Delta, serving Western and Central Colorado and Eastern Utah. A sister rollforming operation, Delta Metals Iowa, was founded in 2013 in Leon, Iowa, moved to a 56,000 sq. ft. facility in Lamoni, Iowa in 2022, and acquired rollformer Richmond Metals of Richmond, Missouri in 2023. It rollforms concealed-fastener standing seam panels and exposed-fastener rib and corrugated steel roof and wall panels.
Dimensional Metals, Inc.
A manufacturer of architectural metal roof and wall panel systems and fabricated architectural sheet metal. Its About page states that since 1988 the company has specialized in this manufacturing, with in-house CNC-operated fabrication equipment, an engineering department producing project shop drawings, field technical inspectors and Total System Watertight Warranties. Its contact page lists its Ohio headquarters at 58 Klema Drive North, Reynoldsburg, with a further facility in Columbus. The roof line comprises mechanically seamed structural panels (Span-Lock, Tee-Lock, Double-Lock, Inter-Lock, Ultra-Lock), snap-together panels (Snap-On-Seam, Nail-Strip, Batten-Seam) and curved and tapered variants, sold with its DynaClad 70 percent PVDF paint finish.
Drexel Metals
A manufacturer and distributor of engineered metal roofing systems, wall panels, edge metal and roll-forming equipment. Its About Us page states that Drexel Metals Corporation was founded in 1985, that Drexel Metals Inc. was formed as a successor company in 2009, and that it acquired the custom fabricator Met-Fab Manufacturing two years later. It operates sales, fabrication and distribution locations across the United States and extends fabrication through its Drexel Metals Plus network of authorized fabricators, certified installers and distributors. Its roof panel line spans mechanically seamed, snap-lock and batten standing seam profiles (DMC 100SS, 150SS, 175S, 200S, 250T, 450SL, 550S) and an exposed-fastener 5V panel.
Duchesne
Duchesne is a manufacturer and distributor of building materials based in Yamachiche, Quebec, in business since 1927 and selling throughout Canada and the United States. It rollforms steel roofing profiles (TR 5, TR 7, TR 9, TR 80, TR 11 and CRG 7/8 corrugated) and concealed-fastener steel profiles (Authentik, Classik and Majestik), along with steel and aluminum siding, trims, nails, polyethylene film and concrete reinforcement.
EDCO Products
A manufacturer of steel roofing and steel siding, headquartered in Hopkins, Minnesota. Its steel roofing line includes ArrowLine Shake, ArrowLine Slate, Generations HD Shake and Infiniti Textured Shake, each a PVDF-coated steel panel styled to resemble cedar shake or natural slate; EDCO markets these as a lighter-weight, chip/crack/peel-resistant alternative to true stone-coated metal roofing rather than as a stone-coated product itself. It also makes steel siding, soffit, fascia, trim and rainware lines.
Elevate
A manufacturer of commercial low-slope roofing and building envelope systems, including RubberGard EPDM and UltraPly TPO. Formerly Firestone Building Products; became "Elevate," the premier commercial brand of the Holcim Building Envelope division, in 2022. Holcim spun off its North American business as an independent, publicly traded company named Amrize in June 2025, and Elevate's homepage now states it is "Now Part of Amrize" and that, "Under Amrize, our Elevate brand will continue delivering the trusted products and services you know and rely on." The legacy holcimelevate.com domain no longer resolves; the live site is elevatecommercialbp.com.
Englert
A manufacturer of metal roofing systems, seamless gutters, and on-site roll-forming equipment, best known for standing-seam metal roof panels. Headquartered in Perth Amboy, New Jersey.
Everlast Roofing
Everlast Roofing, Inc. is a Pennsylvania manufacturer of light-gauge steel and aluminum roofing and siding panels, trim and accessories for residential, post-frame, commercial and agricultural buildings, sold through distributors. Its history page says it incorporated in 1996, ran its first panels in Ephrata, Pennsylvania in 1997 and later moved to Lebanon, Pennsylvania; it lists locations in Lebanon, Pennsylvania; Howe, Indiana; Orwell, Ohio and Bridgton, Maine. Its panel range includes the Everlast II and Everdrain exposed-fastener panels, PBR, the aluminum Twin Rib, and the Everloc and Everseam concealed-fastener panels.
ExSteel Building Components
ExSteel Building Components is a manufacturer of steel building components based in Aylmer, Ontario, and part of Ardent Industries, the family-owned group that also includes Steelway Building Systems. Since 2004 it has manufactured cold-formed structural sections, steel roof and floor decking, steel roof and wall cladding, trims and flashings, and roofing retrofit systems for projects across North America. Its roof panels include the StormSeal, StrucSeal, VersaSeal and DiamondSeal exposed-fastener profiles and the RTL-24 standing seam roof system.
Fabral
A maker of metal roofing and wall panel systems for architectural, commercial, industrial, residential and agricultural buildings. Its About page states the company was founded in 1967 and describes it as a supplier of metal post-frame materials and metal cladding. Its contact page lists plants in Lancaster, Pennsylvania, Jackson, Georgia and Ft. Worth, Texas, and its product listings name further manufacturing locations in Gridley, Illinois, Marshfield, Wisconsin, Salt Lake City, Utah, Spokane, Washington and St. Joseph, Minnesota. Its roof line runs from mechanically seamed structural standing seam (Stand 'N Seam, PowerSeam II, IP Seam) and snap-lock panels (Horizon S100, 1 1/2 inch SSR 150) to exposed-fastener rib panels (Grandrib 3, FabRib).
Forma Steel
Forma Steel is a family-owned manufacturer of steel roofing, siding and trim in Fort Macleod, Alberta, founded in 1992 as a sister company of Structural Truss Systems. It rollforms exposed-fastener roof and wall panels (FC-36, I/9, FR and 7/8 inch corrugated) and concealed-fastener standing seam panels (FormaLoc, Nail Strip, Mechanical Loc and ClipLoc), along with trim, soffit and cladding. It also sells Wakefield Bridge steel shingles, which are manufactured by Ideal Roofing Company Limited.
GAF
North America's largest roofing manufacturer, producing residential asphalt shingles and commercial low-slope systems. A Standard Industries company.
Green Tree Metals
Green Tree Metals is a Georgia supplier of metal roofing and siding with locations in Hartwell and Winterville, and states that it manufactures its metal roofing and siding in Georgia. It produces exposed-fastener panels (5V Crimp, Tuff-Rib and R Panel/PBR), Cortex Board & Batten, and the Hemloc family of standing seam panels, custom cut to the inch. It also runs an in-house shop that fabricates custom trim.
Gulf Coast Supply & Manufacturing
Gulf Coast Supply & Manufacturing is a metal roofing manufacturer that started in 1996 in Horseshoe Beach, Florida, and has its corporate headquarters in Newberry, Florida. It operates four manufacturing locations across Florida, Alabama and South Carolina. Its product catalog lists nine metal roof panel profiles: the GulfLok, GulfSeam, GulfSnap, VersaLoc and MegaLoc concealed-fastener (standing seam) panels and the GulfRib, 5V Crimp, GulfPBR and GulfWave exposed-fastener panels, with trim and accessories.
Ideal Roofing
Ideal Roofing is a family-owned manufacturer of steel roofing and siding founded in Ottawa, Ontario in 1929, with its head office in Ottawa, manufacturing facilities in Brampton, Ontario and Moncton, New Brunswick, and a regional office in Quebec City. It roll-forms exposed-fastener and concealed-fastener steel roof panels and presses Wakefield Bridge steel shingles and Monteciano steel roofing tiles, along with siding, steel deck and trim. The company states it serves clients across Canada and the United States.
IMETCO
IMETCO (Innovative Metals Company) is a Georgia manufacturer of architectural and structural metal roof and wall cladding, coping and fascia, rainscreen and roof deck systems. Its anniversary page dates the company to 1994, when it was formed from the architectural metal division of MM Systems, Inc., and records later acquisitions including Merchant & Evans, Inc. in 2021, which brought the ZIP-RIB standing seam system and a plant in Burlington, New Jersey. Its contact page lists headquarters in Norcross, Georgia and plants in McClellan, California and Burlington, New Jersey.
Interlock Metal Roofing
A family-owned maker of lifetime aluminum metal roofing systems, in business since 1998, with Interlock Roofing Ltd. based in Delta, British Columbia, and quotes and installation handled by local Interlock installers across North America. Its homepage advertises UL 2218 Class 4 impact resistance and a lifetime limited, 50-year transferable warranty, and it sells aluminum Slate, Cedar Shingle, Shake, Mediterranean Tile and Standing Seam profiles, with solid copper also available.
Isaiah Industries
A manufacturer of residential metal roofing, including aluminum and steel shingles and standing seam systems, founded in 1980. Its brands include Classic Metal Roofing Systems, Kassel & Irons, and Green American Home.
Kingspan Insulated Panels
Kingspan Insulated Panels is the North American insulated metal panel business of the Kingspan group, headquartered in DeLand, Florida. Its US catalog covers insulated panel systems for roofs and walls, architectural panel and facade systems, and controlled-environment panels. Its insulated roof panels are the KingRib trapezoidal and KingSeam standing seam systems, both with PIR insulation cores.
Klauer Manufacturing Company
A Dubuque, Iowa manufacturer of residential flashing, roof edge, siding and rainware products, offering what it calls the most complete line of residential flashing in the industry in both steel and aluminum, including roof edges, drip edges, gutter aprons, gravel stops, reglet and counter flashing, angle flashing, kick-out flashing, and formed and roll valley metal.
MAC Metal Architectural
MAC Metal Architectural designs and manufactures pre-painted steel siding and roofing profiles in Quebec, with its address at 5975 chemin de la Savane in Saint-Hubert. Its roofing lines are concealed-fastener vertical steel profiles (MS 1 and MS 2, MS 1 Modular, MS 3 and MS 4, and MS Authentic) that are also used as wall cladding. The Bill S-211 report published on its site names Mac Architectural Metals Inc. in a joint statement with Cornerstone Building Brands Canada Inc., a wholly owned subsidiary of Cornerstone Building Brands Inc.
MBCI
A manufacturer of metal roof and wall panels whose own locations page lists Houston, Texas as its main office, and whose home page states that it has supplied metal roof and wall products since 1976. Its site footer identifies it as part of Cornerstone Building Brands, Inc. Its metal roofing line spans exposed-fastener panels (PBR, PBU, 5V Crimp) and standing seam panels (Double-Lok, BattenLok HS), manufactured at plants across the United States.
McElroy Metal
An employee-owned (ESOP) manufacturer of metal roofing and wall systems, including standing seam and exposed-fastener panels, founded in 1963.
Metal America
Metal America is a family-owned steel coil processing facility and maker of metal roofing and siding, founded by brothers Shawn and Justin Sternberg, with locations in Post Falls, Idaho and Spokane Valley, Washington. It states that it rolls steel at its Post Falls facility and that all of its panels and trim are manufactured there. Its roof panels include concealed-fastener standing seam profiles (QuickLoc, 1.5 and 1.75 inch Snap Lock, Mechanically Seamed) and exposed-fastener profiles (Tuff Rib, PBR, 7/8 inch Corrugated and 7.2 Panel).
Metal Exteriors
Metal Exteriors is a family-owned manufacturer of roll-formed steel roofing and siding panels in Shiloh, Ohio, founded in June 2013. Its roofing profiles include the Elite Rib and Parallel Rib exposed-fastener panels, the Ultra Max and PBR commercial panels and the Metal Loc 1.5 standing seam panel, offered in 24, 26, 28 and 29 gauge where applicable. It also makes more than 30 trim profiles.
Metal Panels Inc.
Metal Panels Inc. (MPI) manufactures metal roofing, siding, storage components and decking products for the metal roofing, metal building, storage and post-frame trades, and states it has served those industries since 2001. It operates a 181,000 square foot manufacturing facility in Tulsa, Oklahoma and a 34,000 square foot facility in Kansas City, Kansas. Its catalog lists exposed-fastener and concealed-fastener (standing seam) roof panels roll-formed from U.S.-made steel, plus trim, purlins and steel deck.
Metal Roofing Center
Metal Roofing Center is a locally owned metal roofing manufacturer and distributor in Foley, Alabama, with a second location in Punta Gorda, Florida. It fabricates exposed-fastener and standing seam steel roofing panels (M Panel, PBR Panel, Classic Rib, Cor Span, 5-V Crimp and Standing Seam) at its Foley plant and runs an on-site trim fabrication shop. It also distributes other roofing products and components.
Metal Sales Manufacturing Corporation
One of the largest manufacturers of metal roofing, wall, and building panels in the United States, producing exposed-fastener and standing-seam metal systems from plants nationwide. Headquartered in Louisville, Kentucky.
Metl-Span
Metl-Span, a Nucor company, is a North American manufacturer of insulated metal panels for institutional, commercial and industrial buildings, headquartered in Dallas, Texas, with manufacturing plants across the United States and Canada. Its insulated roof products are the CFR insulated standing seam roof panel, the LS-36 exposed-fastener insulated roof and wall panel, and the TerraVue insulated roof deck system, which takes a field-applied TPO or PVC membrane.
Morin Corporation
Morin Corporation roll forms architectural, heavy gauge, single skin metal wall and metal roof systems. The company was established in the early 1960s in Bristol, Connecticut, and was acquired by Kingspan Group Companies in 2008, and its company address is 685 Middle Street, Bristol, Connecticut. Its roof systems include standing seam, snap-lock and batten seam metal roof panels.
Mueller, Inc.
Mueller, Inc. manufactures and supplies steel buildings, metal roofing and wall panels, with in-house manufacturing and a network of manufacturing plants and retail stores; its corporate headquarters is in Ballinger, Texas. Its roof panels include exposed-fastener profiles (7.2, SSP, AP, CPB, PBU), concealed-fastener snap-together profiles (CF, CWH, CWP) and clip-attached standing seam profiles (MLK, MSL, MTL). Mueller is part of Cornerstone Building Brands, and Fortify Building Solutions retail stores began moving to the Mueller name on October 1, 2025.
National Metal Sales
National Metal Sales is a sheet metal fabrication shop and distribution center in Brownstown, Michigan, whose largest lines are formed metal roof and siding panels, trims and accessories, and roof edge systems for commercial roofing. It roll-forms standing seam roof panels on site (the SS100, SS150, SS200, SS210A, SS450 and SS675 profiles) and states that it is an ES-1 UL certified fabricator of shop-fabricated edge metal. Its panel catalog also lists McElroy Metal profiles, such as Medallion-Lok and the curved Maxima, 138T and 238T systems.
NedZink
NedZink is a Dutch producer of rolled titanium zinc for roofing, cladding and facades, and part of Koramic Investment Group and ElvalHalcor S.A. It produces titanium zinc to EN 988 and ASTM B69 in NATUREL, pre-weathered NEO, NOIR and NUANCE, and back-coated Pro-Tec finishes, supplied as sheets and coils. Its US site lists sales agents covering US states and Canada.
Norbec
Norbec is a Canadian manufacturer of prefabricated walk-in coolers and freezers, doors, and architectural insulated metal panels for the building envelope. Its roofing product is NorSeam, an insulated standing seam roof panel system with a polyisocyanurate core. Norbec is based in Boucherville, Quebec.
Novatik
A European maker of stone-coated steel roof tiles (the Natura range) and pre-painted modular steel roof tiles (the Metal range), sold in the United States direct to homeowners through a US arm in Florida. Its technical data sheets state the panels are manufactured by NOVATIK SRL and distributed by NOVATIK Distribution, LLC, and Miami-Dade Notice of Acceptance 24-0822.01 gives the manufacturing location as Prahova, Romania. The company's about page states it has manufactured since 2004 on four automated lines.
Nu-Ray Metals
A Washington state roll-former of steel roofing and siding panels, trim, flashing and related accessories, part of the Gibraltar Building Products portfolio of Gibraltar Industries, Inc. Its company page traces the business to a metal roofing machine founder Tim Bankers bought in 1981, growing from a local metal roofing installer into a manufacturer supplying panels to contractors and dealers along the West Coast, with sales staff in Washington and California. Its roofing range covers concealed-fastener clip, snap-lock and mechanically seamed standing seam panels plus exposed-fastener and corrugated panels.
Nucor Building Systems
Nucor Building Systems is a steel building manufacturer that began in 1987 as a single location in Waterloo, Indiana, and now has plants in Indiana, South Carolina, Texas and Utah, selling through a network of over 1,200 Authorized Builders across North America. Its roof panel systems include the Nucor CFR standing seam roof, the Loc Seam vertical rib standing seam panel and R-Panel, alongside the R-Boost elevated roof insulation system.
Onsite Metals
Onsite Metals is a metal roofing and siding manufacturer based in Edmonton, Alberta, that roll-forms its panels in its Edmonton facility and delivers across the province. Its roof panel profiles are standing seam, snap lock, corrugated/AG and R-Panel/PBR in steel with a Kynar 500 PVDF coating, roll-formed to order in run lengths up to 40 feet. It also makes siding, soffit and fascia panels and brake-formed flashing and trim, and offers installation.
Petersen Aluminum
A manufacturer of architectural metal roof and wall panel systems sold under the PAC-CLAD brand, in aluminum and steel. A business of Carlisle Companies Incorporated, headquartered in Elk Grove Village, Illinois.
ProVia
ProVia is an Ohio manufacturer of entry and storm doors, windows, vinyl siding, manufactured stone and stamped steel metal roofing sold through dealers. Its contact page lists corporate headquarters and entry door production at its Walnut Creek facility in Sugarcreek, Ohio, and vinyl siding and metal roofing production in Booneville, Mississippi. Its metal roofing is a line of 26-gauge galvanized steel shake, slate and barrel tile panels with a Kynar 500 based finish, installed by trained installers.
Reinke Shakes
A maker of tightly corrugated aluminum and solid copper roofing shingles, produced in Hebron, Nebraska since 1976. Its current Reinke Shakes LT (Life-Time) shingle, introduced in 2019, replaced the smaller, thinner shingle it made from 1976 to April 2019. The company's site describes it as a division of Jame Kari LLC, a family-owned company.
RHEINZINK
RHEINZINK is a producer of titanium zinc, founded in 1966, that makes its material at its headquarters in the Ruhr region of Germany (Datteln) and exports it worldwide; it is a subsidiary of the Grillo Group. Its program covers roofing, facade cladding and roof drainage. Its zinc roof systems are double lock standing seam, angled standing seam, click roll cap and flat lock tiles, offered in bright rolled, prePATINA ECO ZINC, GRANUM and PRISMO surfaces, and its North American documents are issued by RHEINZINK America, Inc.
Scotia Metal Products
Scotia Metal Products is a roll-formed steel roofing and siding manufacturer in the Burnside Industrial Park, Dartmouth, Nova Scotia, which has manufactured steel roofing products there since 2007. It makes metal roofing and siding panels from Galvalume (zinc and aluminum alloy coated) steel for residential, commercial, industrial and agricultural buildings, including the Majestic, Atlantic and Portland nail-strip standing seam roof profiles and the Burnside wall panel, in 24 colours.
Star Building Systems
A custom-engineered metal building manufacturer whose own history page states it began in Oklahoma City in 1927 as Star Manufacturing Company and was later renamed Star Building Systems. Its site footer identifies it as part of Cornerstone Building Brands, Inc. Its roof systems include standing seam roof panels (BattenLok HS, Double-Lok, SuperLok, Ultra-Dek) and exposed-fastener roof and wall panels (PBR, PBC, PBD, PBU), sold through its authorized builder network.
Steel Tile Co.
Steel Tile Co. is a metal roofing producer in Innisfil, Ontario, founded in 1986 as a family-owned business, which describes itself as the largest tile-profiled metal panel producer in Canada. It roll-forms galvanized steel roof panels in tile, slate and shake profiles (Slate Shake, Elite, Katech, Katola), ribbed panels (Muskoka, Summit) and 1-1/2 inch standing-seam panels for residential, agricultural and commercial roofs. Its published SMP paint warranty is a limited 40-year warranty from Steel Tile Co., a division of 1326111 Ontario Limited.
Taylor Metal Products
A West Coast manufacturer of metal roofing and siding panels whose About page states it has made metal roofing and siding since 1985 and serves the western United States from multiple branches, listing Salem, Oregon; Sacramento and Riverside, California; and Auburn and Spokane, Washington. Its product pages state which branch roll-forms each profile. Its roof line spans snap-lock and mechanically seamed standing seam panels (Easy-Lock, StreamLine, Versa-Span, Slim-Lock) and exposed-fastener panels (PBR, Tuff Rib, Classic 7/8 inch Corrugated and others), and it operates its own delivery fleet.
Tefute USA
A supplier of stone-coated steel roofing tiles in tile, shake and shingle profiles, sold to homeowners and professionals through roofing partners. ICC-ES Evaluation Report ESR-4036 names Tefute USA, Inc. as report holder for its steel roofing tiles, pressure-formed from AZ50 aluminum-zinc coated steel with a stone granule top surface. Its contact page gives an address in Fort Worth, Texas.
The Garland Company
An employee-owned manufacturer of built-up, modified bitumen, single-ply and metal roofing systems and coatings, founded in 1895 as Garland Refining Company and renamed The Garland Company, Inc. under Ohio law in 1914. Garland introduced StressPly in 1980 as the first high-performance modified bitumen roofing system manufactured in North America and has operated from its Cleveland, Ohio plant since 1919.
Tilcor North America
A manufacturer of pressure-formed, stone-coated steel roofing panels in tile, shake and shingle profiles, made from 26-gauge, 55% aluminum-zinc alloy coated steel with an embedded stone granule surface over an acrylic base coat and clear acrylic over-glaze. Operated by Ross Roof Group, whose roofing lineage traces to Ross Roofing/Ross Concrete Products in New Zealand (1942-1946); Ross Roof Group started Tilcor Roofing Systems in 2011 to supply the USA, Canada, Europe, Africa and the Middle East from its New Zealand factory. The North America operating company is legally Ross Roof Group, Inc. DBA Tilcor North America, based in Galt, California.
Tri County Metals
Tri County Metals is a Florida metal roofing company that manufactures and distributes metal roofing panels, trim and accessories, with a production facility in Trenton, Florida and branch locations across the state. Its catalog covers exposed-fastener panels (Ultra Rib, PBR, 5V) and standing seam panels (TCM-LOK, SL-LOK, SS-LOK, MS-LOK) in steel and aluminum, and delivers to Florida and several southern Georgia counties.
Ultra Seam
Ultra Seam is a US maker of metal roofing and siding systems that describes its plant locations as spread across the United States, with plants listed in Alaska, Arizona, California, Hawaii, Kentucky, Louisiana, Michigan, New Jersey, North Carolina, Oklahoma, South Carolina, Tennessee and Texas. Its roof panel line includes mechanically seamed, snap-on, Lok-Seam, Clip-Lok and nail strip standing seam profiles in steel, aluminum, zinc, stainless and copper, alongside wall panels and edge systems.
Union Corrugating Company
A manufacturer and distributor of metal roofing and wall panels operating, per its own about page, "for more than 75 years." Union Corrugating Company is a brand of Cornerstone Building Brands, the same parent company as MBCI, and manufactures and distributes exposed-fastener panels (PBR, MasterRib, 5V) and standing seam panels (SL150, SL175, Advantage-Lok II, Double-Lok) from plants including Fayetteville, NC; Tipp City, OH; Morrison, TN; Ocala, FL; Dunmore, PA; Tifton, GA; and Vicksburg, MS.
Varco Pruden Buildings
Varco Pruden Buildings is a maker of custom-designed pre-engineered metal buildings and hybrid steel buildings, sold through a network of more than 750 builders, and is a division of BlueScope Buildings North America, Inc. Its headquarters is at 3200 Players Club Circle in Memphis, Tennessee. The company dates its origins to 1948 and took the Varco Pruden Buildings name in 1968, when Varco Steel and Pruden Products were merged. Its roofing systems are the SSR standing seam roof, the SLR II architectural standing seam roof and the Panel Rib exposed-fastener roof panel.
VMZINC
VMZINC is a brand of rolled titanium-zinc building products made from an alloy of zinc with controlled amounts of copper and titanium, produced at plants in France and supplemented by plants in Belgium, Germany, Switzerland and Slovakia. Its range covers systems and products for roofing and facades, accessories and flashings, rainwater systems and ornaments, and it offers pre-weathered finishes alongside mill-finish Natural Zinc. In the United States the brand is represented by VM Building Solutions USA Inc. of Cary, North Carolina, whose roofing systems include double lock standing seam zinc panels and the ADEKA pre-formed zinc roof element.
Western States Decking, Inc.
Western States Decking, Inc. was established in 1996 as a distributor of metal decking, later bought its own roll-forming equipment and now does business as Western States Metal Roofing. It manufactures metal roofing and metal siding panels, coil and flat sheets, with a manufacturing facility in Phoenix, Arizona and further manufacturing facilities in the Dallas / Fort Worth area of Texas and Spokane Valley, Washington. Its roof panels include exposed-fastener corrugated, PBR, Western Rib and Ag Panel profiles and standing seam panels.
Westform Metals
Westform Metals roll-forms prepainted sheet steel roofing and siding panels, cut to length, at plants in Chilliwack, British Columbia and Lacombe County, Alberta. The company traces to a Chilliwack lumber yard founded in 1961 by the Visscher brothers, who opened a metal forming plant in 1975. It makes exposed-fastener rib and corrugated panels and a concealed-fastener panel (Prolok) for agricultural, commercial and residential buildings in BC, Alberta and Saskatchewan, and also sells flashings and installation accessories.
Westlake Royal Roofing Solutions
The roofing division of Westlake Royal Building Products, offering clay tile (US Tile), concrete tile, stone-coated steel (DECRA), and composite roofing brands. Part of Westlake Corporation, headquartered in Houston, Texas.
Westman Steel
Westman Steel is a Canadian manufacturer of steel roofing and siding and part of WGI Westman Group Inc., making steel roofing and siding since 1982. It rollforms concealed-fastener standing seam roof panels (SNAP-LOK, Snap Seam, Mechanical Lock and SSR 24) and exposed-fastener roof and wall panels (Tough Rib, 936, Diamond Rib, AWR, Deck Mate, RD36, Rainbow Rib and corrugated profiles) for agricultural, commercial and residential buildings, along with trim, cladding and door systems.
Zappone Manufacturing
A maker of individual, four-way interlocking metal shingles in solid copper and Kynar-coated or mill finish aluminum, with a concealed nailing flange, sold for roofs, bay window roofs, steeples and vertical wall cladding, along with matching starter, gable, hip and ridge, wall and valley flashings. It is based in Spokane, Washington.