The Roofing Book

Home / Roofing by City / Owasso, Oklahoma

Roofing in Owasso, Oklahoma

Hail belt

Owasso, Oklahoma sits in one of the country's most hail-prone regions. This hub aggregates Owasso's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Owasso

Roofing permit and contractor-licensing rules in Owasso are set locally by City of Owasso - Community Development Department, Building Division. Oklahoma's Roofing Contractor Registration Act requires roofing contractors to register with the state Construction Industries Board, and cities layer their own permitting and registration on top — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
Owasso's Building Permits & Inspections page lists as adopted: International Building Code, 2018; International Plumbing Code, 2018; International Mechanical Code, 2018; NEC Electric Code, 2017; International Fire Code, 2018; and International Residential Building Code for One- and Two-Family Dwellings, 2018.
Registration details
  • license: City FAQ states "The City of Owasso does not issue licenses for contractors. All contractors are required to carry valid licenses that are issued by the State of Oklahoma." The Building Permits & Inspections page requires permit applicants to submit, along with the company name, address, and phone number, "a copy of the Oklahoma State Contractor's License/Registration Card."
Permit process
For re-roofing permits, applicants email the Building Division the job/service address; the customer's name and phone number; a description of the work performed and type of inspection; and the company name, address, phone number and a copy of the Oklahoma State Contractor's License/Registration Card. Permits may also be submitted in person at City Hall, 200 S. Main St. Residential permits are processed in 3 to 5 days; commercial permits in 10 to 15 days. Inspections are requested by calling 918.376.1542.
Inspections
The city's re-roofing standards require valley linings installed per manufacturer's instructions before shingles are applied (for closed valleys, one ply of smooth roll roofing complying with ASTM D6380, not less than 36 inches wide); a drip edge at eaves and rake edges of shingled roofs, with adjacent segments overlapped not less than 2 inches, extending not less than 1/4 inch below the roof sheathing and not less than 2 inches back onto the roof deck; underlayment installed over the drip edge along eaves and under the underlayment along rake edges; and the drip edge mechanically fastened to the roof deck at intervals not exceeding 12 inches on center.

View the full Owasso permitting authority record →

Impact-resistant roofing materials for Owasso hail

Owasso, Oklahoma sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Class 4 impact-resistant materials

Class 4 Impact-Resistant Shingle Corrugated Metal Panel Metal Shingle Rubber (Polymer) Shingle Standing-Seam Metal Roof Stone-Coated Steel Synthetic Shake Synthetic Slate Synthetic Tile

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Local permitting authority

City of Owasso - Community Development Department, Building Divisioncity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources