The Roofing Book

Home / Roofing by City / Murfreesboro, Tennessee

Roofing in Murfreesboro, Tennessee

Hail belt

No — Murfreesboro, TN does not require a permit for like-for-like roof replacement (City of Murfreesboro Building and Codes Department). Murfreesboro building permits are administered by the Building and Codes Department at City Hall, 111 W. Vine Street. The city's Residential Permits page states residential permit applications may be submitted by email or in person, with roughly 2 weeks allowed for processing; once approved, the applicant is notified of fees and payment options. Building permit and inspection services are also available through the city's online Permit Center. Because Murfreesboro's own R105.2 amendment exempts most roof-covering replacement from the permit requirement (see repair_permit_threshold), a roofer's first practical step is confirming whether the specific job -- deck/framing replacement or not -- actually needs a permit before applying. Where a permit is required, homeowners may pull their own residential permit for their primary residence, but a Tennessee-licensed contractor is required if the property is a rental. Murfreesboro, Tennessee sits in one of the country's most hail-prone regions. This hub aggregates Murfreesboro's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Murfreesboro

Roofing permit and contractor-licensing rules in Murfreesboro are set locally by City of Murfreesboro Building and Codes Department. Tennessee licenses roofing contractors at the state level through the Board for Licensing Contractors under T.C.A. Title 62, Chapter 6, on a two-tier basis — a Home Improvement License covers residential roofing from $3,000 up to $25,000 but exists in only nine counties, and a Building Contractor license is required above that limit — while roofing code content stays local, because T.C.A. 68-120-101 lets a municipality opt out of the state residential code, and Tennessee cities routinely adopt newer editions than the state — always confirm the current requirements with the authority before starting work.

Roofing permit
Not required
Contractor registration
Required
Adopted building code
The City of Murfreesboro adopts the 2018 International Residential Code, including Appendix Chapters D, G, H, J, K and T, by Ordinance 18-O-71, codified at Murfreesboro City Code Sections 7-11 (International Residential Code -- Adopted) and 7-12 (International Residential Code -- Amended). Ordinance 18-O-71 (read in full, all 15 sections and its lettered amendment lists) passed second and final reading January 17, 2019, and by its own Section 15 took effect February 1, 2019 (or 15 days after passage, whichever last occurred). The same ordinance also adopted, in the same instrument, the 2018 International Building Code, 2018 International Existing Building Code, 2018 International Mechanical Code, 2018 International Energy Conservation Code, 2017 National Electrical Code, 2018 International Fire Code, 2018 International Fuel Gas Code, 2018 International Property Maintenance Code, 2018 International Plumbing Code, and 2018 International Swimming Pool and Spa Code, each in its own numbered City Code chapter/section.
Registration details
  • license: STATE-LICENSED, TWO TIERS, PLUS A NARROWER CITY LICENSE FOR ELECTRICAL WORK ONLY. Roofing in Murfreesboro is licensed by the State of Tennessee, not by the city, and Rutherford County is one of the nine counties where the state's lower licensing tier applies. (1) STATE, upper tier -- the Tennessee Board for Licensing Contractors requires a Contractor's License (T.C.A. tit. 62, ch. 6) for "projects of $25,000 or more when acting as a prime contractor, certain subcontractor, or construction manager/consultant," and the Board's own page states subcontractors performing roofing work must be licensed "when contracting directly with a contractor, not the owner... when that portion of the project is $25,000 or more." This applies statewide, including Murfreesboro. (2) STATE, lower tier -- a separate Home Improvement License is required for "residential remodeling projects from $3,000 to $24,999" in nine named counties: "Bradley, Davidson, Hamilton, Haywood, Knox, Marion, Robertson, Rutherford, and Shelby." RUTHERFORD COUNTY, WHICH CONTAINS MURFREESBORO, IS ON THAT LIST, and the Board's own page names "roofing, painting, and other improvements" among the covered work types. So a Murfreesboro roofing job of $3,000 or more triggers a state licence even below the $25,000 general-contractor threshold. Below $3,000 neither state tier is triggered. (3) CITY -- the City of Murfreesboro's own Building and Codes Department licensing page describes only an Electrical license (issued under City Code Section 11-50, administered by the city's Board of Electrical Examiners); it names no separate city roofing-contractor or general-contractor credential. The city's Residential Permits page notes that for rental properties a Tennessee-licensed contractor must obtain the permit.
Permit process
Murfreesboro building permits are administered by the Building and Codes Department at City Hall, 111 W. Vine Street. The city's Residential Permits page states residential permit applications may be submitted by email or in person, with roughly 2 weeks allowed for processing; once approved, the applicant is notified of fees and payment options. Building permit and inspection services are also available through the city's online Permit Center. Because Murfreesboro's own R105.2 amendment exempts most roof-covering replacement from the permit requirement (see repair_permit_threshold), a roofer's first practical step is confirming whether the specific job -- deck/framing replacement or not -- actually needs a permit before applying. Where a permit is required, homeowners may pull their own residential permit for their primary residence, but a Tennessee-licensed contractor is required if the property is a rental.
Inspections
For permitted new residential construction, the Building and Codes Department's Inspection Checklist sets out four inspection stages in order: (1) Foundation -- including erosion-control measures, plumbing-in-slab testing, and footing/steel placement; (2) Framing/Rough-In -- the structure must be "dried-in" (roof covering applied, housewrap on sheathing, exterior doors/windows sealed) with electrical, plumbing, and gas rough-ins complete; (3) Energy Efficiency/Insulation; and (4) Final -- all trade finals complete, grading and erosion protection in place, site clear of debris. Electrical work has its own three-stage sequence (Underground/Slab, Rough-In, Final) scheduled alongside the building inspections. Inspections are requested by phone at 615-893-3750 (8:00 am-4:30 pm) with the permit number and inspection type. For roofing work that does require a permit (deck or framing replacement), the roof-covering step is verified as part of the Framing/Rough-In inspection rather than as a separate roof-only inspection -- see midroof_inspection_required.
Portal
Permit portal

View the full Murfreesboro permitting authority record →

Impact-resistant roofing materials for Murfreesboro hail

Murfreesboro, Tennessee sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Class 4 impact-resistant materials

Class 4 Impact-Resistant Shingle Corrugated Metal Panel Metal Shingle Rubber (Polymer) Shingle Standing-Seam Metal Roof Stone-Coated Steel Synthetic Shake Synthetic Slate Synthetic Tile

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Local permitting authority

City of Murfreesboro Building and Codes Departmentcity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources