The Roofing Book

Home / Roofing by City / Alamogordo, New Mexico

Roofing in Alamogordo, New Mexico

Hail belt

Yes — a permit is required to replace a roof in Alamogordo, NM, issued by New Mexico Construction Industries Division - building permit authority for Alamogordo, New Mexico. A roofing job in Alamogordo runs through two desks, and the split is worth getting right before starting. THE BUILDING PERMIT comes from the New Mexico Construction Industries Division. Applications are taken through the Division's online permitting system and at its offices: Albuquerque, 5500 San Antonio NE, Albuquerque, NM 87109, (505) 222-9800; Las Cruces, 505 S Main, Ste 118, PO Box 939, Las Cruces, NM 88004, (575) 524-6320; and Santa Fe, 2550 Cerrillos Rd, PO Box 25101, Santa Fe, NM 87504, (505) 476-4700. Only a currently licensed contractor may be issued a permit (14.5.2.8.B NMAC), with a homeowner's permit available to an owner working on their own primary residence - but not for a subcontracted single-scope job such as roofing (14.5.2.18.L NMAC). Fees are valuation-based: the Division's guide states that "Valuation of your project is based CID Rules New Mexico Administrative code 14.5.5.10," that "The fee, which covers plan review, the permit notice and required inspections, is based on the valuation amount," and that "Our office will calculate the valuation and fee for you." For an alteration or repair with no structural change, "two sets of lists outlining work to be performed and materials to be used will be accepted in lieu of" full plan sets. Roofing inspections are the decking inspection after tear-off and a final on completion (14.5.2.8.E(3) NMAC); inspections are requested at [email protected], 505-222-9813 or 877-243-0979. THE CITY'S PART is zoning, floodplain, drainage and curb cuts. The Division's guide sets the sequence: "Your project may be located in an area requiring zoning approval from a city or county zoning authority. You must obtain zoning approval and signature on the APPLICATION for STATE BUILDING PERMIT before applying to this office for the building permit." Alamogordo's Planning & Zoning Department publishes the matching steps - review "the N.M.C.I.D. Guide for Residential Construction (PDF)" and complete "the Multi Purpose State Building Application (PDF)"; complete the Flood Map Information Request Form and a separate FEMA site plan; complete the zoning analysis form; review the standard details and complete the Curb Cut Permit Application; complete "the City's Ordinance plan review checklist (PDF)"; complete "the Homeowner's Responsibility Form (PDF) as required by N.M.C.I.D."; and "Bring 2 complete sets of plans AND items Number 2 to 5 above to the Planning and Zoning Department at City Hall for submission. Incomplete or partial submissions will not be accepted." The City warns that "any missing documentation or packet not completed entirely will be returned to the applicant," charges "$85" for the FEMA determination and "$75" for zoning review, notes "These fees do not include State C.I.D. fees," and closes the loop with "When plans are approved, they will be emailed… You may then submit the plans to any of the offices listed at the top of the State permit application." Separately, City Code Sec. 8-01-010(b) requires written approval of a drainage plan from the designated city official before a building or structure is erected, altered, repaired or improved on the residential and commercial property categories it lists, and Sec. 8-01-110 makes City permit fees payable to the city treasurer "in the amount specified in the most recent edition of the applicable city permit fee schedule." CID issues the certificate of occupancy after the final general construction inspection. Alamogordo, New Mexico sits in one of the country's most hail-prone regions. This hub aggregates Alamogordo's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Alamogordo

Roofing permit and contractor-licensing rules in Alamogordo are set locally by New Mexico Construction Industries Division - building permit authority for Alamogordo, New Mexico. New Mexico licenses roofing contractors at the state level through the Construction Industries Division, which issues a dedicated GS-21 “Roofing” classification under 14.6.6 NMAC requiring two years of foreman-level experience — roofing is also authorised inside the general GB-2 residential and GB-98 building classifications, which subsume the specialty scopes — and every CID licensee carries a flat $10,000 statewide surety bond under NMSA 1978 § 60-13-49, with no roofing-specific variance and no dollar threshold below which the licence stops applying; permitting is the part that varies, because New Mexico’s default is state permitting by CID and a city issues its own building permits only while it employs a certified building official — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
The operative residential code in Alamogordo is the state rule, enforced by the state. STATE RULE: the 2021 New Mexico Residential Building Code, 14.7.3 NMAC. 14.7.3.8 provides "This rule adopts by reference the 2021 International Residential Code, as amended by this rule," and 14.7.3.6 states its purpose is "to establish minimum standards for the general construction of residential buildings in New Mexico" - a floor a municipality may add to but never fall below. Its scope at 14.7.3.2 is the reason it governs here directly: "This rule applies to all construction, alteration, relocation, enlargement, replacement, repair, equipment, use and occupancy, location, removal and demolition of all detached one- and two-family dwellings and multiple single-family dwellings (townhouses) not more than three stories high with separate means of egress, and their accessory structures that is performed in New Mexico on or after December 14, 2023, and that is subject to the jurisdiction of CID, unless performed pursuant to a permit for which an application was received by CID before that date." Alamogordo work is subject to the jurisdiction of CID. Under 14.7.3.5 the rule took effect July 14, 2023 and after December 14, 2023 permits may be issued only under it; statutory authority is NMSA 1978 §§ 60-13-9 and 60-13-44. WHAT CID ENFORCES: the Division's own current Building Permit Guide for Residential Construction states "The Construction Industries Division currently enforces the following codes:" and lists "2021 New Mexico Commercial & Residential Building Code," "2021 International Building Code," "2021 International Residential Code," "2012 Solar Energy Code (lAPMO)," "2021 NM Energy Conservation Code," "2017 ICC/ANSI A117.1," "2021 New Mexico Plumbing and Mechanical Code," "2021 Uniform Mechanical Code (lAPMO)," "2021 Uniform Plumbing Code (IAPMO)," "2012 Uniform Swimming Pool, Spa and Hot Tub Code," "2020 New Mexico Electrical Code," "2020 National Electrical Code," "2012 NMESC" and "2012 National Electrical Safety Code." CITY LAYER: Alamogordo does not adopt a competing construction code and no longer adopts the state ones by local ordinance either. Code of Ordinances Article 8-03 (Codes) is now almost entirely reserved; the editor's note records that "Ord. No. 1340, § 1, adopted August 11, 2008, amended the Code by repealing former §§ 8-03-010—8-03-050 and 8-03-070 in their entirety. Former §§ 8-03-010—8-03-050 and 8-03-070 pertained to adoption of the New Mexico Commercial Building Code, the New Mexico Electrical Code, the New Mexico Residential Building Code, the New Mexico Plumbing Code, the New Mexico Mechanical Code and the New Mexico Existing Building Code, respectively." What remains is Sec. 8-03-080, which adopts by reference "the International Property Maintenance Code, 2006 Edition, published by the International Code Council, including any amendments thereto which are adopted by the state," and Sec. 8-03-140 (Compliance required), which routes everything else back to the state: "All construction of any sort or type within the city limits and any building or structure moved into or within the city limits shall fully conform in every respect to the codes and amendments adopted by the state construction industries division of the regulation and licensing department. Any failure to conform shall constitute a violation of these codes and ordinances and shall subject the violator to the penalties as set forth in section 1-01-100." Alamogordo Code of Ordinances Chapter 8 was read in full, Articles 8-01 through 8-08, and contains no residential construction standard of its own - it is permits and drainage, the code official, property maintenance and dangerous buildings, streets, driveways, sidewalks, public works specifications and cross-connection control.
Registration details
  • license: STATE LICENSE, administered by the same agency that issues the Alamogordo building permit - the New Mexico Regulation and Licensing Department's Construction Industries Division (CID), under the Construction Industries Licensing Act, NMSA 1978 ch. 60 art. 13. Roofing has its own dedicated specialty classification. 14.6.6.9 NMAC provides, verbatim: "(12) GS-21. Roofing. Requires two years of foreman level practical or related trade experience. Install, alter or repair roof systems on new or existing roof decks to create a weatherproof and waterproof protective membrane, with or without insulation, using asphalt, pitch, tar, sealants, felt, shakes, shingles, roof tile, slate, urethane or any other approved materials including the preparatory work necessary to bring a roof deck or an existing roof to a condition where roofing can be installed, and sealed or repaired; includes cutting, shaping, fabricating, and installing of sheet metal such as cornices, flashing, skylights (excluding alterations to structural framing), roof coatings, gutters, leaders, rainwater downspouts, pans, prefabricated chimneys, at or near roof lines, metal flues, or doing any part of any combination thereof, which relate to and are incidental to roofing projects." Roofing is also subsumed within the general building classifications, so a general contractor doing roofing inside a larger job does not require a separate GS-21. 14.6.6.9.B provides, verbatim: "(1) GB-2. Residential. Requires two years of foreman level practical or related trade experience. Erect, alter, repair or demolish residences and apartment houses accommodating not more than four family units… includes all work described by the GS specialty classifications, provided the work is limited to residential construction as defined under this provision. (2) GB-98. General building. Requires four years of foreman level practical or related trade experience of which at two years must be commercial experience. Erect, alter, repair or demolish residential and commercial buildings, and certain structures; includes all work authorized by the GB-2, GF-5, GF-7 and GS classifications…" The licence and the permit are linked directly here, because CID controls both: 14.5.2.8.B NMAC provides that "A person who is not appropriately, validly, and currently licensed by the division is not eligible to apply for or be issued a permit." A homeowner may pull a homeowner's permit for their own primary residence instead, but 14.5.2.18.L NMAC closes the obvious loophole for roofing specifically: "Single-scope projects, including but not limited to, roofing or window installations are not eligible for a homeowner's permit if the work is to be subcontracted and is not performed by the homeowner, either personally or with the aid of valid employees who are issued a W-2 form." BOND: NMSA 1978 § 60-13-49 applies to every classification, GS-21 included, with no roofing-specific variance - "B. Proof of responsibility shall be a bond of ten thousand dollars ($10,000) acceptable to the director and underwritten by a corporate surety authorized to transact business in New Mexico." A municipality may not stack a second bond on top of it: NMSA 1978 § 60-13-51 provides "No municipality shall require any person or corporation licensed under the provisions of the Construction Industries Licensing Act to file or obtain as a condition of doing business as a licensed contractor within the municipality any additional license bond as proof of responsibility if the person or corporation has met the responsibility requirements of the commission." INSURANCE: workers' compensation coverage is required under the Workers' Compensation Act, and NMSA 1978 § 60-13-23(I) makes "failure to maintain workers' compensation insurance as required by the Workers' Compensation Act" a ground for revocation or suspension. THRESHOLD: there is no roofing-specific dollar threshold in New Mexico. The only no-licence path is the general casual-work exemption at NMSA 1978 § 60-13-3(D)(14), covering "an individual who works on one undertaking or project at a time that, in the aggregate or singly, does not exceed seven thousand two hundred dollars ($7,200) compensation a year, the work being casual, minor or inconsequential, such as handyman repairs…" - conditioned on the work not being held out as a contracting business (no advertising, annual declaration filed with CID), so it is not a rule that small roofing jobs may be done unlicensed. Owner-builder exemptions at § 60-13-3(D)(10)-(11) cover an individual working on their own owner-occupied dwelling, who must still comply with all codes and obtain all permits. CITY LAYER: Alamogordo licenses no construction trade of its own, but a roofing business with a place of business in the city must register with the City. Code of Ordinances Sec. 17-01-030(a) provides "A business registration fee is hereby charged on each place of business conducted within the municipality which is not otherwise licensed by the municipality. The business registration fee shall be thirty-five dollars ($35.00)," and Sec. 17-01-030(b) requires payment "Prior to engaging in any business," with renewal before expiry accompanied by the fee and "current New Mexico tax identification number." Sec. 17-01-025 makes the point explicitly that City registration does not displace the state licence: "All business registrations and business licenses with the City of Alamogordo are required to maintain any applicable local, state, federal, and other licensing to do business in the city." Sec. 17-01-026 requires approved forms from the planning and zoning department and the Alamogordo Fire Department before the registration application is filed, and Sec. 17-01-035 gives the city clerk two business days to issue once approved. "Place of business" is defined at Sec. 17-01-020 as "Any location within the Alamogordo city limits, building or portion thereof, or premises in which or from which a business is carried on."
Permit process
A roofing job in Alamogordo runs through two desks, and the split is worth getting right before starting. THE BUILDING PERMIT comes from the New Mexico Construction Industries Division. Applications are taken through the Division's online permitting system and at its offices: Albuquerque, 5500 San Antonio NE, Albuquerque, NM 87109, (505) 222-9800; Las Cruces, 505 S Main, Ste 118, PO Box 939, Las Cruces, NM 88004, (575) 524-6320; and Santa Fe, 2550 Cerrillos Rd, PO Box 25101, Santa Fe, NM 87504, (505) 476-4700. Only a currently licensed contractor may be issued a permit (14.5.2.8.B NMAC), with a homeowner's permit available to an owner working on their own primary residence - but not for a subcontracted single-scope job such as roofing (14.5.2.18.L NMAC). Fees are valuation-based: the Division's guide states that "Valuation of your project is based CID Rules New Mexico Administrative code 14.5.5.10," that "The fee, which covers plan review, the permit notice and required inspections, is based on the valuation amount," and that "Our office will calculate the valuation and fee for you." For an alteration or repair with no structural change, "two sets of lists outlining work to be performed and materials to be used will be accepted in lieu of" full plan sets. Roofing inspections are the decking inspection after tear-off and a final on completion (14.5.2.8.E(3) NMAC); inspections are requested at [email protected], 505-222-9813 or 877-243-0979. THE CITY'S PART is zoning, floodplain, drainage and curb cuts. The Division's guide sets the sequence: "Your project may be located in an area requiring zoning approval from a city or county zoning authority. You must obtain zoning approval and signature on the APPLICATION for STATE BUILDING PERMIT before applying to this office for the building permit." Alamogordo's Planning & Zoning Department publishes the matching steps - review "the N.M.C.I.D. Guide for Residential Construction (PDF)" and complete "the Multi Purpose State Building Application (PDF)"; complete the Flood Map Information Request Form and a separate FEMA site plan; complete the zoning analysis form; review the standard details and complete the Curb Cut Permit Application; complete "the City's Ordinance plan review checklist (PDF)"; complete "the Homeowner's Responsibility Form (PDF) as required by N.M.C.I.D."; and "Bring 2 complete sets of plans AND items Number 2 to 5 above to the Planning and Zoning Department at City Hall for submission. Incomplete or partial submissions will not be accepted." The City warns that "any missing documentation or packet not completed entirely will be returned to the applicant," charges "$85" for the FEMA determination and "$75" for zoning review, notes "These fees do not include State C.I.D. fees," and closes the loop with "When plans are approved, they will be emailed… You may then submit the plans to any of the offices listed at the top of the State permit application." Separately, City Code Sec. 8-01-010(b) requires written approval of a drainage plan from the designated city official before a building or structure is erected, altered, repaired or improved on the residential and commercial property categories it lists, and Sec. 8-01-110 makes City permit fees payable to the city treasurer "in the amount specified in the most recent edition of the applicable city permit fee schedule." CID issues the certificate of occupancy after the final general construction inspection.
Portal
Permit portal

View the full Alamogordo permitting authority record →

Impact-resistant roofing materials for Alamogordo hail

Alamogordo, New Mexico sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Class 4 impact-resistant materials

Class 4 Impact-Resistant Shingle Corrugated Metal Panel Metal Shingle Rubber (Polymer) Shingle Standing-Seam Metal Roof Stone-Coated Steel Synthetic Shake Synthetic Slate Synthetic Tile

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Local permitting authority

New Mexico Construction Industries Division - building permit authority for Alamogordo, New Mexicocity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources