The Roofing Book

Home / Roofing by City / Winter Springs, Florida

Roofing in Winter Springs, Florida

Yes, a permit is required to replace a roof in Winter Springs, FL, issued by City of Winter Springs - Building Division. A re-roof in Winter Springs is permit work unless it is under 100 square feet. The City's Roofing Guidelines (rev. 2023) state: "Re-Roof work consisting of less than 100 square foot of work shall not require a permit. However, all work involving contracting between a homeowner and a third party shall be with a state licensed or registered contractor. This permitting threshold exemption does not and should not be construed to authorize unlicensed contracting." The City's Building Permit Application has a "Roof" permit type, asks for the roof covering type and number of squares, and values roof projects on materials: "Shingle $200/Square, Metal $300/Square, Tile $400/Square." The guidelines list the submittal as the "Application for Building Permit – Roof," the Winter Springs Product Approval Form and a contractor registration (new or updated licence and insurance), and require on the job site the roof permit, inspection card, deck nail affidavit (licensed contractors), the City's product approval form, the Florida Product Approval for all roof materials and the product installation instructions. State law makes it "unlawful for any person, firm, corporation, or governmental entity to construct, erect, alter, modify, repair, or demolish any building within this state without first obtaining a permit" (section 553.79(1)(a), Florida Statutes). City Code section 6-88 adds that during hurricane season "building or roofing materials shall not be loaded on a roof earlier than ten (10) working days prior to the permanent installation of the materials.". This hub aggregates roofing permit and contractor-registration requirements for Winter Springs, Florida, along with sourced roofing material references — every fact linked to its directory record.

Roofing permits & building code in Winter Springs

Roofing permit and contractor-licensing rules in Winter Springs are set locally by City of Winter Springs - Building Division. Florida licenses roofing contractors at the state level — a roofing contractor is either certified by the state to work anywhere in Florida or registered to work only where it holds a local certificate of competency — and the Florida Building Code applies statewide, with any local amendment required to be more stringent and filed with the Florida Building Commission — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
Florida Building Code, 8th Edition (2023), Residential volume (2021 International Residential Code base), effective December 31, 2023, adopted statewide by the Florida Building Commission under Rule 61G20-1.001, Florida Administrative Code; section 553.73(6), Florida Statutes, provides that the code and each update "is deemed adopted for use statewide without adoptions by local government." City Code section 6-81 adopts "in its entirety the most recent version of the Florida Building Code, as may be amended from time to time." The City's Building Permit Application lists the effective codes as the Florida Building Codes, 8th Edition; its Roofing Guidelines (rev. 2023) name the 7th Edition and, "effective January 1, 2024 the 8th EDITION 2023." The City's local amendments are administrative (section 6-31, Chapter 1; section 6-32, Chapter 2), local wind speeds (section 6-33) and flood elevation technical amendments (section 6-82, Building 1612.4.3 and Residential R322.2.1); City Code Chapter 6 (read in full) amends nothing in Residential Chapter 9 or Building Chapter 15.
Registration details
  • state_level: Roofing contractor is a separately licensed trade in Florida. Section 489.105(3)(e), Florida Statutes, defines a "Roofing contractor" as "a contractor whose services are unlimited in the roofing trade"; section 489.113(2) provides that a person "must be certified or registered in order to engage in the business of contracting in this state." A state-certified contractor may work statewide; under section 489.117(1)(b), "Registration allows the registrant to engage in contracting only in the counties, municipalities, or development districts where he or she has complied with all local licensing requirements, if any, and only for the type of work covered by the registration." Section 489.103(7) contains an owner-builder exemption for "Owners of property when acting as their own contractor and providing direct, onsite supervision themselves of all work not performed by licensed contractors"; this record does not decide whether a particular reader falls within it.
  • county_level: The City's Contractor Registration Form asks a registered (not state-certified) contractor for a "Seminole County Registration Card (If you are a Registered Contractor)."
  • city_level: The City's Contractor Registration Form (rev. 4-22-14) asks, for a new registration, for general liability insurance "With the City of Winter Springs listed as the Certificate Holder," workers' compensation insurance or exemption, a local business tax receipt and the state licence, and the Roofing Guidelines list a contractor registration "if new or update license and insurance" with each roof permit submittal. The guidelines set separate inspection sequences for owner-builders and licensed contractors doing re-roof work. The local business tax receipt is a general business tax, not a trade credential.
Permit process
A re-roof in Winter Springs is permit work unless it is under 100 square feet. The City's Roofing Guidelines (rev. 2023) state: "Re-Roof work consisting of less than 100 square foot of work shall not require a permit. However, all work involving contracting between a homeowner and a third party shall be with a state licensed or registered contractor. This permitting threshold exemption does not and should not be construed to authorize unlicensed contracting." The City's Building Permit Application has a "Roof" permit type, asks for the roof covering type and number of squares, and values roof projects on materials: "Shingle $200/Square, Metal $300/Square, Tile $400/Square." The guidelines list the submittal as the "Application for Building Permit – Roof," the Winter Springs Product Approval Form and a contractor registration (new or updated licence and insurance), and require on the job site the roof permit, inspection card, deck nail affidavit (licensed contractors), the City's product approval form, the Florida Product Approval for all roof materials and the product installation instructions. State law makes it "unlawful for any person, firm, corporation, or governmental entity to construct, erect, alter, modify, repair, or demolish any building within this state without first obtaining a permit" (section 553.79(1)(a), Florida Statutes). City Code section 6-88 adds that during hurricane season "building or roofing materials shall not be loaded on a roof earlier than ten (10) working days prior to the permanent installation of the materials."
Inspections
The City's Roofing Guidelines: "The inspector may require an additional intermediate inspection between the In-Progress and the Roof Final inspection if sufficient work is not complete at the time of the Dry-In or In-Progress inspection. The inspector may require the removal of some underlayment in order to confirm deck nailing." Shingle installation up to 25 percent at the in-progress inspection "is recommended to allow inspection of shingle nailing." A ladder "must be provided by the contractor or owner/builder" for every inspection, and "Failure to provide access to roof will result in a failed inspection and a re-inspection fee." For licensed contractors, a deck nailing affidavit "will need to be on the jobsite prior to the In-Progress inspection." The City's Re-Roof Inspection Affidavit, signed by the licensed contractor, engineer, architect or Chapter 468 building inspector who inspected the roof deck nailing, flashing and dry-in and roof materials, "must be provided at the job-site prior to final inspection." Inspections are requested online.

View the full Winter Springs permitting authority record →

Roofing materials for Winter Springs

Compare roofing material families — service life, weight, cost band, and durability — for a Winter Springs reroof. Every material entry in the directory carries a cited, dated source.

Start with all roofing materials or the asphalt vs. metal vs. tile comparison.

Local permitting authority

City of Winter Springs - Building Divisioncity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources