The Roofing Book

Home / Roofing by City / Wichita Falls, Texas

Roofing in Wichita Falls, Texas

Hail belt

Yes, a permit is required to replace a roof in Wichita Falls, TX, issued by City of Wichita Falls - Building Inspections Division. The only roof work the City exempts from permit is "Repair of torn shingles or roof patching when no "tear-off" is required and when the area to be repaired is no more than 500 square feet"; a reroof needs a building permit from the Building Inspections Division (1300 7th Street, 940-761-7459), applied for through the City's MGO Connect portal. Permits go to a contractor registered with the City; a homeowner who occupies the house as a permanent residence may take the permit without registering. Fees: "A minimum fee of $47.00 shall be charged for issuing any class of permit required by the building code", plus "Roofing or siding, per square foot of area covered or repaired" at $0.0062 (fee Ordinance No. 47-2025, effective October 1, 2025; its replacement, Ordinance No. 45-2026, passed September 15, 2026 with an effective date of October 1, 2026, prints the same two figures). The City's new-residential permit application and checklist states that "Construction work (including sub-trades) requiring City permits that is initiated without such permits shall be subject to a permit fee twice the normal permit fee and the possibility of citations to the municipal court and/or the revocation of his/her City registration.". Wichita Falls, Texas sits in one of the country's most hail-prone regions. This hub aggregates Wichita Falls's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Wichita Falls

Roofing permit and contractor-licensing rules in Wichita Falls are set locally by City of Wichita Falls - Building Inspections Division. Texas has no mandatory statewide roofing license, so requirements are set at the local level — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
The City of Wichita Falls adopts the 2015 International Residential Code, Chapters 2 through 10, 44 and Appendices F, I and J (Code of Ordinances Sec. 22-700, Ordinance No. 57-2015, passed December 1, 2015; the City's published "Adopted Codes and Amendments" is headed "Effective January 1, 2016, Updated November 22, 2017"). The residential amendments in Sec. 22-701 reach Sections R302.5.1, R313, R317.1, R323 and R703.8.3 and none reaches Chapter 9, Roof Assemblies. The IRC's own Chapter 1 is replaced by the City's Chapter 1, Scope and Administration, which applies to all of the City's technical codes. The City's current new-residential permit application lists the "2015 International Residential Code" among the adopted codes, and the City's later building-code ordinances amend its 2015 editions (Ordinance No. 55-2022, the 2015 International Mechanical Code; Ordinance No. 30-2026, the 2015 International Existing Building Code). The codified Code of Ordinances, hosted by an outside code publisher, could not be opened for this record; the adopting ordinance, the City's compilation and each later Chapter 22 ordinance were read from the City's own ordinance archive. State context: Texas Local Government Code Section 214.212(a) adopts "the International Residential Code, as it existed on May 1, 2012" as a municipal residential building code, and Section 214.212(c) and (e) let a city adopt local amendments by ordinance after a public hearing.
Registration details
  • state_level: Texas issues no state roofing contractor licence; the Texas Department of Licensing and Regulation's program list carries no roofing program.
  • city_level: Section 104.2 of the City's building code: "In order to act as a contractor or to perform work pursuant to a building permit, a person or entity must be registered as a contractor with the building official, and must reregister annually". "Unregistered contractors shall not acquire building permits or continue work on currently issued building permits." Under Section 104.3 a registered contractor seeking a permit for listed work must first furnish a compliance bond, "a statement of whether or not said contractor maintains general liability insurance, and if so, a copy of the certificate of insurance"; the bond table sets "Residential roofing" at $25,000.00 and "Commercial roofing" at $100,000.00. "The annual contractor registration carries no fee." "No contractor registration shall be required to issue a building permit for a residential structure to a homeowner who occupies the property in question as his permanent residence." The City's Application for Contractors Registration states "REGISTRATION EXPIRES ONE YEAR FROM DATE ISSUED", and its $25,000 Code Compliance Bond form covers construction work "including residential roofing, siding, and residential/commercial remodel/renovation."
Permit process
The only roof work the City exempts from permit is "Repair of torn shingles or roof patching when no "tear-off" is required and when the area to be repaired is no more than 500 square feet"; a reroof needs a building permit from the Building Inspections Division (1300 7th Street, 940-761-7459), applied for through the City's MGO Connect portal. Permits go to a contractor registered with the City; a homeowner who occupies the house as a permanent residence may take the permit without registering. Fees: "A minimum fee of $47.00 shall be charged for issuing any class of permit required by the building code", plus "Roofing or siding, per square foot of area covered or repaired" at $0.0062 (fee Ordinance No. 47-2025, effective October 1, 2025; its replacement, Ordinance No. 45-2026, passed September 15, 2026 with an effective date of October 1, 2026, prints the same two figures). The City's new-residential permit application and checklist states that "Construction work (including sub-trades) requiring City permits that is initiated without such permits shall be subject to a permit fee twice the normal permit fee and the possibility of citations to the municipal court and/or the revocation of his/her City registration."
Portal
Permit portal

View the full Wichita Falls permitting authority record →

Roofing suppliers in Wichita Falls

4 roofing distributor branches serving Wichita Falls are cataloged in the directory:

Roofing suppliers in Wichita Falls

ABC Supply Co., Inc.ABC Supply - Wichita Falls, TX Gulfeagle SupplyGulfeagle Supply - Wichita Falls, TX Metal Center, Inc.Metal Center - Wichita Falls QXOQXO - Wichita Falls, TX

All roofing suppliers in Wichita Falls →

Impact-resistant roofing materials for Wichita Falls hail

Wichita Falls, Texas sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Class 4 impact-resistant materials

Class 4 Impact-Resistant Shingle Corrugated Metal Panel Metal Shingle Rubber (Polymer) Shingle Standing-Seam Metal Roof Stone-Coated Steel Synthetic Shake Synthetic Slate Synthetic Tile

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Local permitting authority

City of Wichita Falls - Building Inspections Divisioncity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources