The Roofing Book

Home / Roofing by City / Shaker Heights, Ohio

Roofing in Shaker Heights, Ohio

Hail belt

Yes, a permit is required to replace a roof in Shaker Heights, OH, issued by City of Shaker Heights - Building & Housing Department. Shaker Heights, Ohio sits in one of the country's most hail-prone regions. This hub aggregates Shaker Heights's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Shaker Heights

Roofing permit and contractor-licensing rules in Shaker Heights are set locally by City of Shaker Heights - Building & Housing Department. Ohio issues no state roofing licence — the Ohio Construction Industry Licensing Board licenses only heating/ventilating/air conditioning, refrigeration, electrical, plumbing and hydronics contractors under O.R.C. 4740.01, and roofing is not among them — so any roofing credential is a city or county one, while the Residential Code of Ohio applies statewide under O.R.C. 3781.11 and a city may add its own non-conflicting requirements on top through the Board of Building Standards procedure in O.R.C. 3781.01 — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
The Residential Code of Ohio (RCO), Ohio Administrative Code Division 4101:8, adopted by the Ohio Board of Building Standards, governs one-, two- and three-family dwellings statewide; its roof assemblies rule (OAC 4101:8-9-01) and administration rule (OAC 4101:8-1-01) carry an effective date of July 1, 2019. Ohio Rev. Code 3781.01(B) provides that the state residential building code "does not prevent a local governing authority from adopting additional regulations governing residential structures that do not conflict with the state residential building code". Under RCO 101.5, where no building department certified by the Board of Building Standards for residential buildings has jurisdiction, "the owner is not required to make submission of construction documents, seek approvals, request inspections, or obtain certificates of occupancy". In Shaker Heights, the Building & Housing Department is the gateway for all construction activity and property maintenance inspections in the city. The department states that it "has both Residential and Commercial Building certifications as recognized by the Ohio Board of Building Standards". This record did not read Shaker Heights's own codified ordinances, so any additional local building regulation is not reflected here.
Portal
Permit portal

View the full Shaker Heights permitting authority record →

Impact-resistant roofing materials for Shaker Heights hail

Shaker Heights, Ohio sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Class 4 impact-resistant materials

Class 4 Impact-Resistant Shingle Corrugated Metal Panel Metal Shingle Rubber (Polymer) Shingle Standing-Seam Metal Roof Stone-Coated Steel Synthetic Shake Synthetic Slate Synthetic Tile

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Local permitting authority

City of Shaker Heights - Building & Housing Departmentcity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources