Home / Roofing by City / Pleasant Prairie, Wisconsin

Roofing in Pleasant Prairie, Wisconsin

Hail belt

Yes — a permit is required to replace a roof in Pleasant Prairie, WI, issued by Village of Pleasant Prairie, Wisconsin - Building Inspection Department. Permits are taken out at the Building Inspection Department, Village Hall, 9915 39th Avenue, on 262-694-9304 or [email protected]; the office runs Monday to Friday 7:30 a.m. to 4:30 p.m. The Village states its inspection scheduling rule plainly and it is longer notice than most: "All building inspections must be called in to schedule appointment (AM/PM) 2 business days in advance," and the roofing application repeats it. Ordinance section 370-11 lists the preconditions to issuing any permit, and two of them catch people out on small jobs: all unpaid overdue forfeitures owed by the applicant or the property owner must be paid first, and all outstanding building or zoning violations on the property must be cured first, unless either is under appeal. The application must be signed by the owner and the licensed contractor where applicable. Section 370-14 lets the inspector suspend a permit and issue a stop-work order where the work departs from the permit, and revoke it if the problem is not cured; work under a revoked or voided permit is itself a violation, and a revoked permit means a fresh application and a fresh fee "as if the project was starting anew." The 2026 fee schedule prices the mistakes as well as the work: re-inspection 60 dollars, failure to call for an inspection 60 dollars, overtime inspection 90 dollars, renewal of a permit 50 percent of the original fee, and a 60 dollar minimum building permit fee. Pleasant Prairie, Wisconsin sits in one of the country's most hail-prone regions. This hub aggregates Pleasant Prairie's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Pleasant Prairie

Roofing permit and contractor-licensing rules in Pleasant Prairie are set locally by Village of Pleasant Prairie, Wisconsin - Building Inspection Department. Wisconsin requires a state credential before a residential building permit can be issued — under Wis. Admin. Code SPS 305.31 the permit applicant must hold a Department of Safety and Professional Services Dwelling Contractor or Dwelling Contractor-Restricted certification — and the state Uniform Dwelling Code governs one- and two-family construction statewide, so a city sets its own permit administration rather than its own roofing-code provisions — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
STATE CODE, ADOPTED INSIDE THE VILLAGE BUILDING AND MECHANICAL CODE. One- and two-family dwellings in Pleasant Prairie are built to the Wisconsin Uniform Dwelling Code, chs. SPS 320 to 325 of the Wisconsin Administrative Code. That code is Wisconsin's own text rather than an adoption of the International Residential Code, which is why its roofing rules read differently from the IRC and why no IRC edition year applies to a house here. The local instrument is Chapter 370 of the Village Code, the "Village of Pleasant Prairie Building and Mechanical Code". Section 370-7 adopts, among others, "The Wisconsin Uniform Dwelling Code, Chs. SPS 320 to 325, Wis. Adm. Code, and all amendments thereto," the smoke and carbon monoxide detector chapter SPS 328, the Wisconsin Electrical Code SPS 316, the Wisconsin Plumbing Code SPS 381 to 387, the Existing Buildings Code SPS 366 and the Commercial Building Code SPS 361 to 366. The adoption floats rather than freezing an edition, since it takes "all amendments thereto." Section 370-1 grounds the chapter in Wis. Stat. 101.65 among others, and section 370-2 states the aim as maintaining "the required local uniformity with the administrative and technical requirements of this chapter". One structural fact worth knowing: section 370-10 records that on March 27, 2000 the Wisconsin Department of Safety and Professional Services certified the Village as a certified municipality to examine commercial building plans and perform inspections, with jurisdiction over new buildings under 50,000 cubic feet and alterations under 100,000 cubic feet, and the Village may waive that jurisdiction to the state on a specific project. Chapter 370 was read in full, all twenty-eight sections, and it adds no roof-assembly requirement of its own. The chapter was adopted 6-4-2001 by Ordinance No. 01-21, amended in its entirety 8-4-2014 by Ordinance No. 14-26 and substantially amended 8-17-2020 by Ordinance No. 20-11; the codification includes legislation through May 11, 2026.
Registration details
  • license: A PAIR OF STATE CREDENTIALS, WRITTEN INTO THE VILLAGE CODE BY CHAPTER NUMBER. State level: Wisconsin requires a contractor credential to obtain a building permit for a one- or two-family dwelling. The contracting business must hold a Dwelling Contractor certification from the Department of Safety and Professional Services, which rests on proof of financial responsibility - a bond or liability insurance, plus worker's compensation and unemployment insurance statements - and must hold or employ someone holding a Dwelling Contractor Qualifier certification, which requires at least 12 hours of approved coursework in construction law, construction codes and construction business practices. A restricted version of the certification is issued to an applicant bonding under 25,000 dollars; that is a bond-size distinction, not a narrower scope of work. There is no separate roofing licence in Wisconsin - a roofer holds the same dwelling contractor credential a framer or a siding contractor holds. An owner who resides or will reside in the dwelling and pulls the permit personally is exempt. Note that the state requirement is written as a condition on obtaining a building permit, and Wisconsin has not settled whether a like-for-like reroof needs a uniform dwelling code permit at all, so ask before assuming it is triggered on a job the municipality does not permit. The certification reaches houses of every vintage: Wis. Stat. 101.615(3) applies the certification sections to a permit application to perform work on a dwelling whose initial construction commenced before, on or after December 1, 1978, so the age carve-out that limits the construction standards does not limit the credential. Village level: Pleasant Prairie issues no roofing credential of its own and points straight at the state scheme. Municipal Code section 370-8A reads, in its entirety, "State license required per Ch. SPS 305, Wis. Adm. Code." Section 370-8B then sets out the owner-occupant position: the licence requirement does not apply to an owner-occupant doing their own work, and the Village adds the point roofers should note - "This does not exempt the owner-occupant from permit requirements." Nine kinds of work are excluded from that owner-occupant allowance, none of them roofing: new electrical service, electrical service upgrade, photovoltaic system, automatic standby generator, sanitary lateral, water lateral, storm lateral, pool and hot tub. Section 370-11A(1) requires a permit application to be signed by the owner and the licensed contractor where applicable, and the Roofing/Siding Application has separate signature blocks for the property owner and the contractor, with a Property Owner Cautionary Statement required where the owner acts as their own contractor. Chapter 370 was read in full and creates no Village contractor registration, no Village roofing licence and no local bond for a roofer.
Permit process
Permits are taken out at the Building Inspection Department, Village Hall, 9915 39th Avenue, on 262-694-9304 or [email protected]; the office runs Monday to Friday 7:30 a.m. to 4:30 p.m. The Village states its inspection scheduling rule plainly and it is longer notice than most: "All building inspections must be called in to schedule appointment (AM/PM) 2 business days in advance," and the roofing application repeats it. Ordinance section 370-11 lists the preconditions to issuing any permit, and two of them catch people out on small jobs: all unpaid overdue forfeitures owed by the applicant or the property owner must be paid first, and all outstanding building or zoning violations on the property must be cured first, unless either is under appeal. The application must be signed by the owner and the licensed contractor where applicable. Section 370-14 lets the inspector suspend a permit and issue a stop-work order where the work departs from the permit, and revoke it if the problem is not cured; work under a revoked or voided permit is itself a violation, and a revoked permit means a fresh application and a fresh fee "as if the project was starting anew." The 2026 fee schedule prices the mistakes as well as the work: re-inspection 60 dollars, failure to call for an inspection 60 dollars, overtime inspection 90 dollars, renewal of a permit 50 percent of the original fee, and a 60 dollar minimum building permit fee.

View the full Pleasant Prairie permitting authority record →

Impact-resistant roofing materials for Pleasant Prairie hail

Pleasant Prairie, Wisconsin sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Sources