Roofing in Pierce, Colorado

Required

The Town's Design Criteria page states the Town of Pierce has adopted, for residential construction, the 2024 International Residential Code, 2024 Energy Conservation Code, and 2023 National Electrical Code; for commercial construction, the 2024 International Building, Plumbing, Mechanical, Fuel Gas, and Energy Codes plus the 2023 National Electrical Code and 2024 Pool and Spa Code; and, as other adopted codes, the 2024 International Property Maintenance Code and 2024 International Existing Building Code, alongside state Electric Ready/Solar Ready/EV Ready requirements. The same page lists a 115 mph ultimate design wind speed, Seismic Design Category B, 30 psf roof live load/15 psf dead load, and "Ice and water shield required" and "Under-floor protection required" as special construction requirements -- matching the design-criteria sheets published by the neighboring Town of Ault essentially verbatim. This is a newer edition than the "2018 IRC Re-Roof Guide" and "2020 NEC" document titles still listed as Supporting Documents on the Building Permits page.

The Building Permits page's FAQ states, under "WHEN IS A BUILDING PERMIT REQUIRED?", a list of projects that typically require a permit, including: "New buildings (including agricultural buildings), Additions, Decks, Patio Covers and Carports, Storage sheds and Pole Barns, Re-roofing, Fences over 6 feet in height, Pools over 5000 gallons, hot tubs and spas..." plus garages, HVAC installation/replacement, solar panels, gas piping over 10 feet, demolitions, boiler/gas log/water-heater work, and interior renovations. The page also states: "Work without a permit is illegal and can pose serious complications for you when you try to sell your house[;] any fire and homeowners insurance you have may be invalidated if you do work without a permit." Services offered are described as Permit Issuance, Inspections (performed by SAFEbuilt inspectors), Plan Review (by SAFEbuilt plan reviewers), and Guidance and Support. Permits become null and void if work is not ready for a first inspection within 180 days of issuance, or if more than 180 days elapses between inspections or work substantially ceases; a re-inspection fee applies if an inspection is requested before the work or site is ready. Supporting homeowner guides listed include a "2018 IRC Re-Roof Guide," Accessory Structures, Decks, Home Additions, Pole Barns, Swimming Pools, Basement Finish, Patio Covers/Carports, Window Replacement guides, and a "2020 NEC - Significant Changes Residential" sheet, alongside a 2021 Commercial Submittal Checklist -- these document titles cite older code editions than the Town's current Design Criteria page (2024 codes; see adopted_code), suggesting the guide documents may not yet be updated to match.

Inspections are scheduled by contacting SAFEbuilt Inc. at 970-674-1036 or 1-866-671-1036; requests called in before 7:30 a.m. receive a same-day inspection, and later requests are scheduled for the next working day. The building permit and approved stamped plans (including foundation and truss designs) must be on the job site for all inspections, and work may not proceed until the inspector signs the permit card. All concrete reinforcing steel must be in place before an inspection, and lot corners must be clearly staked for setback inspections. Failure to request final inspection and meet all conditions will prohibit issuance of a Certificate of Occupancy.