The Roofing Book

Home / Roofing by City / Pharr, Texas

Roofing in Pharr, Texas

Hail belt

Yes, a permit is required to replace a roof in Pharr, TX, issued by City of Pharr Building and Code Compliance Department, Building Safety. Pharr, Texas sits in one of the country's most hail-prone regions. This hub aggregates Pharr's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Pharr

Roofing permit and contractor-licensing rules in Pharr are set locally by City of Pharr Building and Code Compliance Department, Building Safety. Texas has no mandatory statewide roofing license, so requirements are set at the local level — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
TWO CODIFIED INTERNATIONAL RESIDENTIAL CODE ADOPTIONS, NAMING DIFFERENT EDITIONS. In Chapter 22 of the Code of Ordinances (codified through Ordinance No. O-2025-35, September 15, 2025), Article III, Sec. 22-61 "City of Pharr Development and Maintenance Codes adopted" lists the "2018 International Residential Code to include Appendices A through Q, excluding L and I", alongside the 2018 International Building, Energy Conservation, Plumbing, Swimming Pool and Spa, Fuel Gas, Existing Building, Property Maintenance and Fire Codes and the 2017 National Electrical Code; its history note ends with Ord. No. O-2021-41, dated 8-2-21. Article XIII, Sec. 22-501 "Residential code adopted" reads: "The International Residential Code, 2012 Edition or the most recent edition, with Appendixes A through Q, excluding L and I, is adopted as the residential code of the city, and shall be known as the City of Pharr Residential Code." Its history note cites Ord. Nos. O-2000-45, O-2003-48 and O-2013-32. The existing building code shows the same split: Sec. 22-61 lists the "2018 International Existing Building Code", while Sec. 22-66(a) adopts "the International Existing Building Code, 2012 edition", amended by Sec. 22-66(b) at Sections 101.1 and 1201.2. Separately, Sec. 22-62(b)(2)a., on moving permits for a used house older than five years, states: "The house must comply with the 2018 International Residential Code." Article III (Secs. 22-61 through 22-66) and Article XIII (Secs. 22-501 and 22-502) were read in full, and no section in either names roofs, roof coverings or reroofing. The City's Building Safety page names no code edition. This record does not decide which adoption applies to a reroof, so it publishes no edition-dependent answer on drip edge, impact rating, layer limit, sheathing or underlayment.
Registration details
  • city_level: A CITY CONTRACTOR LICENSE WITH ITS OWN BOND-OR-INSURANCE CONDITION AND AN ANNUAL FEE. Sec. 22-62(g) of the Code of Ordinances provides: "It shall be the duty of every contractor or builder who makes contracts for the construction or repairs of buildings or structures for which a permit is required to submit to the building safety division a license and permit bond in the amount of $5,000.00 or a $100,000.00 general liability insurance and pay license fee of $50.00 annually." It defines a contractor or builder as "a person who makes contract for construction purposes and makes his/her livelihood in the construction business," and states that the license "may be revoked by the development services director upon complaint from the building official for violation of said code." The City's fee ordinance No. O-2022-43, Exhibit "A", item 14 "Registration of Contractors (Annual Registration Fee)", lists "General Contractor" at $100.00 with a "$75.00 annual renewal fee"; its contractor list names no separate roofing category. The City's FAQ answers "Can a contractor pull the building permit?" with: "Yes, however they must register with the city and pay a $100.00 general contractor registration."

View the full Pharr permitting authority record →

Impact-resistant roofing materials for Pharr hail

Pharr, Texas sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Class 4 impact-resistant materials

Class 4 Impact-Resistant Shingle Corrugated Metal Panel Metal Shingle Rubber (Polymer) Shingle Standing-Seam Metal Roof Stone-Coated Steel Synthetic Shake Synthetic Slate Synthetic Tile

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Local permitting authority

City of Pharr Building and Code Compliance Department, Building Safetycity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources