Home / Roofing by City / Irving, Texas
Roofing in Irving, Texas
Hail belt
Irving, Texas sits in one of the country's most hail-prone regions. This hub aggregates Irving's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.
Roofing permits & building code in Irving
Roofing permit and contractor-licensing rules in Irving are set locally by City of Irving - Inspections Department. Texas has no mandatory statewide roofing license, so requirements are set at the local level — always confirm the current requirements with the authority before starting work.
Contractor registration
Required
Adopted building code
"Residential roofing requirements can be found in the 2021 International Residential Code," per the city's Building Inspections page, which links the 2021 IRC Re-Roof Chapter 9 and Table R503 re-roofing documents. The same page carries a notice of proposed ordinances for adopting the 2024 International Codes, so the adopted editions may change.
Permit process
Per the city's Residential Roof Guidelines handout: "As a measure to ensure the safety of a home, the City of Irving requires a building permit on all re-roofing projects. All contractors who perform this type of work shall be registered with the City and a building permit shall be applied for and issued prior to the start of work." Roof repairs of one hundred (100) square feet or less do not require a permit. Reroofing is listed among residential permit types that do not require plans, and permits are applied for and paid through the city's MGO Connect online portal.
Inspections
The final roof inspection verifies the roofing project is complete, that the installation complies with the most currently adopted codes and ordinances, and that all construction debris has been removed from the site. It is the responsibility of the roofing contractor and/or homeowner to ensure vent piping penetrates the roof, that proper clearances are maintained around appliance vents, and that all appliance vents are properly connected.
View the full Irving permitting authority record →
Impact-resistant roofing materials for Irving hail
Irving, Texas sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:
Class 4 impact-resistant materials
Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.
Local permitting authority
Roofing guides