Roofing in Gilcrest, Colorado

Required

No standalone "adopted codes" page was found on the Town's site. The Town's re-roofing guide is titled "2018 IRC Residential Re-roofing" and cites IRC Sections R806 (Roof Ventilation) and R908 (Reroofing) by number, indicating the 2018 International Residential Code was the edition in force as of that document's 5.10.2019 publication date (the same generic SAFEbuilt template, updated to reference the 2024 IRC, is now in use in neighboring Ault, Kersey, and Pierce, so Gilcrest's 2018 citation may be stale). The Building Inspection and Plan Review Fees Handout separately bases its general building-permit fee table on "Table 1A of the 97 Uniform Building Code" (a 1997-edition fee table, not necessarily the currently adopted building code) and Colorado Revised Statutes 12-23-117 for electrical-inspection fee caps.

The Town's Forms page states: "The Town of Gilcrest has various licenses and permits that are required depending on what you are requesting," and lists a "BUILDING PERMIT & GUIDES" category containing a Building Permit Application, a Small Fence Permit, a Mobile Home Permit Handout & Procedures, and homeowner guides for Accessory Structures, Decks, Home Additions, Patio Covers/Carports, Pole Barns, Re-Roofing, Swimming Pools, and Window Replacement (all labeled "2018 IRC" or "2018"), plus the "Town of Gilcrest Building Inspection and Plan Review Fees Handout." That fees handout lists a "Single Stop Projects Fee Schedule" with a dedicated "Roof (re-shingle) $60.00" line, alongside Furnace/Air Conditioner ($70), Water Heater ($60), Lawn Sprinkler System ($60), Siding or Window Replacement ($70), Sales Trailers/Modular Units ($75), and Demolition; a general Building Permit Fee is based on "Table 1A of the 97 Uniform Building Code" with Plan Check Fee at 30% of the permit fee, project valuations per "the most current Building Valuation Data published by the International Code Council," a Reinspection Fee of $75, and Investigation Fee of 50% of the permit fee. The Re-Roof Guide itself (published by SAFEbuilt, Inc.) states in FAQ form: "Why do I need a permit to re-roof my house? Your permit allows the building department to inspect for potential hazards and unsafe construction..."; confirms a homeowner may self-perform the re-roof; requires a Final Roof inspection (a mid-roof inspection may also be required, per the Building Department); limits roofing to no more than two layers; allows properly-used nail guns; and requires deteriorated roof jacks/vents to be replaced. The guide instructs re-roof permit holders to "check with your jurisdiction for Ice & Water Shield requirements" rather than stating a fixed rule, unlike the newer SAFEbuilt guide templates used by some neighboring Weld towns.

The Re-Roof Guide (published by SAFEbuilt, Inc., the same contractor used for building inspections in several neighboring Weld County towns) instructs permit holders to "call the inspection line listed on your permit card" to schedule a required Final Roof inspection, and to check with the jurisdiction on whether the contractor or the inspector provides a ladder for the inspection. Tile, metal, or other roofing exceeding 7.5 lb/sq ft may require an additional mid-roof inspection and an on-site copy of the manufacturer's specifications.