The Roofing Book

Home / Roofing by City / Ellisville, Missouri

Roofing in Ellisville, Missouri

Hail belt

No, Ellisville, MO does not require a permit for like-for-like roof replacement (City of Ellisville Engineering Department). The City's Roof Repairs letter, dated November 23, 2016, says "The City does not require permits for roofs unless the work is structural in nature." The Permits & Inspections page says the Engineering Department "performs building and plumbing inspections on all work requiring permits within the corporate limits of the City of Ellisville," and that electrical and mechanical permits are issued through St. Louis County. Ellisville, Missouri sits in one of the country's most hail-prone regions. This hub aggregates Ellisville's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Ellisville

Roofing permit and contractor-licensing rules in Ellisville are set locally by City of Ellisville Engineering Department. Missouri has no statewide roofing or general-contractor license, so licensing and registration are handled at the local level — always confirm the current requirements with the authority before starting work.

Roofing permit
Not required
Adopted building code
THE 2015 INTERNATIONAL RESIDENTIAL CODE, PER THE CITY'S OWN PAGES. The Permits & Inspections page says the Engineering Department reviews plans "in accordance with the 2015 International Code Council (ICC) Building Code, The 2015 ICC Code for single- and two-family dwelling units and the 2015 ICC Plumbing Code." The City's Roof Repairs letter, dated November 23, 2016, says "We are currently under the 2015 IRC, and Table R301.2 (1) was adopted as indicated, and no other sections in Chapter 9 were modified." That letter predates this listing, and the adopting ordinance and the City's current municipal code were not read, so this record does not state whether later amendments exist. Missouri law leaves building codes to local adoption: RSMo 67.280 provides that a community "may adopt or repeal an ordinance which incorporates by reference the provisions of any code."
Permit process
The City's Roof Repairs letter, dated November 23, 2016, says "The City does not require permits for roofs unless the work is structural in nature." The Permits & Inspections page says the Engineering Department "performs building and plumbing inspections on all work requiring permits within the corporate limits of the City of Ellisville," and that electrical and mechanical permits are issued through St. Louis County.

View the full Ellisville permitting authority record →

Impact-resistant roofing materials for Ellisville hail

Ellisville, Missouri sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Class 4 impact-resistant materials

Class 4 Impact-Resistant Shingle Corrugated Metal Panel Metal Shingle Rubber (Polymer) Shingle Standing-Seam Metal Roof Stone-Coated Steel Synthetic Shake Synthetic Slate Synthetic Tile

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Local permitting authority

City of Ellisville Engineering Departmentcity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources