The Roofing Book

Home / Roofing by City / Daytona Beach, Florida

Roofing in Daytona Beach, Florida

Yes, a permit is required to replace a roof in Daytona Beach, FL, issued by City of Daytona Beach - Permits and Licensing Division. Re-roofing is permit work in Daytona Beach. The City's 2025-2026 Fee Schedule carries a dedicated "Re-roofing" fee section (residential asphalt/fiberglass shingle: $97.65 minimum fee and $3.25 per square; residential metal, shake, tile or flat roofs: $7.25 per square), and all construction permit fees carry a 10% technology surcharge. The City's Building Permit Application ("Inclusive of Electrical, Mechanical, Plumbing/Gas & Roofing") has a "ROOFING INFORMATION" block with Work Type "New Roof Re-roof Repair," a valuation line and sloped, flat and total squares, and names a "ROOFING CONTRACTOR" with a state/county license number. The City's Submittal Forms page lists the "Roof Supplement (PDF) (required for all roofs and re-roofs)"; the City of Daytona Beach Roof Supplemental Form asks for the work type (New Roof, Re-Roof, Roof-Over or Repair), the roof deck type, squares, slope, deck nailing (approximately 6 inches on center), underlayment layers, and a Florida Product Approval number or Miami-Dade NOA for each underlayment and roof covering, and states: "It is up to the contractor to use products which comply with the Current Florida Building Code. These products include such items as drip edge, flashing, valley material, skylights, vents, fasteners, etc." Permits are applied for through the City's online iMS permit services. The application warns that "A NOTICE OF COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION." Under the Land Development Code, "Every construction permit shall become null and void if the construction authorized by the permit is not started and a valid inspection approval is not obtained within six months after the date of issuance of the permit," and "Any person who commences work without having first obtained all required construction permits will be assessed a penalty as provided in the fee schedule" (the fee schedule lists "Working without permits, $112.75 or double permit fee, whichever is greater"). In a Historic Overlay district, the Land Development Code lists "The replacement of a roof with one of the same material and color" as an example of work needing a Minor Certificate of Appropriateness. Since July 1, 2026, state law requires the City to exempt single-family work valued at less than $7,500 on written request (not in a flood hazard area, and not electrical, plumbing, structural, mechanical or gas work); see the repair threshold field. This hub aggregates roofing permit and contractor-registration requirements for Daytona Beach, Florida, along with sourced roofing material references — every fact linked to its directory record.

Roofing permits & building code in Daytona Beach

Roofing permit and contractor-licensing rules in Daytona Beach are set locally by City of Daytona Beach - Permits and Licensing Division. Florida licenses roofing contractors at the state level — a roofing contractor is either certified by the state to work anywhere in Florida or registered to work only where it holds a local certificate of competency — and the Florida Building Code applies statewide, with any local amendment required to be more stringent and filed with the Florida Building Commission — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
Florida Building Code, 8th Edition (2023), Residential volume (2021 International Residential Code base), effective December 31, 2023, adopted statewide by the Florida Building Commission under Rule 61G20-1.001, Florida Administrative Code. The City's Land Development Code (section 9.1.A) provides that "The Florida Building Code, as referenced in F.S. § 553.73, with the local amendments set forth in subsection B below, is hereby adopted by reference, including all codes incorporated therein and including all revisions that may from time to time be made by administrative rules promulgated by the Florida Building Commission in accordance with F.S. ch. 553." The City's local amendments (section 9.1.C, Ord. Nos. 16-26, 16-282 and 2022-238) are floodplain amendments only: the residential elevation requirements of section R322 and the definition of "Substantial Improvement" in the Building and Existing Building volumes. They do not touch the roofing chapters. The City's Single Family Home Submittal Checklist (June 2024) calls for construction plans "to meet the requirements of section R301, 2023 FBC 8th Edition, Residential."
Registration details
  • state_level: Roofing contractor is a separately licensed trade in Florida. Section 489.105(3)(e), Florida Statutes, defines a "Roofing contractor" as "a contractor whose services are unlimited in the roofing trade." Section 489.113(2) provides that "A person must be certified or registered in order to engage in the business of contracting in this state." A state-certified contractor may work statewide; under section 489.117, "Registration allows the registrant to engage in contracting only in the counties, municipalities, or development districts where he or she has complied with all local licensing requirements, if any, and only for the type of work covered by the registration." Section 489.103(7) contains an owner-builder exemption for owners "acting as their own contractor and providing direct, onsite supervision themselves of all work not performed by licensed contractors" on one- or two-family residences for their own use or occupancy and not offered for sale or lease; this record does not decide whether a particular reader falls within it.
  • city_level: The City's Building Permit Application lists a "ROOFING CONTRACTOR" with a "STATE/COUNTY LICENSE NO." and is signed either as "Owner/Builder (must personally appear in office and sign)" or "Contractor (license holder)." Where someone else pulls the permit, the City's Permit Authorization form has the license holder authorize that person "to obtain a permit(s) on my behalf, under my license", with Roofing among the permit types, and states "I understand as the license holder I am required to sign the permit application." Owner-builders sign the City's Owner-Builder Affidavit of Acknowledgment and Disclosure Statement, which recites that "state law requires construction to be done by a licensed contractor" and that the owner has "applied for an owner-builder permit under an exemption from the law," that the owner "must provide direct, onsite supervision of the construction," and that "a contractor is required by law to be licensed in Florida and to list his or her license numbers on permits and contracts." Separately, "To conduct business in the City of Daytona Beach, you must have a city-issued business tax receipt," applied for with a Department of Business and Professional Regulation "license or certificate (if applicable)"; the business tax receipt is a tax, not a contractor licence.
Permit process
Re-roofing is permit work in Daytona Beach. The City's 2025-2026 Fee Schedule carries a dedicated "Re-roofing" fee section (residential asphalt/fiberglass shingle: $97.65 minimum fee and $3.25 per square; residential metal, shake, tile or flat roofs: $7.25 per square), and all construction permit fees carry a 10% technology surcharge. The City's Building Permit Application ("Inclusive of Electrical, Mechanical, Plumbing/Gas & Roofing") has a "ROOFING INFORMATION" block with Work Type "New Roof Re-roof Repair," a valuation line and sloped, flat and total squares, and names a "ROOFING CONTRACTOR" with a state/county license number. The City's Submittal Forms page lists the "Roof Supplement (PDF) (required for all roofs and re-roofs)"; the City of Daytona Beach Roof Supplemental Form asks for the work type (New Roof, Re-Roof, Roof-Over or Repair), the roof deck type, squares, slope, deck nailing (approximately 6 inches on center), underlayment layers, and a Florida Product Approval number or Miami-Dade NOA for each underlayment and roof covering, and states: "It is up to the contractor to use products which comply with the Current Florida Building Code. These products include such items as drip edge, flashing, valley material, skylights, vents, fasteners, etc." Permits are applied for through the City's online iMS permit services. The application warns that "A NOTICE OF COMMENCEMENT MUST BE RECORDED AND POSTED ON THE JOB SITE BEFORE THE FIRST INSPECTION." Under the Land Development Code, "Every construction permit shall become null and void if the construction authorized by the permit is not started and a valid inspection approval is not obtained within six months after the date of issuance of the permit," and "Any person who commences work without having first obtained all required construction permits will be assessed a penalty as provided in the fee schedule" (the fee schedule lists "Working without permits, $112.75 or double permit fee, whichever is greater"). In a Historic Overlay district, the Land Development Code lists "The replacement of a roof with one of the same material and color" as an example of work needing a Minor Certificate of Appropriateness. Since July 1, 2026, state law requires the City to exempt single-family work valued at less than $7,500 on written request (not in a flood hazard area, and not electrical, plumbing, structural, mechanical or gas work); see the repair threshold field.
Inspections
The City's 3-Digit Inspection List names the roofing inspections by code: 122 Roof Sheathing; 123 Pre-ReRoof (if covering an existing roof); 125 Roof Dry In-Flashing and/or In Progress; and 187 Final Roof. Where roof deck re-nailing is certified by affidavit, the City's Roof Inspection Affidavit ("only when applicable") is sworn by a licensed contractor, engineer, architect or Chapter 468 building inspector who "did personally inspect the roof deck nailing work" and determined "the installation was done according to the Hurricane Mitigation Retrofit Manual (Based on 553.844 F.S.)." Reinspections are charged under the City's fee schedule ("Re-inspection fee shall be $56.35").
Portal
Permit portal

View the full Daytona Beach permitting authority record →

Roofing suppliers in Daytona Beach

1 roofing distributor branch serving Daytona Beach are cataloged in the directory:

Roofing suppliers in Daytona Beach

ABC Supply Co., Inc.ABC Supply - Daytona Beach, FL

All roofing suppliers in Daytona Beach →

Roofing materials for Daytona Beach

Compare roofing material families — service life, weight, cost band, and durability — for a Daytona Beach reroof. Every material entry in the directory carries a cited, dated source.

Start with all roofing materials or the asphalt vs. metal vs. tile comparison.

Local permitting authority

City of Daytona Beach - Permits and Licensing Divisioncity

Roofing guides

Class 4 Impact-Resistant ShinglesGuide Asphalt vs. Metal vs. TileGuide Wind & Fire RatingsGuide

Sources