Home / Roofing by City / Burnsville, Minnesota

Roofing in Burnsville, Minnesota

Hail belt

Yes — a permit is required to replace a roof in Burnsville, MN, issued by City of Burnsville, Minnesota - Building Inspections Department. Homeowners or licensed contractors apply online for the Roofing, Siding, Window & Door Permit. Before the roof is inspected, photos of the ice and water barrier and house wrap must be emailed to [email protected] or dropped off at City Hall; the City of Burnsville allows these photos to substitute for an in-person inspection of that installation, and a final inspection is then scheduled. Windows or doors installed in new or altered openings require a separate framing inspection. The building permit must be available at the time of inspection. Existing shingles may not be re-covered -- Burnsville requires full tear-off before new asphalt shingles are installed. Burnsville, Minnesota sits in one of the country's most hail-prone regions. This hub aggregates Burnsville's roofing permit and contractor-registration requirements and impact-resistant material options — every fact linked to its sourced directory record.

Roofing permits & building code in Burnsville

Roofing permit and contractor-licensing rules in Burnsville are set locally by City of Burnsville, Minnesota - Building Inspections Department. Minnesota requires a state Residential Roofer (RR) license from the Department of Labor and Industry to contract residential roofing work — roofing is expressly excluded from the single-special-skill exemption other trades can use, and the only relief is an affirmative Certificate of Exemption for small operators — and the Minnesota State Building Code applies statewide, so a city cannot adopt different roofing-code provisions, only its own permit administration and fees — always confirm the current requirements with the authority before starting work.

Roofing permit
Required
Contractor registration
Required
Adopted building code
STATE-GOVERNED, NOT CITY-SET. Minn. Stat. Section 326B.121, subdivision 1(a)-(b), read in full, states: "(a) The State Building Code is the standard that applies statewide for the construction, reconstruction, alteration, repair, and use of buildings and other structures of the type governed by the code. (b) The State Building Code supersedes the building code of any municipality." Subdivision 2(c) bars a municipality from requiring building code provisions "different from any provision of the State Building Code." That code is Minn. Rules ch. 1309, the "Minnesota Residential Code," which under Minn. R. 1309.0010, subpart 1, incorporates by reference "the 2018 edition of the International Residential Code." Burnsville's own hosted resource for property owners (a Minnesota Department of Labor and Industry re-siding handout, distributed on the city's own Roofing, Siding, Window & Door Permit page) states directly: "The Minnesota State Building Code is the standard of construction for the entire state (Minnesota Statutes, section 326B.121). The 2020 Minnesota Residential Code adopts the 2018 International Residential Code (2018 IRC)." Burnsville's own codified Code of Ordinances (building-permits chapter) was not reachable this session (its host, municipalcodeonline.com, serves only an administrative editor application to automated tools), so no independent city-level amendment to Chapter 9 has been read; the state preemption in 326B.121 subd. 2(c) means none is legally possible in any case.
Registration details
  • license: Minnesota has a statewide mandatory Residential Roofer (RR) license, per Minn. Stat. Section 326B.805, subdivision 1, read in full: "A person who meets the definition of a residential roofer as defined in section 326B.802, subdivision 14, must be licensed by the commissioner as a residential roofer, residential building contractor, or residential remodeler," enforced statewide with a $15,000 gross-annual-receipts exemption threshold (subd. 6, clause (5)) requiring an affidavit and certificate of exemption from the commissioner. Administered by the Minnesota Department of Labor and Industry, not the City of Burnsville. Burnsville's own Roofing, Siding, Window & Door Permit page names the permit issuee as "A homeowner or licensed contractor," and the city's Permits & Licenses page (read in full) lists no separate city-issued roofing, building, or general contractor license -- the only contractor-specific city license on that list is a commercial-only Tree Contractor License -- consistent with Burnsville imposing no additional city-level roofing-contractor registration on top of the state RR license.
Permit process
Homeowners or licensed contractors apply online for the Roofing, Siding, Window & Door Permit. Before the roof is inspected, photos of the ice and water barrier and house wrap must be emailed to [email protected] or dropped off at City Hall; the City of Burnsville allows these photos to substitute for an in-person inspection of that installation, and a final inspection is then scheduled. Windows or doors installed in new or altered openings require a separate framing inspection. The building permit must be available at the time of inspection. Existing shingles may not be re-covered -- Burnsville requires full tear-off before new asphalt shingles are installed.

View the full Burnsville permitting authority record →

Impact-resistant roofing materials for Burnsville hail

Burnsville, Minnesota sits in one of the country's most hail-prone regions. For hail exposure, the highest impact rating a roof covering can earn is UL 2218 Class 4. These cataloged material categories reach Class 4:

Browse every option on the Class 4 impact-resistant materials hub, and read the Class 4 impact-resistant shingles buyer's guide. Many insurers offer premium credits for a documented Class 4 roof — confirm terms with your carrier.

Sources