The Roofing Book

Permitting Authorities / City of Kennewick - Building Safety Division

Do you need a permit to replace a roof in Kennewick, WA?

Adopted code

City of Kennewick - Building Safety Division

The City of Kennewick Building Safety Division, at 210 W 6th Avenue, provides building plan review and inspection services and handles building permits in Kennewick, in Benton County. The Washington State Building Code, including the 2021 International Residential Code as amended by the State Building Code Council, applies in Kennewick as it does in every Washington city. This listing covers the office's contact details and the rules state law sets for every Washington city; it does not cover Kennewick's own permit rules.

Jurisdiction
City of Kennewick, Washington
Jurisdiction type
city
Address
210 W 6th Avenue, Kennewick, WA 99336
Contact
  • url: https://www.go2kennewick.com/151/Building-Services
  • phone: 509-585-4561
Permit portal
Permit portal
Contractor registration required
Required
Adopted code
The 2021 International Residential Code, as adopted and amended by the State Building Code Council in chapter 51-51 of the Washington Administrative Code. WAC 51-51-003 adopts "The 2021 edition of the International Residential Code as published by the International Code Council" by reference "with the following additions, deletions, and exceptions," and WAC 51-51-008 says it "shall become effective in all counties and cities of this state on March 15, 2024." State law makes this code mandatory everywhere: "there shall be in effect in all counties and cities the state building code" (RCW 19.27.031(1)), which "shall be enforced by the counties and cities" (RCW 19.27.050). The State's changes to Chapter 9, Roof Assemblies, consist of one section on secondary roof drains and overflow scuppers (WAC 51-51-0903, Section R903.4.1). A city or county may amend the state code, but "the amendments shall not result in a code that is less than the minimum performance standards and objectives contained in the state building code," and "no amendment ... that affects single-family or multifamily residential buildings shall be effective unless the amendment is approved by the building code council" (RCW 19.27.060(1) and (1)(a)). Amendments to administrative provisions need not be submitted for that approval if they "do not alter the construction requirements" (WAC 51-04-030(4), Exception). This record did not read this city's own amendments to the state code. Everything above is Washington state law, the same in every city. In Kennewick, the city's own Building Safety Division provides plan review and inspection services and interprets the model codes and Kennewick Municipal Codes relating to building safety, and the city takes building permit applications through its online building permitting.

Local roofing hub

Roofing in Kennewick, WashingtonCity hub

More roof permit pages in Washington

Kent, WARoof permit Lacey, WARoof permit Lakewood, WARoof permit Marysville, WARoof permit Olympia, WARoof permit Roofing in WashingtonState hub

Related guides

Denver-Metro Roofing Permits Filing a Hail Insurance Claim Colorado Hail Season Prep Hiring a Contractor

Sources

Roofing questions: Kennewick, WA

Do roofing contractors need a license or registration in Kennewick, WA?

Yes.

What building code does Kennewick, WA use?

The 2021 International Residential Code, as adopted and amended by the State Building Code Council in chapter 51-51 of the Washington Administrative Code. WAC 51-51-003 adopts "The 2021 edition of the International Residential Code as published by the International Code Council" by reference "with the following additions, deletions, and exceptions," and WAC 51-51-008 says it "shall become effective in all counties and cities of this state on March 15, 2024." State law makes this code mandatory everywhere: "there shall be in effect in all counties and cities the state building code" (RCW 19.27.031(1)), which "shall be enforced by the counties and cities" (RCW 19.27.050). The State's changes to Chapter 9, Roof Assemblies, consist of one section on secondary roof drains and overflow scuppers (WAC 51-51-0903, Section R903.4.1). A city or county may amend the state code, but "the amendments shall not result in a code that is less than the minimum performance standards and objectives contained in the state building code," and "no amendment ... that affects single-family or multifamily residential buildings shall be effective unless the amendment is approved by the building code council" (RCW 19.27.060(1) and (1)(a)). Amendments to administrative provisions need not be submitted for that approval if they "do not alter the construction requirements" (WAC 51-04-030(4), Exception). This record did not read this city's own amendments to the state code. Everything above is Washington state law, the same in every city. In Kennewick, the city's own Building Safety Division provides plan review and inspection services and interprets the model codes and Kennewick Municipal Codes relating to building safety, and the city takes building permit applications through its online building permitting.