The Roofing Book

Permitting Authorities / City of Colville - Building Department

Do you need a permit to replace a roof in Colville, WA?

Adopted code

City of Colville - Building Department

The City of Colville Building Department, in the Building and Planning office at 1044 N. Lincoln Street, issues building permits in Colville. The Washington State building code applies in Colville as it does in every Washington city and county. This listing covers the office's contact details and the rules state law sets for every Washington town; it does not cover Colville's own permit rules.

Jurisdiction
City of Colville, Washington
Jurisdiction type
city
Address
1044 N. Lincoln Street, Colville, WA 99114
Contact
  • url: https://www.colville.wa.us/pview.aspx?id=35930&catid=461
  • phone: 509-684-5096
Contractor registration required
Required
Adopted code
The 2021 International Residential Code, as adopted and amended by the State Building Code Council in chapter 51-51 of the Washington Administrative Code. WAC 51-51-003 adopts "The 2021 edition of the International Residential Code as published by the International Code Council" by reference "with the following additions, deletions, and exceptions," and WAC 51-51-008 says it "shall become effective in all counties and cities of this state on March 15, 2024." State law makes this code mandatory everywhere: "there shall be in effect in all counties and cities the state building code" (RCW 19.27.031(1)), which "shall be enforced by the counties and cities" (RCW 19.27.050). The State's changes to Chapter 9, Roof Assemblies, consist of one section on secondary roof drains and overflow scuppers (WAC 51-51-0903, Section R903.4.1). A city or county may amend the state code, but "the amendments shall not result in a code that is less than the minimum performance standards and objectives contained in the state building code," and "no amendment ... that affects single-family or multifamily residential buildings shall be effective unless the amendment is approved by the building code council" (RCW 19.27.060(1) and (1)(a)). Amendments to administrative provisions need not be submitted for that approval if they "do not alter the construction requirements" (WAC 51-04-030(4), Exception). This record did not read this city's own amendments to the state code. Everything above is Washington state law, the same in every city. In Colville the city's own Building Department oversees construction within the city limits and issues building permits, and the city's page says Colville follows the building codes as adopted and amended by the Washington State Building Code Council.

Local roofing hub

Roofing in Colville, WashingtonCity hub

More roof permit pages in Washington

Cosmopolis, WARoof permit Coupeville, WARoof permit Darrington, WARoof permit Deer Park, WARoof permit Des Moines, WARoof permit Roofing in WashingtonState hub

Related guides

Denver-Metro Roofing Permits Filing a Hail Insurance Claim Colorado Hail Season Prep Hiring a Contractor

Sources

Roofing questions: Colville, WA

Do roofing contractors need a license or registration in Colville, WA?

Yes.

What building code does Colville, WA use?

The 2021 International Residential Code, as adopted and amended by the State Building Code Council in chapter 51-51 of the Washington Administrative Code. WAC 51-51-003 adopts "The 2021 edition of the International Residential Code as published by the International Code Council" by reference "with the following additions, deletions, and exceptions," and WAC 51-51-008 says it "shall become effective in all counties and cities of this state on March 15, 2024." State law makes this code mandatory everywhere: "there shall be in effect in all counties and cities the state building code" (RCW 19.27.031(1)), which "shall be enforced by the counties and cities" (RCW 19.27.050). The State's changes to Chapter 9, Roof Assemblies, consist of one section on secondary roof drains and overflow scuppers (WAC 51-51-0903, Section R903.4.1). A city or county may amend the state code, but "the amendments shall not result in a code that is less than the minimum performance standards and objectives contained in the state building code," and "no amendment ... that affects single-family or multifamily residential buildings shall be effective unless the amendment is approved by the building code council" (RCW 19.27.060(1) and (1)(a)). Amendments to administrative provisions need not be submitted for that approval if they "do not alter the construction requirements" (WAC 51-04-030(4), Exception). This record did not read this city's own amendments to the state code. Everything above is Washington state law, the same in every city. In Colville the city's own Building Department oversees construction within the city limits and issues building permits, and the city's page says Colville follows the building codes as adopted and amended by the Washington State Building Code Council.